Jump to content

odd Internal wastegate setup ?


Em Dot
 Share

Recommended Posts

first off, Im new to the Starquest field, but not to performance mods. Today i finally got a chance to pull the motor and swap bottom ends. I noticed that the turbo's internal wastegate had no vacuum lines to the ports and that the wastegate exhaust side was blocked off with a plate. now the car still boosted 17psi, and i have not done any mods to the car yet. Is this something that is common on these cars? i can tell the car has been slightly modded before. any ideas?
Link to comment
Share on other sites

yup, aftermarket gauge.. there was definitely no vacuum line to the wastegate. I'll be sure to route some vacuum to it. it made no sense to me but then again maybe there was some weird trick that i havent known about or something. thanks for confirming.
Link to comment
Share on other sites

EDIT***nvm found it. thanks

 

 

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/311312_10150343374107871_619952870_8009704_1506068140_n.jpg

Edited by Em Dot
Link to comment
Share on other sites

 Share

×
×
  • Create New...