2fast2six

also abs deleted*

proportioning valve ?

hose from brake booster does not have a check valve in it and also is connected to an intake port

yea sometimes the brake pedal is rock hard as soon as i push the pedal down and the brakes drag until i drive for a couple blocks then they seem to not drag

yes i did replace the master cylinder ...what do you mean by the clearance between the master piston and booster rod? what do i gotta do?

lubed the sliders... still dragging, it sounds like something is like making a air popping sound when i apply pressure to the brakes

what do the sliders need to be lubed with?

okay so i have a 1987 conquest and the car had been sitting for awhile before i bought it and the front brakes would grab and drag to the point where it felt like i was stepping on the brakes. so i checked the pads out in the front and the inside pads where shot and the outside pads still had some meat on them. so i figured my brake calipers were sticking. i went to the store and bought new front brake pads, 2 new calipers with hardware, turned the rotors, replaced both rubber brake line hoses from the calipers on both sides. i had also replaced the brake master cylinder at this time and bench bled it and cleaned out the brake fluid res. ..... now that everything is replaced im still getting the same problem but is periodic and im getting hella brake dust on my rims and looks like crap... so brake booster maybe? .

http://minneapolis.craigslist.org/dak/cto/3458162704.html

i actually have this same issue with my sachs clutch i bought with the clutch pedal not releasing all the way in between shifts. never figured it out

havent found any leaks but im going way under 10 on my wideband under boost. doesent wanna be driven hard under boost. but drives perfect other than the wayyy to much fuel going into engine

pics would be good and we could go from there. my rims are powder coated black in middle and have polished lips

SOLD!!!

ill give it a day here or so to see if his paypal goes through. ill let you know jabbott126

sale pending!!!

like the title says lookin for just one single 8" SHP rim. no curb rash or bends please.

need gone these are the soft bushing and arent the hard ones! new never been installed

bump!

they arent like bricks they are soft

not sure on the assembly lube. just came in the box when i got the bushings.

up for sale is a set of bushings $220 plus shipping and handling still have the lube packets

would starquests be able to spool a turbo this big ? i have here a nice T4 turbo with a compressor side of AR .70 and a hot side AR .68 looks like this t4 would def need a custom manifold to bolt to and it looks like it would bolt upside down? and how would the exhaust fab up to it? seems to only be oil cooled no coolant.