Jump to content

Brake system flush and rebuild


scubanut
 Share

Recommended Posts

DOT 5 is silicon based and does not absorb moisture, DOT 3 and 4 are hydrocarbon based and like to absorb moisture which ruins them and must be flushed periodically. They do not mix but having both in your brake system doesn't cause problems, I had to change out my master on a cross country trip and couldn't find any 5 which I had been running so I used 4 and pretty much forgot about it until I put my bbk on earlier this year. I noticed I had two distinct fluids draining from the calipers and lines, the stock brakes with the ABS removed had been working normally. Having said that I would not recommend mixing them. Starting from fresh like you're planning you can run either form, just make sure everything is bone dry before you fill.

 

Scott

Link to comment
Share on other sites

 Share

×
×
  • Create New...