droachrr Posted May 22, 2014 Report Share Posted May 22, 2014 (edited) Hey,Ive been selling off my goodies and now its time to let go of the engine. I have been building this motor for a really long time and refused to cut corners so everything is solid. I built this motor for MPI and a T76 at 30psi aiming at 500hp. I drove the car about 250 miles with a T3T4 and stock intake and it made incredible solid power. Unfortunately, the framerails have rusted through and I just don't have the time to keep putting into this car. I spent more on just the head than what I am selling the motor for. I prefer not to ship but will consider it if necessary. Text me with questions 609-424-8701 Ariel Turbonetics T76 turbo $650 - was used for 2 hours during a dyno war and pulled from the car - like new60mm vband wastgate and bov - nib - $150 for both G54B Engine -$1200 - details below Wiseco forged 8:1 pistons bored 40 overclevite 77 bearingstotal seal ringsarp rod boltsarp main boltsarp head studsnon-jet valve head with extreme race port and polishport matched stock intake manifoldTEP 272 camstainless steel valves with 3 angle valve job and back cutlightened stock flywheelHD valve springs with titanium retainersmechanical lash adjustersBSE - balance shaft eliminatedTEP race prepped rodsNew throwout bearingNew water pumpNew timing chain and guidesgm 110amp alternatorACT 6 puck unsprung clutch and CM extreme pressure plate I also have tons of stuff that I have collected over the years that will be included in the sale. Like I said, I HAVE to get rid of it all. Text if you need pics or have questions 609-424-8701 - Ariel Edited September 26, 2014 by droachrr Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted May 22, 2014 Report Share Posted May 22, 2014 Pics? Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 22, 2014 Author Report Share Posted May 22, 2014 http://s440.photobucket.com/user/g54beast/media/10_01_220.jpg.html?sort=3&o=47 http://s440.photobucket.com/user/g54beast/media/Picture041.jpg.html?sort=3&o=25 http://s440.photobucket.com/user/g54beast/media/10_01_32.jpg.html?sort=3&o=53 http://s440.photobucket.com/user/g54beast/media/10_01_35.jpg.html?sort=3&o=56 http://s440.photobucket.com/user/g54beast/media/10_01_36.jpg.html?sort=3&o=57 http://s440.photobucket.com/user/g54beast/media/10_01_31.jpg.html?sort=3&o=52 Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 22, 2014 Author Report Share Posted May 22, 2014 I can text pictures of the motor from a couple of months ago. Text me at 609-424-8701 and request pics Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted May 22, 2014 Report Share Posted May 22, 2014 What all is needed to finish the car and get it running and driving? Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 22, 2014 Author Report Share Posted May 22, 2014 Engine harness needs to be run, and megasquirt needs to be installed. It's going to need brakes and rotors it's been sitting for a while. You would also have to work out intercooler piping and a turbo. The only purchases that you would have to make are for the turbo, piping and rotors. Everything else is pretty much there. I am willing to throw in my Turbonetics T76 turbo for $500. Hood will need some paint. The paint that is on it is cracking and flaking off. Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 22, 2014 Author Report Share Posted May 22, 2014 I will also include the original head with a jet valve elimination kit and stock intake manifold if you want to return it to stock instead of the mpi. Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted May 22, 2014 Report Share Posted May 22, 2014 Darn its too much work for me right Noe but that's a good deal you have it priced at if I know anyone looking I'll send them your way I'm just trying to finish my mpi build also lol Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 22, 2014 Author Report Share Posted May 22, 2014 Thanks. Good luck with your mpi. Pass it on. This is a great deal and won't last too long. Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted May 22, 2014 Report Share Posted May 22, 2014 Trust me lol its definitely a good deal Quote Link to comment Share on other sites More sharing options...
