modifyd Posted March 16, 2009 Report Share Posted March 16, 2009 (edited) For sale or trade: Ported/Stress-Relieved/Planed Flat Exhaust manifold ($170 shipped) *DM full 3" mandrel-bent exhaust (B/N except for DP and no muffler included); The DP on the *DM has the O2 top bung welded up and a bung for a wideband installed near the lower bend ($310 shipped) 12A in good condition, ported exhaust housing to match manifold ($50 shipped) Act Full Face Street Clutch Disc/ Heavy Duty PP/TOB (Probably Stage 1 or 2) with RaceTEP lightened flywheel~500miles ($300 shipped) 1G MAS w/pigtail and K&N filter ($65 Shipped) '89 Engine and 5-speed trans. ~150k on engine/trans (40k on head) The car has always been at stock boost since I've had it. The valve cover is off and the front pulleys are off as well. I was starting the balance-shaft eliminating and timing chain/gaskets and didn't finish. The TB gaskets are new as well as injector rings. The EGR is gone and a custom machined plate covers the hole. You will get basically everything needed to make this run for a swap (including the ECU minus the wiring harness). I will get that after I install the harness from the 1JZ (I just need it to trace). The engine also has a brand new starter and vacuum assist on the distributor. ($450 picked up) I'm looking for $1000 for everything or prices separate as shown. Possible partial OR full trades: Undented hood (no 83s please), non-spoiler hatch with seals (with no wiper and no defroster if they were made), driver's rocker panel, SHP wheels, louvers, power mirrors, column (not sure if they come apart but I just need the top where the steering nut threads on - the previous owner stripped it) Engine/trans/parts located near Pittsburgh, PA Can snap more pictures on a weekend if interested. Edited March 26, 2009 by modifyd Quote Link to comment Share on other sites More sharing options...
Starionblk Posted March 16, 2009 Report Share Posted March 16, 2009 got a front air dam? Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 16, 2009 Author Report Share Posted March 16, 2009 Not one FS but I wouldn't mind having an uncracked one. Quote Link to comment Share on other sites More sharing options...
movin on Posted March 16, 2009 Report Share Posted March 16, 2009 Please let me know if you decide to sell that manifold . Quote Link to comment Share on other sites More sharing options...
ColdScrip Posted March 17, 2009 Report Share Posted March 17, 2009 Would you be willing to sell the exhaust separate? Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 17, 2009 Author Report Share Posted March 17, 2009 I want to sell it as a package as I won't need what's left over. As always, if I get interest in each piece I can let it go separately. I prefer to sell it whole as a running engine. Quote Link to comment Share on other sites More sharing options...
creakyjoints Posted March 17, 2009 Report Share Posted March 17, 2009 Willing to ship? Quote Link to comment Share on other sites More sharing options...
soulja620 Posted March 18, 2009 Report Share Posted March 18, 2009 if you separate parts dibs on 1gmas and pigtail Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 18, 2009 Author Report Share Posted March 18, 2009 Yes, I will ship it to the lower 48. Not sure if you want to pay the shipping costs, though; it might be pretty high. Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 18, 2009 Author Report Share Posted March 18, 2009 Oh yeah, the clutch set has less than 500 miles on it! I'm just ready for the 1J. Quote Link to comment Share on other sites More sharing options...
slow8988 Posted March 18, 2009 Report Share Posted March 18, 2009 would you trade clutch set for a good hood that needs paint - red - and a rear hatch. I live in hickory Nc . if you are interested id be willing to meet halfway Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 23, 2009 Author Report Share Posted March 23, 2009 picture 1 Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 23, 2009 Author Report Share Posted March 23, 2009 picture 2 Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 23, 2009 Author Report Share Posted March 23, 2009 (edited) I can shoot more pictures next weekend of exhaust system if needed. It's just the *DM full 3". I have the valve cover, etc. See 1st post. Also has a B/N starter on it that I forgot about. The pulleys are back on as well as the timing cover. It has a brand new vacuum assist on the dizzy Edited March 23, 2009 by modifyd Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 24, 2009 Author Report Share Posted March 24, 2009 bump to the top - now splitting the setup Quote Link to comment Share on other sites More sharing options...
Killaphil Posted March 25, 2009 Report Share Posted March 25, 2009 what stage is the clutch and is the pp an extreme or hd Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 25, 2009 Author Report Share Posted March 25, 2009 full-face organic and H-D PP. Probably 30% increase in clamping. I think that's either Stage 1 or 2. Quote Link to comment Share on other sites More sharing options...
12secslip Posted March 25, 2009 Report Share Posted March 25, 2009 i have the cowl section from a 87 w hinges Id trade straight up for the clutch setup . Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 26, 2009 Author Report Share Posted March 26, 2009 I think I'm just going to get the body shop to weld it up. The cowl is only dented a little and there are 1.5" gouges where the hinges came up, but I think it can be repaired without sectioning it. Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 29, 2009 Author Report Share Posted March 29, 2009 Up to the top... Quote Link to comment Share on other sites More sharing options...
modifyd Posted March 30, 2009 Author Report Share Posted March 30, 2009 Bump for offers. Quote Link to comment Share on other sites More sharing options...
modifyd Posted April 1, 2009 Author Report Share Posted April 1, 2009 1G MAS Sold and engine/trans/etc up on eBay Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.