danmanTSI Posted January 11, 2013 Report Share Posted January 11, 2013 So I finnally bought some spacers to bring my front wheels out like the rears. My problem however, is that the stock 5 lug hubs utilize c-clips to secure the studs. I end up with a gap between the rotor and spacer. How do you remedy this? Link to comment Share on other sites More sharing options...
RF600 Posted January 12, 2013 Report Share Posted January 12, 2013 I used a retaining compound to hold the studs on. It sounds like you should ditch the c clips. Link to comment Share on other sites More sharing options...
Coke Posted January 13, 2013 Report Share Posted January 13, 2013 The C-clips are NOT there to secure the studs. The studs are 'pressed' into the hub from behind. The C-clips are there to hold the rotor in place during assembly. They are absolutely not needed. You can safely remove them. Link to comment Share on other sites More sharing options...
Recommended Posts