-
Posts
500 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Calendar
Gallery
Posts posted by obsolete
-
-
Good deal. I bought a used Hobart 125 (w/ gas kit) and it's been a great investment.
-
http://grandforks.cr...4252227444.html
http://images.craigslist.org/00m0m_a6uKnqWYYjW_600x450.jpg
I'm posting this for a friend who registered for an account last week but is still waiting for it to be approved. I used to own this car; if you want to ask questions about it, you can contact him via the e-mail link, or if it's something simple I may be able to answer it here. Thanks for looking!
-
Didn't have time to grab a picture, but I spotted somebody towing a black flatty on a car dolly on Hwy. 94 west through Wisconsin, headed toward the twin cities. Somebody got a new project?
-
Ro_the1st: I sent you a PM.
bigjoe: With the A/C delete bracket, you tension the belt the old school way-pry the alt until the belt is tight, then torque down the bolt.
-
Sorry Tim, I don't mean to confuse anyone by using the word "rebuilt". I wiped down the case with carb cleaner, replaced the brushes, resurfaced the slip rings, and added fresh grease where needed. This is more of a quick refresh than a professional rebuild. It's definitely a step up from a junkyard alt, and a lot cheaper than retail.
-
Pics of the A/C delete bracket:
http://i41.tinypic.com/2cqio82.jpg
http://i44.tinypic.com/znaixj.jpg
-
These have been for sale forever.
-
I pulled this alternator from my '87, cleaned it up, and rebuilt it with new brushes and hi-temp synthetic grease. Tested and charges great. See pics below. $35 + shipping.
I also have an OEM MItsubishi A/C delete bracket. This replaces the huge A/C compressor mount on the side of your engine with a small bracket for mounting the alternator only. $15 + shipping.
Buy them together and save on shipping.
http://i39.tinypic.com/ao7xy0.jpg
http://i41.tinypic.com/2dgpded.jpg
-
Queens of the Stone Age - Like Clockwork
The whole album.
-
Well, that looks like a frickin' steal.
-
Thanks everyone!
SOLD
-
These aren't HID; they come with regular H4 halogen bulbs, which will give the beam pattern pictured in the example photos above. The housings are plug and play.
If you want to go HID, the retrofit kits are reported to work well in these housings. Robert (Komeuppance) has a nice thread you can look up.
-
Thanks, that's exactly what I was looking for. I forgot these are sold as pairs instead of single lights. Price updated to $40 shipped. This is the exact item I am selling: http://www.ebay.com/itm/330897426583
-
Can you get these cheaper anywhere else?
-
These are brand new, still in the boxes.
-
SOLD
These are the popular ones that work well with HID kits. Even with regular halogens, they are brighter and have a much better beam pattern than DOT sealed beams. If you still have stock headlights, these are a no-brainer upgrade. All glass and metal construction, H4 halogen bulbs included. $40 for the pair includes shipping to the lower 48. Will ship elsewhere, ask for a quote.
Example (from a Jeep forum) comparing DOT sealed beams to AutoPal E-Code:
http://betterautomotivelighting.files.wordpress.com/2012/06/100_1762.jpg
http://www.fototime.com/84685B4B71C4772/standard.jpg
http://i43.tinypic.com/s10z6c.jpg
-
I have a good mirror and side spoiler piece for you. They are red and were painted not too long ago, although I'm not sure the color is a perfect factory match. I have the door handle too if you want it; it's a bit faded but in good shape otherwise.
-
http://nyfd.com/queens_engines/engine_258/E258_logos.jpg
-
Booster was sold a couple weeks ago. I don't want to turn this into a for sale thread, so I'll send you a PM.
-
-
Fuel tank side will hook right up with the 12mm hose barb. You'll have to do something if you want the -6 AN to work on the pressure side, though. I was planning on just using a braided -6 AN hose from Summit to replace the old OEM rubber one. I don't trust 25 year old rubber hoses for high pressure fuel...
-
Last chance before eBay.
-
Still available.
-
Thanks! I was lucky and scored the perfect size box from work. Went through a whole roll of bubble wrap though
2014 Parts Sale, updated 2/17 - New Items, Price Drops!
in Parts for sale
Posted · Edited by obsolete
Keep checking this thread, as I will continue to post new items as I organize and take pictures of them. I charge actual USPS shipping from 55901, ask me for a quote. Anything that says free with purchase can be thrown in with any order that includes at least one item with a price on it. Only one free item per order, please. Feel free to make offers on anything. I will do package deals. My feedback thread is here.
Update: Wow, what a response! I've moved unclaimed items up to the top of the list. Everything with a strikethrough has been claimed by someone either in this thread or via PM. Items that have been paid for are removed from the list.
