Jump to content


  • Posts

  • Joined

  • Last visited

About lgarbz

  • Birthday 02/19/1993

Profile Information

  • Location
    United States
  • Gender

Previous Fields

  • Zip Code
  • Model
  • Type
  • Model Year
  • Transmission Type
  • Factory Color
    California Red
  • Interior Color
  • Status

lgarbz's Achievements


Newbie (1/14)



  1. Is there a thread on that or do you have specs?
  2. Need a known good fuel sending unit. Please pm me if you have one with a shipped price to 97405.
  3. Tank is full. Gauge reads 1/4 tank. Where can u get a new sending unit or have it rebuilt?
  4. So, I found the grounds for the rear harness in the shop manual. I cleaned them up really well and reinstalled the wires. I have power and ground present at the sending unit. I can command the low fuel switch on/off with my power probe. The yellow and black signal wire from the sending unit to the gauge is normally grounded, and when I apply 12v to is, the gauge goes up. Without applying 12v, the gauge reads right around 1/4 tank with the key on or engine running (I added $20 of gas 2 days ago). To me this indicates the sending unit is faulty, but since I'm fairly new to these cars, I wanted to see if there is anything else I should be checking first? Thanks in advance.
  5. Can someone tell me where the the fuel sending unit grounds? I chased the harness to a joint connector by the tail light harness and then it goes up the driver side of the body. Where does the harness ground to the chassis?
  6. First coat of primer done. http://i1148.photobucket.com/albums/o563/lgarbz/paint_zpsuxpp6jcm.jpg
  7. Got a majority of the body work done. Started messing around with some epoxy primer and a new spray gun. I should have the whole body primed in the next few weeks. Finished all of my vacuum deletes. Installed Griffin radiator, and inline filler neck (previous owner welded filler neck closed.) Installed 2 hard pipes. She is running and driving again. As soon as the primer/paint is done, she's going into daily driver mode. http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150711_154429330_zpsoejndh5r.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150712_160951198_HDR_zpsjcmpuo3i.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150717_184438862_zpsmofqswsd.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150717_184449058_HDR_zps7ffjafbq.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150717_184453390_HDR_zpscssczbwc.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150725_155526296_zpsqbsuikgn.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150725_155558656_zpsxrqxmamp.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150711_153834246_zpsdoxycbrs.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150625_182403491_zpsbr6fynlh.jpg http://i1148.photobucket.com/albums/o563/lgarbz/IMG_20150627_185443330_HDR_zpstodc2qsl.jpg
  8. Nothing that I know of. Just wanted to see if anyone was running any sort of engine dress up set ups? Plus a car that has been sitting over the 30+ years is bound to have some kind of deposits collecting in the cooler lines.
  9. What kind of aftermarket oil cooler setups would you guys recommend?
  10. Does anyone still make them? Or does anyone have one for sale?
  11. G54bstore, $28 shipped. Pm me for my PayPal email.
  12. I'll send you a tracking number when I ship in a day or two.
  13. Found the bolts for the large heat shield.
  • Create New...