notfried Posted April 3, 2015 Report Share Posted April 3, 2015 (edited) Hey all. I have a Spain casting Marnal head with 500 miles on it that I am no longer needing. It is gasket matched ported on the exhaust side, using a flow bench, has 1mm over-sized stainless steel valves, Schneider heavy-duty springs, and was made for a high-lift cam. The cam is a Tim C. Monsta Banshee Roller cam (INT Duration @.050: .207° Seat-To-Seat: 265°, EXH Duration @.050: .196° Seat-To-Seat: 262°, INT Lift: .480 w/1.6 ratio rockers;, EXH Lift:.459, Lobe Center Separation: 111.5°, Degree intake Lobe to 107°, Power Range: 2500-6500RPM), the rockers are 1:6 3000GT rollers, and the gear is a MK1 from Mookeeh. All the intake/exhaust hardware came from Dad, along with lifters and Fel-Pro 9116 head gasket set. This head was bought from the "Marnal GP OG", Richie_Rich, back in the day, sat in a box on a shelf most it's life, and got finally strapped to an engine that the machine shop installed the rings upside down in. Hence the 500 miles and the soot in the chambers. I included a pic of the soot because underneath it it is perfectly clean, and it falls off easily. I have over $1500 invested in this head/cam set-up and am looking to get $950 shipped and insured (continental US). Here's some pics. Thank you and have a blessed day. http://i85.photobucket.com/albums/k61/notfried/19126_946004952086033_1300947645577761121_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11127877_946004912086037_6125106262711539536_n.jpghttp://i85.photobucket.com/albums/k61/notfried/10420280_946004895419372_7337388523279718732_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081046_946004882086040_5515029591966322676_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081437_946004858752709_9131302519937521197_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11084270_946004835419378_1518888447213133192_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11133708_946004805419381_6383342337114360845_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081361_946004792086049_8695328717371600265_n.jpghttp://i85.photobucket.com/albums/k61/notfried/10502486_946004465419415_5358873570842221190_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11134147_946004538752741_4518085174317736082_n.jpghttp://i85.photobucket.com/albums/k61/notfried/18915_946004768752718_4311894291661751461_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11081498_946025185417343_692370248185311202_n.jpghttp://i85.photobucket.com/albums/k61/notfried/11082594_946025798750615_5697647407571953883_n.jpg Edited May 2, 2015 by notfried Quote Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted April 3, 2015 Report Share Posted April 3, 2015 Flatty want 1 Quote Link to comment Share on other sites More sharing options...
notfried Posted April 3, 2015 Author Report Share Posted April 3, 2015 The black one does need this, Harry. Is that my old '87 auto you picked up from Devin years ago? Quote Link to comment Share on other sites More sharing options...
randy Posted April 3, 2015 Report Share Posted April 3, 2015 possible interest in this will pm later. Quote Link to comment Share on other sites More sharing options...
Bills89quest Posted April 3, 2015 Report Share Posted April 3, 2015 nice. If I hadn't bought my amc marnal already Id be all over this, I'd be interested in the cam. mookeeh cam gear and roller rockers if you separated...just sayin.. Quote Link to comment Share on other sites More sharing options...
notfried Posted April 3, 2015 Author Report Share Posted April 3, 2015 (edited) I may split them up. I don't want to just yet, though. I'd rather have it all go to one spot, but ya never know. Edited April 3, 2015 by notfried Quote Link to comment Share on other sites More sharing options...
Bills89quest Posted April 3, 2015 Report Share Posted April 3, 2015 well if you do split them up, holler at me. How about that nice cowl hood I see on your profile pic? Is that a Burton hood? Quote Link to comment Share on other sites More sharing options...
notfried Posted April 3, 2015 Author Report Share Posted April 3, 2015 I will. And no, not Mark's hood. Like the head, it's from the first ever GP done by Gary. Quote Link to comment Share on other sites More sharing options...
Bills89quest Posted April 3, 2015 Report Share Posted April 3, 2015 nice. Well just let me know. My car is currently down in Rowlett getting finished. Quote Link to comment Share on other sites More sharing options...
notfried Posted April 3, 2015 Author Report Share Posted April 3, 2015 Yessir. Quote Link to comment Share on other sites More sharing options...
randy Posted April 4, 2015 Report Share Posted April 4, 2015 pm you. Quote Link to comment Share on other sites More sharing options...
notfried Posted April 4, 2015 Author Report Share Posted April 4, 2015 Replied Quote Link to comment Share on other sites More sharing options...
randy Posted April 4, 2015 Report Share Posted April 4, 2015 Back at you. Quote Link to comment Share on other sites More sharing options...
notfried Posted April 6, 2015 Author Report Share Posted April 6, 2015 ToTheTop, BatDude. Quote Link to comment Share on other sites More sharing options...
notfried Posted April 8, 2015 Author Report Share Posted April 8, 2015 Bump. May negotiate some. Quote Link to comment Share on other sites More sharing options...
notfried Posted April 14, 2015 Author Report Share Posted April 14, 2015 Deposit received, sale pending the balance. Quote Link to comment Share on other sites More sharing options...
notfried Posted May 2, 2015 Author Report Share Posted May 2, 2015 Sold. Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.