87whiteconquestblack Posted April 16, 2009 Report Share Posted April 16, 2009 does anyone know a safe way to get thoose stickers off the bottom of my rear fender they are cracked and look nasty! Link to comment Share on other sites More sharing options...
macrophage Posted April 16, 2009 Report Share Posted April 16, 2009 I think the best way to do it is to contact a auto paint supplier and ask him what chemical would be best to strip off or weaken that material without damaging the paint. IF you are not worried about paint then you could just scrap it off with a razor blade. Link to comment Share on other sites More sharing options...
007FUSE Posted April 16, 2009 Report Share Posted April 16, 2009 does anyone know a safe way to get thoose stickers off the bottom of my rear fender they are cracked and look nasty! HEY ,I USED A HEAT GUN AND PLASTIC RAZORS BLADES AND SOME 3M ADHESIVE REMOVER ,TOOK SOME TIME BUT SAVED MY ORIGINAL PAINT ....GOOD LUCK Link to comment Share on other sites More sharing options...
BC_99 Posted April 16, 2009 Report Share Posted April 16, 2009 HEY ,I USED A HEAT GUN AND PLASTIC RAZORS BLADES AND SOME 3M ADHESIVE REMOVER ,TOOK SOME TIME BUT SAVED MY ORIGINAL PAINT ....GOOD LUCK Try that or there is a product we use at work call Acrysol. Comes in a green can or spray can, works great, doesnt hurt paint or lexan. BC_99 Link to comment Share on other sites More sharing options...
chiplee Posted April 16, 2009 Report Share Posted April 16, 2009 HEY ,I USED A HEAT GUN AND PLASTIC RAZORS BLADES AND SOME 3M ADHESIVE REMOVER ,TOOK SOME TIME BUT SAVED MY ORIGINAL PAINT ....GOOD LUCK That's very similar to what I did. Lots of work but it comes off. Link to comment Share on other sites More sharing options...
grazel3793 Posted April 16, 2009 Report Share Posted April 16, 2009 3m adhesive remover is what i used... Link to comment Share on other sites More sharing options...
slydogg Posted April 16, 2009 Report Share Posted April 16, 2009 bumper sticker remover, advance auto. Link to comment Share on other sites More sharing options...
macrophage Posted April 17, 2009 Report Share Posted April 17, 2009 Hey i like the cracked "Rennisance/Mosaic"---Fresco style look lol Link to comment Share on other sites More sharing options...
jolyrgr Posted April 18, 2009 Report Share Posted April 18, 2009 I have removed them with a heated pressure washer with great success. Only left a few traces of adheasive residue that came off fairly easily. Link to comment Share on other sites More sharing options...
vettekiller593 Posted April 19, 2009 Report Share Posted April 19, 2009 (edited) get the rubber pinstripe revover wheel. Looks like an eraser thats what i just used. Edited April 19, 2009 by vettekiller593 Link to comment Share on other sites More sharing options...
Recommended Posts