starquestfor12s Posted September 21, 2006 Report Share Posted September 21, 2006 ok i just got my car togather and the first couple of dayz were awsome it pulled realy good at 5 to 10 psi for like two days i blew a pipe off at 10 psi and now its realy slow here are the mods hurricaine mpi kitt3t4 70 trimwalbor 255fpr rising ratemsd 6alact 6 pucktop end performance non jet valve head278 cam 1mm oversized valvesstock bottom endi want to eventually run like 15 to 20 but not till this problem is fixedmsd blaster 2 coiland much more supporting mods what should i run and does anyone have any ideas for me thanx Dan p.s here are some old picshttp://s87.photobucket.com/albums/k140/1fastconquest/ Link to comment Share on other sites More sharing options...
Kr0nus Posted September 21, 2006 Report Share Posted September 21, 2006 Idea's for what? The reason why your pipe is comming off? It's probably because you either don't have a lip on your hard pipes, or your couplers aren't tight enough. Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted September 21, 2006 Report Share Posted September 21, 2006 Yeah, i'm a bit confused aswell.. T-bolt clamps are your friend. :wink: Link to comment Share on other sites More sharing options...
button Posted September 21, 2006 Report Share Posted September 21, 2006 the end of your IC pipes should look like this:http://www.rgvimports.com/pics/javi/beadroller/1.JPGif not, they need beeded. more info on beading pipe:http://www.roadraceengineering.com/eclipse.../icpipebead.htm or did you put the pipe back on, and now its slow all of a sudden? Link to comment Share on other sites More sharing options...
Brown Posted September 21, 2006 Report Share Posted September 21, 2006 Sound like you should pressure test your intercooler system integrity. Link to comment Share on other sites More sharing options...
HotrodTSi Posted September 21, 2006 Report Share Posted September 21, 2006 Check all your IC connections...you may have another one that needs attention. Link to comment Share on other sites More sharing options...
starquestfor12s Posted September 22, 2006 Author Report Share Posted September 22, 2006 the end of your IC pipes should look like this:http://www.rgvimports.com/pics/javi/beadroller/1.JPGif not, they need beeded. more info on beading pipe:http://www.roadraceengineering.com/eclipse.../icpipebead.htm or did you put the pipe back on, and now its slow all of a sudden?yes im running 10 psi right now and its not even pulling like it did at 6 psi before i blew of the pipe. I just dont get it becuse the car pulled realy good before this happend inless there are some vacume leaks i cant find our boost leaks, im out off ideas. you live right near me u should come check it out sometime also all of my pipes do have a lip on them Thanx Dan Link to comment Share on other sites More sharing options...
TopDawg_43 Posted September 22, 2006 Report Share Posted September 22, 2006 Sounds like you need some more tuning. Link to comment Share on other sites More sharing options...
Recommended Posts