jonesh242

Hi Jahjah, The color is a dark gun metallic pearl...although I can't see any pearl in...that's good because I'm not big on pearlescent colors. Anyway, it turned out better than anticipated. As for the mirrors...here are a couple closer pics: I got these mirrors off ebay for $50 (couldn't pass it up)...originally APR mirrors for a Celica that were way over priced. I removed the Celica bases and got the universal bases from Pegasus Racing in WI...I think you can buy the whole mirror with base for much less from Pegasus (much easier). They may have some different styles as well. I made the carbon base plate myself...you can get the raw materials from www.Fiberglast.com or just buy a prefabbed sheet and do some cutting. I made my own, but used the original rubber gasket (behind the stock mirror) to start a template. Let me know if you do this...there is one small hitch along the way...nothing major, just don't feel like typing a novel. From the front: http://i232.photobucket.com/albums/ee37/jonesh242/Starion040.jpg From the back: http://i232.photobucket.com/albums/ee37/jonesh242/Starion039.jpg

forgiveme, but I'm not sure which setup are you referring to? If its a 1G mas you're using then look up K&N filter for a 1G Eclipse or Eagle Talon TSI. Otherwise, if you're using the GM MAS, then it'd be a universal 3" OD filter. It will fit with your stock MAS, but you'll have to modify the canister to fit.

still available

Bump

Sorry, no ports on this one.

This bolts into the stock position and take little to no modifications to work...although I do recommend you get a liquid filled fuel gauge so you know what pressure your running. This was bought during the group buy and I never used it...still sitting in the original box it was shipped in. Selling because I already have an Aeromotive RRFPR. I'm not sure what these are going for now... $55 shipped Paypal Accepted. http://i232.photobucket.com/albums/ee37/jonesh242/Starion042.jpg http://i232.photobucket.com/albums/ee37/jonesh242/Starion041.jpg

Sorry so late Dad...working out kinks in my own car and forgot to reply...walked into the garage at 4pm and didn't get back into the house until 9pm. I did however measure the AHP at 3"...the coupling is tight going on, but fits right up with a little silicon spray for lube. I think a couple of the other guys who replied have similar setups as yours...should work ok. Let me know if your still interested or need additional information. Thanks, John

I think it'll work, but I'll measure the ID of the coupler for you tomorrow when I get back from the office.

*DM's Aluminum HP kit....intercooler is in the works...shouldn't be longer than a couple weeks. http://i232.photobucket.com/albums/ee37/jonesh242/Starion022.jpg http://i232.photobucket.com/albums/ee37/jonesh242/Starion025.jpg

There's all different blacks. I prefer black over any other black....OR...you could go with black. Personally, my all time favorite is black. But, it might be better to just go black...it's much better than plain black. But, it you really want to attact the women, black is best. however, if you're looking for the black look, but don't want to attact too much attention...go black. :biggrinumbrella1: :biggrinumbrella1: :rolleye0018: :surferdude: I had one black car...a black 1G eclipse GST...a nightmare to take car of...never again.

Qty (1) *DM Aluminum Hard Pipe...brand new! I bought a complete kit from Kelly and already had a polished AHP (which I'm keeping)...So, this one is for sale. Coupers are brand new high quality *DM units as are the stainless steel clamps. $70 Shipped. Paypal accepted. http://i232.photobucket.com/albums/ee37/jonesh242/Starion022.jpg

Qty (1) Mild Steel and Perfect working condition, minus a couple scratches from the usual wear-n-tear. Complete with nice couplers (not cheap imports) and nice stainless clamps (again, not the cheap ones). Selling because I went to a complete aluminum hardpipe kit and *DMs new intercooler. Space is a premium in my garage and this taking up room. Included is the knock off blow off valve...it worked better than any of the Turbo XS versions I had previously. Thanks, John $175 shipped. Paypal accepted. http://i232.photobucket.com/albums/ee37/jonesh242/Starion023.jpg http://i232.photobucket.com/albums/ee37/jonesh242/Starion021.jpg

Options are many... Here is mine... 9" 15 offset front 10" 12 offset rear 5Zigen FN01R-C Bronze http://i232.photobucket.com/albums/ee37/jonesh242/Starion018.jpg

Do you have any photos of your front bumper mods?...I like. I made a set of carbon base plates for my Starion and used some universal carbon APR mirrors (cheaper from Pegagus Racing in WI). I think they look alright...a bit small, but they do the job if adjusted properly...an improvement over stock in my opinion. I've also made a template for flat lower carbon fiber door panels. I'm getting ready to order the raw materials. The only challenge I have is how I'm going to mount the window controls...still working on that...will have to modify them or may have to get some aftermarket switches and mount in the lower door, dash or center counsel. My car is not a show car...it's more of play/track car w/ wally-weekender duties...LOL...plus it still holds my surf boards as long as there's nobody else in the car. Before paint job... http://i232.photobucket.com/albums/ee37/jonesh242/Picture186.jpg After paint job... http://i232.photobucket.com/albums/ee37/jonesh242/Starion018.jpg I'll post some pics once I get the door panels figured out.

For future reference (and everyone elses benefit), what is your paypal address? Thanks, John

Mindgame, Can I get the Part# for this item?..gonna try looking locally to see if anyones got one sitting instock. Thanks, John

PM Sent

Looking good...GIT-R-DONE! :nxsmile:

Thanks man...how bout those fog lights!...NOT to shabby huh?!! The car turned out a lil darker than planned, but worked well with the bronze rims anyway. The mirrors were more of an experiment to see how they would look, but they turned out pretty cool...although they are small. If I ever go back to the stockers, it'll be like watching traffic through my plasma TV...LOL. I'm turning my attention more to the engine and interior now. I have an autopower roll bar set up, but not sure if I just want to commit to a welded version. I also mocked up the carbon fiber door panels and a new center councel...just have to order raw materials and get building. Also, installing *DM's new intercooler and aluminum HP setup as soon as it's ready to go. I've already seen the intercooler at Kelly's...it's impressive. OH ya...gotta throw in an aeromotive fuel pressure regulator as well. Too much work and too little time to do it all. Take Care, John

The items in the link look white/orange...do have a picture of the actual items you are selling? Just a thought...as I didn't see any carbon fiber. Also, are these real carbon fiber or carbon "look"?

Added *DM's aluminum radiator to the mix...works awesome and looks great.

Excellant...please let us know how they turn out. I'm interested in these items as well. Header Panels would be a key item since almost no one has a decent header panel these days (including myself!).

I'll second that!

I had a great time hangin out with all you NorCal guys at MOD 08'...great meeting ya'll. I hope we can all do it again sooner than later. I may try to make up to NorCal for the infineon meet and Drift event in September. Take Care, John

:eek1bluegreen: Very interested!...PM me with a price when you have it. Thx, John