Steering center link complete with idler arm, tie rods, tie rod ends, and ball joints. Everything is in good shape, and all the grease boots are intact, including the ones on the center link. I was told this was "low mileage" when I bought it, but I don't really know. The ball joints on the center link have a little play in them, but if the steering on your car is getting really loose, this will probably be an upgrade for you. $75
http://i.imgur.com/GzRWT0c.jpg
ISC & MPS. Clean, tested good. $60
http://i.imgur.com/AKaBZff.jpg | http://i.imgur.com/OJXnXSW.jpg | http://i.imgur.com/Bsc9FiR.jpg
Good sweep-tested TPS. $50
http://i.imgur.com/TPdpC5y.jpg | http://i.imgur.com/u2XHNmo.jpg | http://i.imgur.com/3jJQQOG.jpg
3G MAF with 4" cone filter adapter and K&N filter. MAF is a "501" that's had the restrictor removed to flow like an Evo MAF. The smaller 3G fits a lot easier in the engine bay than the bulky 2G and is a lot easier to find couplers for because it's round instead of oval. Filter is pre-oiled and ready to go. You will need a MAF-T Gen2 or other piggyback to tune for this. $45
http://i.imgur.com/05WD4ST.jpg | http://i.imgur.com/hBrbGIk.jpg
Instrument cluster with 104k miles. Trip odometer reset button is not broken! Something got onto the lens, not sure what it is. Windex doesn't do much to it, I haven't tried anything stronger. If I was going to use it I'd try a headlamp polishing kit or just swap lenses. $40
http://i.imgur.com/rSNVYqf.jpg | http://i.imgur.com/jB3JtQs.jpg | http://i.imgur.com/EHAX7JW.jpg
Driver's side Conquest tail light. Decent condition for a driver/non-show car. A few small cracks around the reverse light. $20
http://i.imgur.com/e7BhbIx.jpg | http://i.imgur.com/m6Se8Mi.jpg | http://i.imgur.com/EGFybff.jpg | http://i.imgur.com/pOvFbCa.jpg
Steel coolant pipe. This is the one that runs behind the block and along the passenger's side. These rust out over the years and start to leak, this one is solid. $20
http://i.imgur.com/LDZPidX.jpg | http://i.imgur.com/cJ2JvOo.jpg
Aftermarket fuel filter setup with rebuilt stock fuel lines. Uses a standard 5/16" hose barb fuel filter which is easy to find in any parts store and eliminates the restriction of the stock banjo bolts. Have you seen how tiny the orifices in those things are? All your fuel has to flow through those tiny holes! Uses stock fittings on both ends, rebuilt with Oetiker clamps and brand new Gates fuel injection hose rated for E85 use. $20
http://i.imgur.com/CekLRKO.jpg | http://i.imgur.com/mra99ca.jpg | http://i.imgur.com/oW9qeGx.jpg
K&N drop-in filter for stock air can. Previous owner didn't oil it, so it didn't pick up much dirt...should be really easy to clean. $15
http://i.imgur.com/1v6Uhkr.jpg | http://i.imgur.com/uHV4DtN.jpg
Starter motor. Works great. Remanufactured by "World Class" in Japan, not sure how long ago. $10
http://i.imgur.com/uDdJ4xN.jpg | http://i.imgur.com/WN1wKoA.jpg
Primary 87-89 black fuel injector. Plastic ring at the top is cracked, does not affect performance. Works well. $10
http://i.imgur.com/WxwFY14.jpg | http://i.imgur.com/S8aWsTG.jpg | http://i.imgur.com/2aaIS9e.jpg | http://i.imgur.com/9aUuodI.jpg
Packard/United Ignition plug wire set. These are at least as good as the wires that Technology made 500HP on! $10
http://i.imgur.com/CEjrpkW.jpg | http://i.imgur.com/vwz7RD1.jpg
Custom coolant overflow bottle from '99 Mirage. Mounting bracket welded onto intercooler pipe, painted gloss black. This fits if you have an aftermarket intake and emissions deleted. Occupies only a tiny amount of engine bay space, and frees up the space the old overflow bottle used to take up. I was so happy when I came up with this, I hope somebody can use it. $10
http://i.imgur.com/T7g7lCw.jpg | http://i.imgur.com/7CAs2JY.jpg | http://i.imgur.com/7RGhc9k.jpg | http://i.imgur.com/VTwfpoH.jpg
Battery tray. Was cleaned and painted with POR-15, but I used it for a while and the battery rubbed some of the paint off. Still in nice shape. $5
http://i.imgur.com/6aekGXr.jpg | http://i.imgur.com/2H1ZT3m.jpg
Brake booster vacuum hose tee/check valve. free with purchase
http://i.imgur.com/wMUsNVi.jpg
Knock sensor. Looks like it was opened up and modified? Not sure what's up with that, but car ran great with it. free with purchase
http://i.imgur.com/qs2yXxL.jpg | http://i.imgur.com/UkElnXa.jpg
Intercooler coupler elbow made from spare radiator hose. It ain't fancy, but it beats your hard-as-a-rock 25-year-old OEM rubber. free with purchase
http://i.imgur.com/cgYmFma.jpg | http://i.imgur.com/2xifbbn.jpg
Stock oil separator. Clean inside. Dented a bit? Not sure if it's supposed to be like that or not. free with purchase
http://i.imgur.com/HixpkiH.jpg | http://i.imgur.com/M6NEBOI.jpg | http://i.imgur.com/wmlWnN3.jpg
Stock turbo coolant line. free with purchase
http://i.imgur.com/3243waK.jpg | http://i.imgur.com/IAWWUF9.jpg
Stock air can, if someone wants one for some reason. free with purchase
http://i.imgur.com/VlUjTII.jpg | http://i.imgur.com/OfXo3TQ.jp
g