Here comes another stupid question   I'll try to keep the synopsis as short as possible. So here goes, some time ago I had an issue that was tracked down to clogged injectors. Had them replaced and all was good. Years later the same problem arises so this time i change the injectors myself. Car would start surge and then stall. Would not run above 2k. would start high then drop then stall. Let the mechanic look at it, God only knows what he did, but now it ran above 2k but idle wo

Hi everyone,   I am after enough washers to re-build 2 sets of rear calipers. The actual part I am after is what's called a "belleville" washer, it is part of the hand-brake (e-brake) system in the rear caliper. When stacked over each other they work as spring. Someone at MMC was most likely smoking meth when they designed the rear calipers for this car because it is weird, painfully complex and disintegrates into dust with a little moisture exposure. The Mitsubishi part number is

ISO: A/C vacuum hose that goes from compressor low pressure / vacuum side toward evaporator  

I'm finally getting car ready to go! https://www.instagram.com/reel/Cb5q6jHAH7n/?igshid=YmMyMTA2M2Y=