livesTSI Posted September 15, 2009 Report Share Posted September 15, 2009 ive got two questions but i dont want to hog up the VM section. haha the piece of rubber hose at the top of my gas tank filler neck is leaking. is that piece anything special? whats the common replacement? and ive got a Greddy turbo timer. whoever tried to wire this thing in last was retarded, and it turns on and off with my blinkers. lol anyone got a good wiring diagram, or instruction? Link to comment Share on other sites More sharing options...
Edde Posted September 20, 2009 Report Share Posted September 20, 2009 I'm sure there is or was a mitsu part but it's just hose. No idea specifically what size though. Sell the turbo timer Link to comment Share on other sites More sharing options...
JAinsworth Posted September 20, 2009 Report Share Posted September 20, 2009 Part number for the filler hose is MB181707. The ID is almost 1 7/8 inches. I have one here if you don't want to order from Mitsu.Jimmy http://www.mitsubishiparts.net/cart/?pn=mb181707 Link to comment Share on other sites More sharing options...
jettajody Posted September 20, 2009 Report Share Posted September 20, 2009 Part number for the filler hose is MB181707. The ID is almost 1 7/8 inches. I have one here if you don't want to order from Mitsu.Jimmy http://www.mitsubishiparts.net/cart/?pn=mb181707You can also go to NAPA Autoparts, take the MB# up there and they can cross reference it for you. I did with mine and the hose was 19.99 a 1ft. They will only sell you the 1ft or more, no less. There is another 3/8 hose I believe as well so replace it while you are at it. This job is very easy and pain free. Link to comment Share on other sites More sharing options...
Recommended Posts