black86tsi Posted December 20, 2011 Report Share Posted December 20, 2011 okay first off is the factory fuel line good enough for MPI if not what do I need. second i have had my car apart for 4 years and now im going back together with her but i need a little help there are three ports on my MPI one about 3/8" on the back by the firewall one about the same size in the middle of the intake on the head side and then a small port just below the throttle body what lines go to what ? thanks in advance Link to comment Share on other sites More sharing options...
FLATBROKE313 Posted December 20, 2011 Report Share Posted December 20, 2011 1 for brake booster and 2 for coolant that was mine,can ya take a pic Link to comment Share on other sites More sharing options...
black86tsi Posted December 21, 2011 Author Report Share Posted December 21, 2011 i will post up some pics tomorrow I'm at work now and its dark. i was thinking that the port at the back of the manifold would be for the brake booster but was unsure what the others went to P.S. this intake is art's old intake pretty big and has to be mounted to the head before I mount the head down. well you'll see what I mean in the pics tomorrow . any other help would be nice. anyone around Oklahoma that can tune this thing for me once I get it up and running would also be really awesome Link to comment Share on other sites More sharing options...
black86tsi Posted December 21, 2011 Author Report Share Posted December 21, 2011 okay i cant post pics but what i can tell you is there are two ports on the runner section by the head and then there are 3 ports on the plenum ( two about 3/8 and one about an1/8 or maybe a little bigger) Link to comment Share on other sites More sharing options...
ucw458 Posted December 21, 2011 Report Share Posted December 21, 2011 Best advice we can give you is to download the factory service manual. All the info you need is in there. www.starquestgarage.com Link to comment Share on other sites More sharing options...
Recommended Posts