wi6s Posted February 23, 2009 Report Share Posted February 23, 2009 (edited) I have many parts for sale. All parts are new unless noted. Also prices as marked or best offer. Some of the larger things might be a little more with shipping but just let me know what you are interested in. 1g stock cylinder head $150 (used) 4g63 Brian Crower Stage 2 cams $350 1g eprom ecu $100 (used) SOLD 2g eprom ecu $175 (used) 1g engine harness $80 (used) Greddy type-RS blowoff valve $175 SOLD Tial 38mm wastegate silver $190 1g trottle body best offer (used) SOLD 3.5 gm MAF $70 (used) FIC 950cc injectors $285 SOLD SBR cast mitsu turbo manifold with 38mm flange $140 DNP mitsu turbo manifold $550 JMF mitsu intake set up for RWD $300 (slightly used) SOLD intercooler 18x12x3 best offer SOLD intercooler 24x10.5x3.5 best offer PTE 6152E turbo with A/R .63 $600 2g 3 gauge a-pillar pod black $50 2g turbo flex-a-lite fans blue $300 (few minor cracks that wont affect performance) Schroth 4pt blue harnesses $275 (set of driver and passenger) Stewart Warner 114254 oil pressure gauge $60 SOLD Stewart Warner 114272 water temp gauge $50 Stewart Warner 114542 vac/boost gauge $50 SOLD quest 3 gauge pod $50 quest walbro 255 fuel pump with install kit $100 SOLD quest *DM 3" exhaust $325SOLD Fidanza flywheel for quest and the T-56 $200 SOLD T-56 trans without bellhousing $800 also gauging interest in a 88 conquest freshly painted white. It is a widebody and has the 8" and 9" wheels. I was planning on doing the 4g64 with the T-56 swap but was recently laid off and now need to part with my project. Edited April 13, 2009 by wi6s Quote Link to comment Share on other sites More sharing options...
eurotiva Posted February 23, 2009 Report Share Posted February 23, 2009 How much for the whole project? Or package? Quote Link to comment Share on other sites More sharing options...
wi6s Posted February 23, 2009 Author Report Share Posted February 23, 2009 How much for the whole project? Or package? I would like to get around $7500-8000 as I have just around 4000 into just the paint alone plus over 8000 in parts. I do have a 4g64 wide block with weisco pistons and eagle rods but they are at a friends house so I have to get those. I was just listing everything I had at the moment. Feel free to make me an offer. The car was pretty much rust free, I had to replace a fender but everything else seems to be in pretty good shape. The interior is black leather with some minor tears at the seams. If you want to know anything else feel free to ask. Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 23, 2009 Report Share Posted February 23, 2009 (edited) Can I get pictures of the JMF intake? Very interested. Quick shipping quote to 35758? Also is this a Street, Race, or Drag? Edited February 24, 2009 by Minagera Quote Link to comment Share on other sites More sharing options...
newquest86 Posted February 23, 2009 Report Share Posted February 23, 2009 pm'd about exhaust Quote Link to comment Share on other sites More sharing options...
uawrestler Posted February 24, 2009 Report Share Posted February 24, 2009 Is this the stainless exhaust? Can you post pics? What would shipping be on exhaust and BOV to 85712? Quote Link to comment Share on other sites More sharing options...
wi6s Posted February 24, 2009 Author Report Share Posted February 24, 2009 Is this the stainless exhaust? Can you post pics? What would shipping be on exhaust and BOV to 85712? I will get pics sent out either later tonight or first thing in the morning. I will also check on the shipping. Thanks for everyones patience. Quote Link to comment Share on other sites More sharing options...
