mandoknight

I have a spare starquest fuel tank Extremely clean inside, surface rust on the outside. Asking 150.00 or make me an offer, I have been away from the website for a while. local pick up only, I dont care to find that big of a box. I live outside of Adrian, MI.

I have a gas tank from an 87, located in Blissfield, MI. Clean. looking to get $50 OBO. Local pick up only. Thanks Chris

I am looking for a set of white side marker lights and a nice set of grills that go under the front windshield wipers. all other lights and signals are working. the car is as far as I can tell is road worthy, I have been taking the car up and down the road dialing the megasquirt in. the tach is not working at this time but I have another tach to try. and the fan controls are lighting up but the fan is not coming on. I am trouble shooting that as well. I have not driven any distance but I have not seen any problems. thanks Chris

I know this is not a neon sight but I figured that it was worth a try. I am looking for a 2 door neon with a standard tranny. One needing TLC is fine, its for a new project. Might Be willing to trade my 87 conquest project car. Im in extreen S.E. Michigan. just north of Toledo OH. Let me know. Thanks Chris

I am looking for a black front grill pieces that goes under the windshield wipers in front of the windshield, I need the clips that hold it in placle as well. shipped to 49228. thanks Chris

does it have an analog or digital dash. If digital. how much. thanks Chris

I am checking to see in there is anyone interested in burgundy seats in Michigan, they are average in wear and appearance. I just dont like the way Mitsubishi seats feel. I am thinking of price between 50 to 75 dooars for them I was hoping to find someone local who might be interested. South east MI. near Toledo Ohio. I can email pics if anyone is interested. Thanks Chris

ok, I am running the MS 2.2 fuel only. Currently 2.986 firmware. how does the MS know what size injectors you have connected. It just asks about what needed fuel info. thanks Chris

Can someone please help me with the info I need to get off the ground here. I am running a Megasquirt on a stock TB and want to run 2 secondary (1150cc) injectors. Give me everything I need to know. I know I am not asking for too much here. But if someone has done this, tell me the tables and settings. thanks Chris

David The part to be exact is in the 87-88 part catalog, manual transmission section page 15 part number 6. Let me know. Chris

I an in need of the rubber boot section that bolts to the interior floor and goes around the shift lever. Let me know Thanks Chris

Yes I did it, I had a set of 88 headrests and i tried to put them on 87 seats, I had to weld extensions on the rods that go into the seat back, and I also had to remove the seat back. Then I found that the angle of the headrest tilted forward, the angle was all wrong. so I decided against the shange and went back to the originals. later Chris

how much for front fenders, let me know. thanks Chris

nice to know there are good people with similar interest willing to help out like Gober803.

PM sent

I would be in for either 3/8 or 1/2 aluminum intake flange, Or 1/4 inch stainless. let me know. what you can do and how much. thanks Chris

87quest-tsi thanks for the info. That should do the trick for me thanks. Chris

I tried to find the value for stock coolant temperature sensors especially the coolant sesor values but no luck. I need the values for use of the megasquirt easytherm values. help please.

I have been working with different meteals to see what I could make work. I wish I could make the whole car out of stainless but I guess that would be too much time,LOL. I am now working with some sheet steel called galvinox it is supposed to be very rust resistant. I think drain holes are very much needed because of the inner metal being non rust resistant. I am probably fighting a losing battle with the rust but if I keep her washed I can keep it alive that much longer. later Chris

about the only way to take care of it is to get a replacement bumper frame. later Chris

I have a black roof liner if you want it for shipping cost only. P.M. me if your interested. Chris

If anyone knows where Michael avila (manvila1) lives could they swing by and see what he has done with the clutch (I payed him for) is at. Â I sent him 94 for a clutch and he kept giving me excuses about how the bank didnt want to clear the money order, Â It was writen from my bank (bank money order) he said that the M.O. cleared and that he was going to send it out. well no further response from him and he isnt checking his emails. Â So if manvila1 pops his head in ask him about it. thanks Chris

yes it seems that there is alot of places to catch water and mud, and proper draining is important, I dont have a goods answer for that one. I have alot of choices of how to make the weld. glue, silversolder or lead. I will try to keep up with picture as the work progresses. I plan on doing the same to the rear quarter panel as well. later Chris

 I am getting down to repairing some of my areas prone to rust and thiis is my easiest areas to start with.  the front passenger fender, right behind the front tire where water always sets and rusts up.  so I am repalcing the original area with replicated pieces made out of stainless steel. here is a pic or two of the original http://www-personal.umich.edu/~cgberry/DSC00229.JPG http://www-personal.umich.edu/~cgberry/DSC00228.JPG and a few of the old and new together http://www-personal.umich.edu/~cgberry/DSC00226.JPG http://www-personal.umich.edu/~cgberry/DSC00225.JPG http://www-personal.umich.edu/~cgberry/DSC00224.JPG its only the start, I will keep you up to date as it progesses. Thanks Chris

you can either go to your local mits dealer or jc whitney has them for our cars. Chris