87quest'

Are you still looking for a turbo?

Still available?

check to see that the ground cable that you hook up to the starter isnt dirty or coroded. i also had a problem like that with my starquest but it was my battery terminals were really dirty. sometimes its the simple stuff that can stump you

thanks mike your pretty smart at this stuff and yea the kid that had it before me prolly through away that tank so i know where a few parts cars are around here so ill to take a look to see if they still have them and the car is and 87

so what if you dont have the stock air box but the hoses are still there?

ok so im not postive if its the oil return but its the hose on the passenger side of the car. iv had someone explain it to me but is it possible that i could get a piture

can i get a diagram of this please

AHHHH really haha mann i love your car...FML

oh wow haha i could not stop lauging at this

I am looking for a coolent line that runs from the side of the turbo to the top of the water neck. I am also looking for a bolt that holds the cam gear onto the cam... the engine is the G54B for a 1987 chrysler conquest my local auto parts stores claim that they cant get these parts in for me. so today im going to go to the chrysler dealership and see what they have to say and maybe they can get them in..but just in case i want to check to see if any of you guys or girls may have be able to sell these... thanks for reading

ok thanks ill have to look at that..also when i bought the car it didnt have a bolt that goes into the end of the cam that holds the timing gears on..all auto parts stores in town said they cant order one in..anyone know the dimensions of the bolt or a place i can get one?

me and my friends were replacing a oil pan gasket on my 87 conquest but we forgot where the hose on the turbo side of the oil pan hookes up to.. so if anybody could tell me that would be really nice

i have a 1987 conquest tsi and i just put a new head gasket in...i need to re time it and i was wondering if i could get some steps...i already have the #1 at tdc and i need to know where the cam should be at

i am replacing the head gasket in my g54b and i need to know the torque specs and what is the torque pattern?

ok well i have the head off and the gasket looks fine....no good. there is oil on my fire wall soo does this mean a cracked block? also oil and antifreeze in the cylindars

i already have the intake and exaughst manifolds off and im able to pull both of them off of the studs so that should clear. i was just wondering if i had to take the timing chain cover off to adjust the timing gear and im pretty sure you do i just wanted to make sure that there wasnt an eaiser way. another problem is that my engine was not at TDC when i did this how big of a proble is this?

i need to change the head gasket in my 87 conquest i was wondering what i all need to take off...got it off but maybe its a cracked block...read my last post

ok well i guess my friends have talked me into not selling it sorry for posting and backing out

yea i took it to a guy who used to have a conquest and he changed it for me and ajusted it but he cant figure out why it runs so rich

THE GOOD: polar white paint single 14g turbo with hard piping intercooler blow off valve turbo back exaughst greddy turbo timer / boost controller new tps sensor seats and rest of int are in excellent shape the heater works amazing aftermarket rims ( im selling the car with the aftermarket rims and the stock ones) roughly 250hp new/used 5spd tranny new clutch new kenwood cd player electric windows and mirrors rear defrost and rear wiper python injectors THE BAD: passenger side fender has dent and so does hood driver side corner of widow cracked but not in driving visiabilty may need brake booster but not sure yet im going to get it looked at idles at 2.5k idk why i think the aftermarket injecters have something to do with it needs headgasket but ill probably put a new one in http://i129.photobucket.com/albums/p215/dylan_v/conquest005.jpg im asking at least 1500 for this car i just need to finish paying off my loan

its a mix with blue and white i can smell the oil but ill try that trick with the rag when i get out of school.

so i drive a 87 conquest and just recently i started noticing a little smoke out of the exaughst but its getting cold here in iowa so i dint think much of it. but today it was really bad when i would drive i would look back and see smoke and when i would stop a big cloud of smoke would pass me. and you can smell the burning oil. what do you guys think this could be. i wana say head gasket...i also can smell gas becasue of how rich it is running (if that helps any)

ok so i finaly get my quest back from the shop after he gave up working on it...me and my friends were looking at it and were puzzled why it wouldnt start.. so one of them recomends push starting it and at first i said no cause i really didnt think it would do anything...later on they convinced me to do it so we did and what do you know the thing started right off but it still wont idle...any ideas..the car turns over but just wont fire. ill add that the car does have a msd blaster 2 coil in it (i dont know if that helps at all) you think i should check the starter to see if its drawing power from the msd? or maybe faulty fuel pump cause i can hear it humming pretty good when it runs

i wish i could drive it my pic didnt upload

my camaro and van