substock Posted March 7, 2004 Report Share Posted March 7, 2004 whats the best way of running new speaker wire to the doors? all that left on my speaker install is to take the doors off and replace those speakers along with the wire for them. Jason Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted March 7, 2004 Report Share Posted March 7, 2004 I'd run it the way the factory did...Through the rubber seals on the side of the door, by the hinges sort-of... There's a little tube "channel" that goes from the inside of the car, under the dash to where it enters the doors.. Pull out the old wire, and run the new wire as best as you can... You'll see it very easily when the door is open... Anything else? Link to comment Share on other sites More sharing options...
Recommended Posts