j.quest Posted May 23, 2014 Report Share Posted May 23, 2014 I saw the car. its a great deal and Ariel is a cool guy. Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 23, 2014 Author Report Share Posted May 23, 2014 Bump^^^^ Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 27, 2014 Author Report Share Posted May 27, 2014 ^^^bump^^^ Quote Link to comment Share on other sites More sharing options...
droachrr Posted May 27, 2014 Author Report Share Posted May 27, 2014 I may be willing to trade for the right sport bike. Quote Link to comment Share on other sites More sharing options...
droachrr Posted August 28, 2014 Author Report Share Posted August 28, 2014 (edited) So I've decided to part this out. As of today everything is still available and is listed in the post above. I will do my best to reply promtly to any questions. More parts will be listed as I work through all of my stuff. Feel free to ask if youdont see what you are looking for. links to pictures are in post above I will try to post more pics shortly. The engine is being sold assembled and has zero miles on the build - $1200 -sale pendingWiseco forged 8:1 pistonsclevite 77 bearingstotal seal ringsBsearp rod boltsarp main boltsarp head studsnon-jet valve head with extreme race port and polishTEP 272 camstainless steel valves with titanium retainersHD valve springsmechanical lash adjustersgm 110amp alternatorACT 6 puck unsprung clutch and CM pressure platenew throwout bearingbrand new water pump ------------------------------------------------------------------------------------------------------------------------------------------------------parts for sale.Turbonetics T76 jb turbo- was run for 2 hrs for tuning session - $700 or bomodded South Florida Performance header - $200 sold50psi 60mm wastegate and matching bov - nib - $1503" catless turbo back straight pipe (no muffler) - $200brand new in box clutch master cyl with new in box steel braided clutch line - $75high volume low profile electric fan (must be modded to work) - $25 Mookee camber plates with pillowball- never installed - $125 megasquirt 2.2 stand alone assembled, relay box and wiring harness - never installed - sold14point7 JAW wideband controller - never assembled -$40EDIS 4 wheel, sensor and module - $40 soldmodded magna tr manifold.- only one like it - $200 soldford 75mm throttlebody - $254 delphi 72lb injectors - never installed - $150 soldhuge aftermarket fmic - $100decent stock intercooler - $30Autopower "street" roll bar with padding - $200 Edited September 6, 2014 by droachrr Quote Link to comment Share on other sites More sharing options...
randy Posted August 28, 2014 Report Share Posted August 28, 2014 What's the dimensions on the aftermarket fmic? Quote Link to comment Share on other sites More sharing options...
87quest-TSI Posted August 28, 2014 Report Share Posted August 28, 2014 pm sent Quote Link to comment Share on other sites More sharing options...
droachrr Posted August 28, 2014 Author Report Share Posted August 28, 2014 Fmic is 31"x 12" X 3". That measurement is from end to end. Randy, PM me your cell and I'll send pics. Having a hard time uploading from my phone. Quote Link to comment Share on other sites More sharing options...
'87quest Posted August 28, 2014 Report Share Posted August 28, 2014 pm'd Quote Link to comment Share on other sites More sharing options...
elkuko87 Posted August 29, 2014 Report Share Posted August 29, 2014 PM SENT Quote Link to comment Share on other sites More sharing options...
Killaphil Posted August 30, 2014 Report Share Posted August 30, 2014 How much for the roll bar shipped to 75002 Quote Link to comment Share on other sites More sharing options...
Guest 87redstar Posted August 31, 2014 Report Share Posted August 31, 2014 What rods does the fully built motor have? Quote Link to comment Share on other sites More sharing options...
droachrr Posted August 31, 2014 Author Report Share Posted August 31, 2014 Top End Performance race prepped stock rods. Quote Link to comment Share on other sites More sharing options...
droachrr Posted September 3, 2014 Author Report Share Posted September 3, 2014 ^^^bump^^^ Quote Link to comment Share on other sites More sharing options...
droachrr Posted September 22, 2014 Author Report Share Posted September 22, 2014 ^^^Bump^^^ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.