Jump to content

    Swapped a new sensor into my secondary fan rad sensor and fusible links started smoking

    The_Ginger_Stig
    By The_Ginger_Stig,
    I've been having a ton of cooling problems in the Arizona heat, gauge gets close to 3/4 and I have to panic park and wait . So I figured replacing the secondary fan sensor that was broken (it spun inside the housing) would maybe help alleviate some heat. I ordered a 180 degree thermo-sensor because the goal was to get both of the fans to come on to try and cool it down a little. While I was checking the secondary fan by simply grounding out the connector I noticed something weird. The AC fan tur

    eBay: New accelerator cable

    TexasQuest
    By TexasQuest,
    Pioneer Cables Carburetor Accelerator Cable for Conquest, Starion CA-8867 | eBay

    Arizona during Monsoon today

    Caliber308
    By Caliber308,

    How to remove and reinstall the dashboard

    kev
    By kev,
    The following thread contains step by step instructions on how to remove and reinstall a starquest dashboard.   This process was performed on an 88 conquest tsi, although it is compatible for 86-89 cars.  It can also be used on 83-85 models with a few minor variations, particularly the lack of a knee panel under the steering console on the earlier model cars.  I do explain the differences noted between the years within the write-up. This process is pretty simple and straightforward and does

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...