BLACK88SHP Posted August 27, 2015 Report Share Posted August 27, 2015 (edited) <SOLD!> AMC Marnal head (Spain casting) w/Monsta Banshee roller cam set-up... <SOLD!> I bought this from notfried earlier in the year and have realized that I will probably never need it. My car is in very near original condition and my engine was meticulously rebuilt less than 10K miles ago by K.D.M. It is not my daily driver and I do not race it, so I will probably have no need to rebuild the engine for a very long time. I have only opened the box from notfried to inspect it and then I sealed it back up. I am asking less than what I paid for it. The original details posted by notfried are below: "Spain casting Marnal head with 500 miles on it... It is gasket matched ported on the exhaust side, using a flow bench, has 1mm over-sized stainless steel valves, Schneider heavy-duty springs, and was made for a high-lift cam. The cam is a Tim C. Monsta Banshee Roller cam (INT Duration @.050: .207° Seat-To-Seat: 265°, EXH Duration @.050: .196° Seat-To-Seat: 262°, INT Lift: .480 w/1.6 ratio rockers;, EXH Lift:.459, Lobe Center Separation: 111.5°, Degree intake Lobe to 107°, Power Range: 2500-6500RPM), the rockers are 1:6 3000GT rollers, and the gear is a MK1 from Mookeeh. All the intake/exhaust hardware came from Dad, along with lifters and Fel-Pro 9116 head gasket set. This head was bought from the "Marnal GP OG", Richie_Rich, back in the day, sat in a box on a shelf most it's life, and got finally strapped to an engine that the machine shop installed the rings upside down in. Hence the 500 miles and the soot in the chambers. I included a pic of the soot because underneath it it is perfectly clean, and it falls off easily. I have over $1500 invested in this head/cam set-up. $900 shipped (continental US) Edited September 3, 2015 by BLACK88SHP Quote Link to comment Share on other sites More sharing options...
87redcat Posted August 27, 2015 Report Share Posted August 27, 2015 Great price for all that. GLWS Quote Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted August 27, 2015 Report Share Posted August 27, 2015 killa deal mang Quote Link to comment Share on other sites More sharing options...
BLACK88SHP Posted August 29, 2015 Author Report Share Posted August 29, 2015 Thank you for your patience answering PMs. Busy work week. No deal finalized yet. Quote Link to comment Share on other sites More sharing options...
BLACK88SHP Posted August 31, 2015 Author Report Share Posted August 31, 2015 (edited) Waiting to hear back from a couple of potential buyers. Edited September 1, 2015 by BLACK88SHP Quote Link to comment Share on other sites More sharing options...
BLACK88SHP Posted September 1, 2015 Author Report Share Posted September 1, 2015 bump Quote Link to comment Share on other sites More sharing options...
DSM-STARION Posted September 1, 2015 Report Share Posted September 1, 2015 PM'ed Thnxx Quote Link to comment Share on other sites More sharing options...
BLACK88SHP Posted September 3, 2015 Author Report Share Posted September 3, 2015 (edited) SOLD! On its way to Switzerland. Edited September 3, 2015 by BLACK88SHP Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.