partsnmotion

Uncracked, stress relieved, and unported. $75 plus flat rate shipping. Call or text me 972-489-3661 for pictures on my phone. I have boxes of other parts that i will sell cheap

89 auto with no engine with auto trans, 87 parts car with the nose gone, but has complete engine with 5 speed and good interior the 89 has factory sunroof, the interior is pretty dirty, just been sitting, has pretty decent nittos. for any questions, it is best that you call or text me at 972-489-3661. i also have pix on my phone that i can send

specially considering how simple your long block is

good for you Joe, you have worked hard and have put alot into your car. you deserve the respect!!

hey, im the guy that bought your translator, just wondering if you have shipped it yet. text me or call me back please at 972-489-3661. i lost your number

it sounds like your talking about the outer rocker panel or a rocker moulding .if its a hard plastic or hard rubber that is cracked, you can go to your local auto paint store and ask for a bumper repair kit. its a 2 part epoxy. this is assuming im talking about the rt piece

absolutely!! i still mess with it everytime i drive, it kinda sux because there is no file capabilities. so its constantly tune as you go. i hate how you tune in the morning, and get it running nice, then in the afternoon, time to do it again. i do like the the adjustabilty though. im taking it to the rkc track event next thu to see how it runs with the cooler air. each time i took it to the track, its been super hot and all teh turbo cars were running around .5 slower than normal. im hoping for the same difference

no, has a 14b, translator, afc neo, and a 52 mm throttle body, and now it has a lil homemade nitrous set up that i havent been able to do alot of testing with just yet

i tell ya, with life being so busy and trying to survive, i have forgot how much fun having one of these cars can be. now that have this one (which makes #3) i have been driving the hell out it

http://www.youtube.com/user/DFWcharityracing#p/u/5/L9kiFFUVbYU http://www.youtube.com/user/DFWcharityracing#p/u/10/KdiCr0x2PRM http://www.youtube.com/user/DFWcharityracing#p/u/1/UTYVw8GhHQQ heres 3 other ones where we were at one of our charity track events

the story behind this, i traded dan brew for his white 89, and ever since, i had some guys constantly on me to race. after 2 months i gave in, and this was the result

http://www.facebook.com/?ref=home#!/video/video.php?v=1283506066518 this vid was taken from my cell phone and directly uploaded to my facebook. getting ready to race the gtp http://www.youtube.com/watch?v=a2KzooUs4Sw race 1 http://www.youtube.com/watch?v=LU_6kjlGCiU race 2

http://i383.photobucket.com/albums/oo278/dreckte/secret/DGE-IF_meet4_3.jpg

http://www.dfwcharityracing.com/forums/showthread.php?t=2632 seeing that i have 2 quests and there is going to be 1 or 2 others at this event, i thought i would invite any of you guys that may want to come out. we are a 501©3 charity. we raise money via gearhead events to help families with special needs children. sorry i dont post much these days, but the charity keeps me pretty busy

you can buy books and videos on how to degree a cam through jegs and summit

Where: River Bottom Cafe 2425 Ne Green Oaks Blvd Arlington, Tx When: Saturday June 21st at 2pm Phone Number: 817-633-0898 Come represent your team, meet CRL members, make callouts, and eat some great food! Staff will be present as well to answer any questions you may have about the CRL. Don't worry if you can't make it. We are planning on doing this monthly. RULES: We just ask to remember YOU are representing your team(website) and to use your best judgement. this is our meet and greet/ racers meet the next racing event will be june 22nd at northstar dragway in sanger(just north of denton) for anyone that wants to be involved. gates open at 11 and we have the track till 6p.m.

for those that dont know, we have started a charity racing league in the dfw area. our next event will be june 22nd and if you are with a team, you get in free and racers only pay their tech card fee $5 gates open from 11-6, so come on out and have a good time with us and watch some good racing. since i know you guys missed the last event, here are a few vids of what all was missed http://s18.photobucket.com/albums/b132/rac...nt=P5310217.flv have you ever seen a diesel powered funny car before.. or http://videos.streetfire.net/video/DFW-Cha...cing_164463.htm http://www.youtube.com/watch?v=6i_xJb1x7JE

ceramic coated in black all stoak, no porting or anything selling for what it cost to get coated $75 plus shipping we also have paypal 972-489-3661/tim

a/c, alt bracket, powdercoated $15 each, one white, the other red stock uncut powdercoated airfilter canisters $15 each, one white, the other red center latch/radiator support powdercoated red ceramic coated turbo exhaust housing in black $75 stock oil pan powdercoated red,silver and high gloss black $15 each 2 5 speed trannys $50 each brake master cyl. and booster $50 powdercoated steering box's housing red,white,fiji blue, and high gloss black $15 each powdercoated alt. housings,red,white,and fiji blue $15 i will have more items up as i get them coated all parts are plus shipping best way to get me is to call 972-489-3661/tim you can pm me, but it may be a few days before i get back to you

if i can get the trans gone through by then i will be there. fired off the car today, so i should be driving by fri

sorry guys, been working alot of hrs, and for some reason, i havent been getting my email notifications, so i didnt know i had pm's or posts i will find out how much it will be to ship wheels back and forth for you Alcyone i will answer all pm's rt now

$50 each on the wheels or $150 if all 4 r done at the same time,sandblasting is the easy part,so that really doesnt effect price

thought i would throw this out there for the group regular valve cover-$15 mitsu cover 3 color-$35 mitsu cover 2 color-$25 3-4 piece i/c pipes-$15 1-2 piece i/c pipes-$10 pulley sets----------$10 rad. shroud--------$10 intake---------------$10 air filter canister----$10 throttle body--------$10 i carry a very good reputation with the local starquest guys, you can also look me up by my phone number or company name on google if you want to see a little about me also, take a look at my photobucket at a few pieces i have done feel free to ask any questions or call me anytime hrs 8a.m.-11p.m. 7 days a week thanks http://smg.photobucket.com/albums/v219/partsnmotion/ topline coatings 972-489-3661/tim

yeah, the site is being built and not finished as you can see....if you google my number, you can see more about me as well

exhaust housings $40 exhaust manifold $40 both at same time $75 inside and out quick turn around you can check me out online google my phone number or my company name topline coatings 972-489-3661/tim