Captain! Posted October 21, 2011 Report Share Posted October 21, 2011 (edited) SOLD. Car is located in Idaho Falls, Idaho. It needs a new turbo to run. I tried taking off the old turbo to get it rebuilt and ended up breaking a bunch of bolts off in the Exhaust housing. Car has: Forged pistons (Wiseco)Marnal NJV headStainless valvesMagna MPI72 lb injectorsMegasquirtDistributorless ignitionCam (old JG engine dynamics)Adjustable cam gearITS 60-1 turbo, needs a rebuild and is not currently on car, but you can have itStainless equal length headerTial Ext. WG2.5 inch stainless IC piping3 inch stainless exhaust 245/225 tires, not an SHP car This is one of those half-finished projects. The engine build was about 17k ago. Started and ran great prior to the turbo going. Engine bay/ wiring needs a cleanup. The body is very straight, with little to no rust. Interior is also in very good condition. With a little bit of work (mostly cosmetic) this car would be a beauty. Vehicle mileage is just under 138K. Body is very straight other than a couple of very small door dings. There is slight surface rust inside the lip of the rear fenders right behind the tires. Not very visible. Paint on the hood and bumpers is oxidized. Car has short shifter installed. WBO2 sensor/controller installed but needs a new display. Aftermarket boost gauge. Aftermarket water temp guage. Fans are on a switch. I have all the reciepts for most things so as long as checkers keeps carrying alternators and starters for this car you will get them for free, minus labor of course. Full disclosure: here's some stuff that you will probably want to work on: Relocate air cleaner (currently right on the turbo), power streering needs a new high pressure to low pressure hose to work (i currently have a hose on it to seal it up), front strut mounts, front ball joints, air dam, turbo, front tires (rears are good), the synchros are old and worn on the tranny but as long as you are not fast and furious shifting it is fine. SOLD. http://www.starquestclub.com/forum/uploads/1278209114/gallery_3824_699_242702.jpg http://www.starquestclub.com/forum/uploads/1278209114/gallery_3824_699_531006.jpg http://www.starquestclub.com/forum/uploads/1278209114/gallery_3824_699_390620.jpg http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/305931_10150299280955040_693255039_7825914_4507777_n.jpg http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/311806_10150299280625040_693255039_7825911_328404_n.jpg http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/308627_10150299280810040_693255039_7825913_903730_n.jpg Edited February 11, 2012 by Captain! Quote Link to comment Share on other sites More sharing options...
Captain! Posted November 1, 2011 Author Report Share Posted November 1, 2011 Bump Quote Link to comment Share on other sites More sharing options...
Minagera Posted November 1, 2011 Report Share Posted November 1, 2011 (edited) Freaking Steal of a DEAL! I would totally trade you my 89 for that sucker if you were a bit closer. Edited November 1, 2011 by Minagera Quote Link to comment Share on other sites More sharing options...
Captain! Posted November 2, 2011 Author Report Share Posted November 2, 2011 Thanks! I am currently trying to get the old turbo fixed and then it will go up a couple hundred. With work and my kid not much time gets spent with this car and it deserves better. Quote Link to comment Share on other sites More sharing options...
conquest9113 Posted November 2, 2011 Report Share Posted November 2, 2011 would u be willing to come off with just turbo and the mpi .or just the intake .i just rebuilt motor and iam looking for a nice multi port Quote Link to comment Share on other sites More sharing options...
Captain! Posted November 6, 2011 Author Report Share Posted November 6, 2011 would u be willing to come off with just turbo and the mpi .or just the intake .i just rebuilt motor and iam looking for a nice multi port Pm me your offer. Quote Link to comment Share on other sites More sharing options...
Greeny Posted November 8, 2011 Report Share Posted November 8, 2011 I'd buy it if we could get it to the east coast! What transporting on something like that/ Quote Link to comment Share on other sites More sharing options...
Skullzaflare Posted November 9, 2011 Report Share Posted November 9, 2011 what flange is the manifold? who made the manifold?in theory, if i came, i could throw another turbo on and drive home? Quote Link to comment Share on other sites More sharing options...
Captain! Posted November 11, 2011 Author Report Share Posted November 11, 2011 (edited) I'd buy it if we could get it to the east coast! What transporting on something like that/ I am not sure what the transport would be on it, but last time i transported something it was a minimum of 600 and went up to 1200. Basically you would be spending a decent chunk of change. I can look into it if you are serious. what flange is the manifold? who made the manifold?in theory, if i came, i could throw another turbo on and drive home? I believe the manifold was done by a shop. It looks like a pro did it regardless. Looks like a t3 flange and has the 5 bolt exhaust outlet. I can take some pics and measurements if you want. And yes all you would need is a turbo and off she goes. Actually if you just got the right hot side for the turbo you could strap it back in and off you go. Edited November 11, 2011 by Captain! Quote Link to comment Share on other sites More sharing options...
money mike Posted November 15, 2011 Report Share Posted November 15, 2011 Pm'd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.