Brian McGuire Posted June 16, 2023 Report Share Posted June 16, 2023 Got my maf translator wired up runs but not running right, wires from car air cleaner are two green and with red strip, two black with white strip, white with black strip and red and translator wires are pink, green, black, gray and brown what wires go with each other. Could someone help so I can see if wired right and what wire is left out. Quote Link to comment Share on other sites More sharing options...
860QuestTuner Posted June 17, 2023 Report Share Posted June 17, 2023 87 to 89 Maf wires: Plug position-Color-Function 1-White /black-airflow output 2-Large red-+12 volts 3-Green/red-baro sensor 5v power 4'Black/white--Ground 5-Black/white-Baro pressure out 6-Green/red-Intake air temp Translator to harness Pink goes to 2 for power Black goes to 4 for ground Green to 1 for airflow Gray to 5 for baro fixed at 3.9v Brown to 6 for fixed temp of 80 White not used, rpm sig does not work. The 1st gen dsm tuning instructions are still available if you search. Quote Link to comment Share on other sites More sharing options...
Brian McGuire Posted June 19, 2023 Author Report Share Posted June 19, 2023 Thanks for information think I got everything running pretty good had some wire it up years ago was not sure about the two green and red stiped wires 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.