TERRY53

yes only one plug.. how would you like your payment made ?

hi there, i'm looking for overflow tank, 6 plastic clips for cowling of wipers. the large nut holding the wiper linkage.. Terry for a 86

I Need one for 86.... built oct 85.

thanks, i'll check later to see if you find it. Terry

yes i found a loose wire an it fell off while testing it. also another wire had a bare spot. looks like it needs replacing too.. thanks alot Indiana

thanks, what are asking for it.. or we could trade some parts. Terry

thanks Indiana. looks like there hard to find.

looking for a isc for a 86 starion. has four wires. hows 30 sound thanks terry

what years will fit 1986 turbo intercooled. my "isc" is a four wire one. thanks for all your help terry.

looking for a idle speed control for 86 starion.

still have any parts. need a " isc" for 86. thanks Terry

hey dave, do you have a isc servo assembly 1986 starion. also splined arm assy for passenger wiper plus nut.an overflow tank,an two clips for wiper assy cover . thanks terry , zip code 52806

Lets start of saying that everthing is stock an 86 starion. Has a new injector in the fender side of mixing bowl. an thats the one thats seems to not be working. since i switched the injector clips an engine still stalled . Thats going my what i read the both fire at the same time.. only running on valve cover side injector. Could the filter screen be clogged in the injector retainer? Terry

all i need is the spline part for the wiper arm with the nut.. since mine was not threaded right, so i need to do is replace that part no linkage needed.. terry

my zip code is 52806 in iowa

how about 86 burgandy seat driver side, wiper linkage passenger side an overflow tank.

still have parts

yes its a 86 . looks like i need to go thru all the hoses. thanks shelby

yes it reads 0 when keys off.. looked at turbine wheel, noticed there was a few chips on the wheel. still dont see why it would read like that.. . it been a while since i ran the car. because of various problems.. since everone knows not alot of shops can fix them. i been letting it sit. but since i found this site, i decide to work on it once again...

the gauge for boost. in the center of the dash. reads between 7 and 14 lbs at idle. once i apply throttle, the engine bogs down. must apply throttle slowly or engine will loses power.

car runs with 7 lbs of boost at idle, not sure whats causing this problem. would like a some help with this....