illjill Posted April 26, 2010 Report Share Posted April 26, 2010 I know if anyone does a big brake upgrade they go 3000GT. But does anyone know if the Evo brakes will fit, or come somewhat close, heck even clear the stock starion/conquest wheels? Link to comment Share on other sites More sharing options...
v8starion Posted April 26, 2010 Report Share Posted April 26, 2010 (edited) 3KGT 4 piston calipers dont fit SQs with stock wheels. From the looks of them I dont think EVO 4 or 2 piston calipers would either. Edited April 26, 2010 by v8starion Link to comment Share on other sites More sharing options...
slowquest Posted April 26, 2010 Report Share Posted April 26, 2010 The rears will clear stock SHP 9's, but then you won't have a parking brake.... http://www.26liter.us/gallery/albums/userpics/10108/car_pics_012.jpg The fronts, I'm still working on, but want them behind stock wheels. I'll update when I figure it out. Link to comment Share on other sites More sharing options...
v8starion Posted April 26, 2010 Report Share Posted April 26, 2010 The fronts, I'm still working on, but want them behind stock wheels. I'll update when I figure it out.Spacers. I got the 3kgt calipers to fit on stock rotors.(tight fit) But the two pistons on the face side stick out 20mm past the mounting face of the rim/rotor. 20mm/25mm spacer would give it the clearance. Link to comment Share on other sites More sharing options...
slowquest Posted April 26, 2010 Report Share Posted April 26, 2010 i want "bigger" rotors, thinkin of tryin to machine down the outside edge of the Vic rotors until I get them to fit inside the wheel, be a pain when the rotors need replaced again, but oh well....lol Link to comment Share on other sites More sharing options...
conquest707 Posted April 27, 2010 Report Share Posted April 27, 2010 (edited) will z32 brakes fit? Edited April 27, 2010 by conquest707 Link to comment Share on other sites More sharing options...
D_Venable Posted April 27, 2010 Report Share Posted April 27, 2010 z32 turbo brakes are identical to the 3000gt vr4 brakes (minus nissan vs Mitsubishi emblem) Link to comment Share on other sites More sharing options...
conquest707 Posted April 27, 2010 Report Share Posted April 27, 2010 z32 turbo brakes are identical to the 3000gt vr4 brakes (minus nissan vs Mitsubishi emblem)well thats a fun fact! Link to comment Share on other sites More sharing options...
Dave-O Posted April 27, 2010 Report Share Posted April 27, 2010 I'm sure with a little elbow-grease and first-hand research someone can get something going. As for me, I'm currently looking into the twin-piston Cobra/Corvette caliper setup, since I've got all that crap at my disposal Link to comment Share on other sites More sharing options...
Recommended Posts