quikconq Posted June 5, 2009 Author Report Share Posted June 5, 2009 Interested in the little plastic square piece thats about 2" long and 1" wide that clips into your dash right below the steering wheel, believe its on the right side of steering wheel. Covers a square hole. Need black colored one, but if don't have one I can paint it. Also do you have any good 88-89 non torn driver seats? Any hard pipes? Preferece aluminum? How about performance turbo's any 17-19c's Thanks, Wizard dont have the black trim peice near the steering wheel i do have good untorn, uncracked 88 seats and 89 seats,,you need the pin holes?????? yes i have a set of *DM chrome hard pipes with turbo xs bov,,with silicone couplers and clamps..450.00 plus shipping no turbos bryen Quote Link to comment Share on other sites More sharing options...
Kenny G Posted June 5, 2009 Report Share Posted June 5, 2009 need antenna that works. kennethgraham2@cox.net Quote Link to comment Share on other sites More sharing options...
quikconq Posted June 8, 2009 Author Report Share Posted June 8, 2009 need antenna that works. kennethgraham2@cox.net i do have a good antenna motors,,but no masts that are good Quote Link to comment Share on other sites More sharing options...
nitrocbr900 Posted June 9, 2009 Report Share Posted June 9, 2009 lmk wat your lookin for no 83 hoods or 2.6 cranks 1 cracked 87 airdam other wise i have 1 or 5 of everything couple rust free bodies also have a rear half of a car turned into a lawnchair,,,and yes the car was totaled in the front,,,,most of us have went over this,,,,so please no grief some parts in the photos i have already sold,,,and havent edited them yet in part cuz other parts in the pic radiators,,,windsheilds,dizzys,240 mm flywheels ,88-89 trannies , NEED BREAD FOR THE LATEST PURCHASE just ask thanx bryen How much for the driver's side tail light. I need one that is mint. thnx. Quote Link to comment Share on other sites More sharing options...
quikconq Posted June 11, 2009 Author Report Share Posted June 11, 2009 How much for the driver's side tail light. I need one that is mint. thnx. conquest or starion????????? Quote Link to comment Share on other sites More sharing options...
chadls76 Posted June 12, 2009 Report Share Posted June 12, 2009 i need an automatic transmission for my 1988 starion asap? Please PM me? lmk wat your lookin for no 83 hoods or 2.6 cranks 1 cracked 87 airdam other wise i have 1 or 5 of everything couple rust free bodies also have a rear half of a car turned into a lawnchair,,,and yes the car was totaled in the front,,,,most of us have went over this,,,,so please no grief some parts in the photos i have already sold,,,and havent edited them yet in part cuz other parts in the pic radiators,,,windsheilds,dizzys,240 mm flywheels ,88-89 trannies , NEED BREAD FOR THE LATEST PURCHASE just ask thanx bryen Quote Link to comment Share on other sites More sharing options...
quikconq Posted July 1, 2009 Author Report Share Posted July 1, 2009 i need an automatic transmission for my 1988 starion asap? Please PM me? no auto trannies,,,at this time Quote Link to comment Share on other sites More sharing options...
Strikeking10 Posted August 23, 2009 Report Share Posted August 23, 2009 do you have any good turbos? Quote Link to comment Share on other sites More sharing options...
quikconq Posted August 23, 2009 Author Report Share Posted August 23, 2009 no turbos sorry Quote Link to comment Share on other sites More sharing options...
sexygomer Posted August 23, 2009 Report Share Posted August 23, 2009 front spindles and the little triangular pieces of plastic by the a pillar on the doors please Quote Link to comment Share on other sites More sharing options...
quikconq Posted August 23, 2009 Author Report Share Posted August 23, 2009 front spindles and the little triangular pieces of plastic by the a pillar on the doors please front spindles???you mean the hub assembly???or the strut/spindle assembly either way yes i do have them pm me wat you need Quote Link to comment Share on other sites More sharing options...
88txquest Posted August 24, 2009 Report Share Posted August 24, 2009 do you still have the mesh wheels? If so how much to 76117? And do they have any center caps? Thanks Jon Quote Link to comment Share on other sites More sharing options...
