Contsi Posted September 21, 2023 Report Share Posted September 21, 2023 Having rubbing type noise when coming to a stop; not continuous but per each revolution and doesn't appear to be every time. Appears to be coming from right front wheel. Does not appear to be related to the brakes. I got a set of inner, outer bearing an seal and thinking of replacing. Manual shows special tool for pressing the race. Is this something I can get? and how tricky is this project Had a bit of play to that wheel a couple years ago, I tighten the hub nut a bit and the play went away. Thanks Link to comment Share on other sites More sharing options...
TexasQuest Posted September 24, 2023 Report Share Posted September 24, 2023 No need for a special tool. I use a long punch and hammer to drive them out. Be careful not to gouge the metal inside the hub. I use a seal and race driver set to install the new races and grease seal. Link to comment Share on other sites More sharing options...
Recommended Posts