Strickdawg Posted February 24, 2009 Report Share Posted February 24, 2009 interested in fuel pump. is it new or used and can i get some pics of it. is it a direct bolt on? thank you Quote Link to comment Share on other sites More sharing options...
wi6s Posted February 24, 2009 Author Report Share Posted February 24, 2009 (edited) Alright well I got some pics but am not sure how to upload them so I made a gallery in my profile. As far as the JMF goes, I believe it might be a race version but am not 100% sure. The shipping would be $14. I need to get to the exhaust as it is in the car up on the lift so I will do that tomorrow. It is the *DM 3" exhaust that Kelly sells so if that helps. I believe if you do a search in the group buy section you can find some pics of the setup. I am waiting on a reply from newquest86 about the exhaust and if he is not interested I will get a price for the shipping of the exhaust and BOV for you uawrestler. The fuel pump is brand new and is an inline setup and should be direct fit. Its the Walbro 255 that has been in group buys a couple of times. If there is anything I left out feel free to ask. Edited February 24, 2009 by wi6s Quote Link to comment Share on other sites More sharing options...
rocheman1 Posted February 24, 2009 Report Share Posted February 24, 2009 interested in fuel pump. is it new or used and can i get some pics of it. is it a direct bolt on? thank you Next in line, i have the same questions. Quote Link to comment Share on other sites More sharing options...
Strickdawg Posted February 24, 2009 Report Share Posted February 24, 2009 how do i pay for fuel pump Quote Link to comment Share on other sites More sharing options...
snoopylover Posted February 24, 2009 Report Share Posted February 24, 2009 do you have any stock DSM blowoff valves w/piping? Quote Link to comment Share on other sites More sharing options...
wi6s Posted February 24, 2009 Author Report Share Posted February 24, 2009 do you have any stock DSM blowoff valves w/piping? No stock blowoff valves with piping. Sorry Quote Link to comment Share on other sites More sharing options...
quikconq Posted February 24, 2009 Report Share Posted February 24, 2009 possibly interested in the 4g64 and pistons and rods your a little drive from here,,,wats your zip for mapquest how much? Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 24, 2009 Report Share Posted February 24, 2009 Hey bud, if you can get me some pictures of the inside of the intake and the intake itself, I would probably be down for it. Quote Link to comment Share on other sites More sharing options...
wi6s Posted February 24, 2009 Author Report Share Posted February 24, 2009 I am at 55317 as far as the pics, I will take some and post them in my album in my profile. Anything else just shoot me a message. Quote Link to comment Share on other sites More sharing options...
Strickdawg Posted February 24, 2009 Report Share Posted February 24, 2009 I see you said that you have a 3 gauge pod for the quest. is this a pillar pod? I was under the understanding that there was not a 3 gauge pillar pod to fir our cars(custom fit) i know there is one guy on here that custom fabricated a 3 gauge to fit his car and it looks awsome. let me know. thanks Quote Link to comment Share on other sites More sharing options...
wi6s Posted February 24, 2009 Author Report Share Posted February 24, 2009 The pod is not a pillar pod, its the one that goes where the vents are above the radio. As far as the price for the block, pistons, and rods, I would like to get 750. The rods and pistons alone are close to that and being that the block is the rare 6-bolt wideblock make it a pretty good deal in my mind. Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 24, 2009 Report Share Posted February 24, 2009 I will take the intake from you Bryan. Damn that thing is sexy. Quote Link to comment Share on other sites More sharing options...
bamf Posted February 25, 2009 Report Share Posted February 25, 2009 intercooler 24x10.5x3.5 best offer do you know what brand it is also what size pipe in and out? Quote Link to comment Share on other sites More sharing options...
wi6s Posted February 25, 2009 Author Report Share Posted February 25, 2009 (edited) intercooler 24x10.5x3.5 best offer do you know what brand it is also what size pipe in and out? Not sure on the brand. My brother had a local shop weld up the end tanks so he could fit it in his eclipse. He decided to try for more power and got a larger core. The in and out size is 3". As far as price, feel free to make an offer. Edited February 26, 2009 by wi6s Quote Link to comment Share on other sites More sharing options...
TurboDoorHandles Posted February 28, 2009 Report Share Posted February 28, 2009 do you have a uncut non turbo twin cam 4g63 1g wiring harness? Quote Link to comment Share on other sites More sharing options...
vr4x4 Posted March 2, 2009 Report Share Posted March 2, 2009 Pm sent Quote Link to comment Share on other sites More sharing options...
wi6s Posted March 2, 2009 Author Report Share Posted March 2, 2009 4x4- just sent you a pm. sorry to take so long turbodoorhandles- as far as the harnesses go, they both are uncut but are for a turbo 4g63 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.