RWDAddict Posted August 24, 2009 Report Share Posted August 24, 2009 water pump pulley, thermostat housing, and a good t-stat. How much shipped to 60051? Quote Link to comment Share on other sites More sharing options...
spadednfaded Posted August 24, 2009 Report Share Posted August 24, 2009 i need MAS, injectors and front air damn (prefferably black) for 88 esi-r shipped to 24522 do you take money order? Quote Link to comment Share on other sites More sharing options...
Mori Posted August 25, 2009 Report Share Posted August 25, 2009 Do you have any 4 lug wheels from a 84-85 Conquest? The ones with the four large "cowbell" vents. Thanks. Quote Link to comment Share on other sites More sharing options...
2manytoyz Posted August 26, 2009 Report Share Posted August 26, 2009 What do you want for that one good front shp wheel? need uncracked turbo manny p/s red door i can pickup im 2 hours away Quote Link to comment Share on other sites More sharing options...
sexygomer Posted August 27, 2009 Report Share Posted August 27, 2009 front spindles???you mean the hub assembly???or the strut/spindle assembly either way yes i do have them pm me wat you need just the hub, dont need the whole thing, just where the bearings are, also need dvr door handle trim, and the window trim for an 83 with the tweeters if possible thanks Quote Link to comment Share on other sites More sharing options...
sexygomer Posted August 27, 2009 Report Share Posted August 27, 2009 front spindles???you mean the hub assembly???or the strut/spindle assembly either way yes i do have them pm me wat you need just the hub, dont need the whole thing, just where the bearings are, also need dvr door handle trim, and the window trim for an 83 with the tweeters if possible thanks Quote Link to comment Share on other sites More sharing options...
quikconq Posted August 29, 2009 Author Report Share Posted August 29, 2009 just the hub, dont need the whole thing, just where the bearings are, also need dvr door handle trim, and the window trim for an 83 with the tweeters if possible thanks dont have any 83 stuff now the hub assembly stuff i have are from 86-89 widebodies,,,just so you know still interested???? pm me your zip code and ill get you a shipping quote Quote Link to comment Share on other sites More sharing options...
tsienvy Posted August 29, 2009 Report Share Posted August 29, 2009 Hey, Bryen, PM'd you a while ago (month or two) about a stock muffler assy. Any left??? Also looking for the upper console were radio is located, black if available. Thanks, Jeff tsienvy Quote Link to comment Share on other sites More sharing options...
quikconq Posted August 29, 2009 Author Report Share Posted August 29, 2009 Hey, Bryen, PM'd you a while ago (month or two) about a stock muffler assy. Any left??? Also looking for the upper console were radio is located, black if available. Thanks, Jeff tsienvy hey jeff i think i used the one muffler i mentioned i had,,at that time but have since received 2 parts cars since did i quote you a price,for the muff ????? and i do have a front upper console ,,do you need the radio bezel???? noncracked radio bezels i sale for 30bux noncracked front console peice 25 bux plus shipping as always bryen Quote Link to comment Share on other sites More sharing options...
tsienvy Posted September 1, 2009 Report Share Posted September 1, 2009 Bryen, No quote on muffler assy, of course I'm looking for a good solid piece. May be interested in radio "bezel" only. How much to ship to 15063. If possible, figure muffler assy separate, to same zip. Thanks, Jeff tsienvy PM me if you want. hey jeff i think i used the one muffler i mentioned i had,,at that time but have since received 2 parts cars since did i quote you a price,for the muff ????? and i do have a front upper console ,,do you need the radio bezel???? noncracked radio bezels i sale for 30bux noncracked front console peice 25 bux plus shipping as always bryen Quote Link to comment Share on other sites More sharing options...
nickireson Posted September 9, 2009 Report Share Posted September 9, 2009 Got an 89 tsi accordian hose? Good turbo dizzy with vac advance? Or just vac advance? Thnx Quote Link to comment Share on other sites More sharing options...
turbojew Posted September 10, 2009 Report Share Posted September 10, 2009 I need an Air Intake Temperature sensor for an 86 intercooled wide body can u help? Quote Link to comment Share on other sites More sharing options...
sexygomer Posted September 11, 2009 Report Share Posted September 11, 2009 just looking for the door bezels now, out of an '83 with the tweeters, and driver inside door handle trim http://i45.photobucket.com/albums/f51/jsilva55/100_0448.jpg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.