apate

What do you guys think? Legit I'm leaning towards BS http://www.gfchips.com/dodgeconquesttsi.aspx

Looks Great !!! I wish they came like that from the factory.

I think it is a filter capacitor that hooks to the coil. It just keeps the hi frequency noise out of the radio.

I does seem pricey but it is a Starion not a Conquest Here are the Conquests in my area http://norfolk.craigslist.org/cto/3465124689.html this one is new http://norfolk.craigslist.org/cto/3319637657.html these two I have seen floating around on CL http://norfolk.craigslist.org/cto/3422959440.html

http://norfolk.craigslist.org/cto/3477132630.html

That video make me want to get a bike But I would probably kill myself So just stick to 4 wheels. Oh and about the blond chick That was sooo false advertising but still a cool video

I want one.

You missed it. It is on the far left and the reference designator is DZ it is connected across power and ground. I have updated the schematic with your corrections and I add the value for C1. We still have one component (the three legged IC) we do not know what it is. The software I used to draw the schematic is used to produce a PCB layout which we can send to a board house to fabricate. I was going to use SMT (surface mount technology) parts for the resistors and cap,

If anybody wants the schematic file just PM me your email I used Eagle to create the schematic It is free for small projects Here is the address http://www.cadsoftus...le/?language=en

It would be great if someone could ring out the board and verify my schematic is correct I used the pictures Charles took to draw the circuit so I might have missed something. Once I get a verification that the schematic and parts are right. I can make the board layout.

Here is the circuit. http://i1097.photobucket.com/albums/g350/apate1973/cars%20stuff/auto_down_sw_circuit1.jpg

Are there any numbers on the 3 legged IC at the bottom of the board? The yellow wires are covering the silkscreen below that IC. What is written there? One last question for now what are the dimensions of the board?

I think the white connector goes to the fog light relay.

The first pic That is the test port for the fuel pump. You hook up 12volt to that port and it turns on the fuel pump.

I just noticed his phone number he is missing a digit He probable will not get to many calls HA HA

Not mine saw this on CL and had to laugh http://norfolk.craigslist.org/cto/3411332582.html

Be careful if that wood is pine or sprus That wood will build up creosote in the chimney fast and can start a chimney fire

Charles I when out to my parts car which is a 89 and pulled the switch and it is not a auto-down someone must have replaced it. Looking at your picture I do not thing you are missing a resistor it looks like to me it is missing a glass bead diode or a capacitor . Look at the silkscreen under the resistors they are rectangular and the silkscreen under the missing part is rounded with a polarity line on it. and it does not look like it has a reference designation Can you take better pictures top and bottom of the board? I might be able to create a schematic of the board if I had better pics.

I was going to suggest mothballs but then I saw this http://www.hagerty.com/classic-car-articles-resources/HowTo/Storage-and-Transportation/All-articles/2009/12/02/Tips-to-Keep-Mice-out-of-Stored-Cars

It happen to me the second of driving my car at the gas station. I filled up and turned the key nothing. While I was under the hood a guy stopped and told me his father had two of these car sitting under a car port. He asked me if I wanted buy them. I said no not if they are going to run like this A couple months later I wrecked my quest and the same guy stopped at the wreck and told me his father still had the quest and did i want to buy them. I did

Bought battery tray and hold down from Dan, great part just a he described. Fast shipping. Would do business again

Glad to hear you figured it out.

Bad TPS?

I was just looking in the noob Q/A and saw a low boost post Are you running the stock pre cat? clogged?

Try this disconnect your secondary injector clip and see how it runs. If it runs the same secondary problem Another thing to try is swap primary and secondary clips see how it runs