lgarbz

Thanks.

Is there a thread on that or do you have specs?

Need a known good fuel sending unit. Please pm me if you have one with a shipped price to 97405.

Tank is full. Gauge reads 1/4 tank. Where can u get a new sending unit or have it rebuilt?

So, I found the grounds for the rear harness in the shop manual. I cleaned them up really well and reinstalled the wires. I have power and ground present at the sending unit. I can command the low fuel switch on/off with my power probe. The yellow and black signal wire from the sending unit to the gauge is normally grounded, and when I apply 12v to is, the gauge goes up. Without applying 12v, the gauge reads right around 1/4 tank with the key on or engine running (I added $20 of gas 2 days ago). To me this indicates the sending unit is faulty, but since I'm fairly new to these cars, I wanted to see if there is anything else I should be checking first? Thanks in advance.

Can someone tell me where the the fuel sending unit grounds? I chased the harness to a joint connector by the tail light harness and then it goes up the driver side of the body. Where does the harness ground to the chassis?

First coat of primer done. http://i1148.photobucket.com/albums/o563/lgarbz/paint_zpsuxpp6jcm.jpg

Got a majority of the body work done. Started messing around with some epoxy primer and a new spray gun. I should have the whole body primed in the next few weeks. Finished all of my vacuum deletes. Installed Griffin radiator, and inline filler neck (previous owner welded filler neck closed.) Installed 2 hard pipes. She is running and driving again. As soon as the primer/paint is done, she's going into daily driver mode. http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150711_154429330_zpsoejndh5r.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150712_160951198_HDR_zpsjcmpuo3i.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150717_184438862_zpsmofqswsd.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150717_184449058_HDR_zps7ffjafbq.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150717_184453390_HDR_zpscssczbwc.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150725_155526296_zpsqbsuikgn.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150725_155558656_zpsxrqxmamp.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150711_153834246_zpsdoxycbrs.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150625_182403491_zpsbr6fynlh.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150627_185443330_HDR_zpstodc2qsl.jpg

Nothing that I know of. Just wanted to see if anyone was running any sort of engine dress up set ups? Plus a car that has been sitting over the 30+ years is bound to have some kind of deposits collecting in the cooler lines.

What kind of aftermarket oil cooler setups would you guys recommend?

Does anyone still make them? Or does anyone have one for sale?

Bump

G54bstore, $28 shipped. Pm me for my PayPal email.

I'll send you a tracking number when I ship in a day or two.

Found the bolts for the large heat shield.

Large heat shield still available. That one will be closer to $35 shipped because of the size. I can look for the bolts.

Heat shield shipped = $24 priority mail. Cooling fans shipped = $28 shipped priority mail. PM me if interested.

I'll get a shipping quote for the turbo shield and fans later today.

Bought a set from someone local. Thanks.

Where are you located. What kind of condition?

Cooling fans are 11". I will get a price for shipping on the heat shield tomorrow.

Looking for a motor preferably long block. I'm in Oregon but could possibly commute to washington, California, etc. Let me know what you have and where youre located.

I've got a few random parts for sale. Prices are for parts only, shipping will be added. Radiator - It's seen better days but could be saved. $20 Heat shields - $15 each for the large, $5 for the small. Evap canister with bracket $5 ABS unit with bracket $20 EGR parts $5 each Universal cooling fans $10 for the pair Stock exhaust system (not including down pipe) muffler is in good condition. No holes. Make offer Large heat shield sold. Over turbo and small shield still available. Cooling fans pending. http://i1148.photobucket.com/albums/o563/lgarbz/172_zpskhkbleme.jpg http://i1148.photobucket.com/albums/o563/lgarbz/173_zpsib0qnunx.jpg http://i1148.photobucket.com/albums/o563/lgarbz/174_zps1ydencni.jpg http://i1148.photobucket.com/albums/o563/lgarbz/175_zpsxfgclfl5.jpg http://i1148.photobucket.com/albums/o563/lgarbz/176_zpsopag4oqu.jpg http://i1148.photobucket.com/albums/o563/lgarbz/177_zps6vxxojzr.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150502_163818883_zpsiaeupj9p.jpg

More busy-work. http://i1148.photobucket.com/albums/o563/lgarbz/152_zpszswkwpjo.jpg http://i1148.photobucket.com/albums/o563/lgarbz/153_zpslmfsssvb.jpg http://i1148.photobucket.com/albums/o563/lgarbz/6d10fee8-6507-48ac-92aa-bd9ed43f2f76_zpsjbhcbqei.jpg http://i1148.photobucket.com/albums/o563/lgarbz/182_zps7zn5yy8d.jpg http://i1148.photobucket.com/albums/o563/lgarbz/180_zpsafqnwupy.jpg http://i1148.photobucket.com/albums/o563/lgarbz/181_zpsv1ylq85f.jpg http://i1148.photobucket.com/albums/o563/lgarbz/156_zps7jxytq51.jpg http://i1148.photobucket.com/albums/o563/lgarbz/154_zpsrpsdfyzy.jpg Also, bought a set of rust free fog light housings from someone here in OR. Planning on continuing the body work and get it prepped for paint.

Still looking for one if anyone has it?