conquest707 Posted August 22, 2012 Report Share Posted August 22, 2012 http://projectzerog.com/rx7transmissions.shtml the bellhousing required for this swap and the hardest part to find. stronger transmission that is designed for higher revs. 200obo plus shipping Quote Link to comment Share on other sites More sharing options...
mr-starion Posted August 22, 2012 Report Share Posted August 22, 2012 Whats the shifter positioning on this setup? Internets slow and cant load the project zero g site Quote Link to comment Share on other sites More sharing options...
conquest707 Posted August 22, 2012 Author Report Share Posted August 22, 2012 depends on the transmission used, the rx7 trans (im fairly certain) sits about right for the SQ shifter hole. if you use a transmission from a truck it will be about six inches forward of stock Quote Link to comment Share on other sites More sharing options...
Lunacy Posted August 22, 2012 Report Share Posted August 22, 2012 depends on the transmission used, the rx7 trans (im fairly certain) sits about right for the SQ shifter hole. if you use a transmission from a truck it will be about six inches forward of stock Other way round The truck box sits in the standard spot, and the rx7 one is 6 inches further back Quote Link to comment Share on other sites More sharing options...
conquest707 Posted August 22, 2012 Author Report Share Posted August 22, 2012 Other way round The truck box sits in the standard spot, and the rx7 one is 6 inches further backawesome thanks! well i have a b2600 trans too haha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.