OutcastZeroOne Posted March 10, 2008 Report Share Posted March 10, 2008 I fianly got my truck back form my dad a couple of months ago. But its been handeling like crap. Ive got a full set of Energy Suspension Poly Bushings for my truck. (http://www.energysuspensionparts.com/products.asp?cat=2862) Today I was doing my fronts when I found that my right front sway bar frame mount had been broken in the accident. If a stock one will fit I can head out to the yards and pull one from there posibly. Any one got any info on this? Link to comment Share on other sites More sharing options...
Komeuppance Posted March 10, 2008 Report Share Posted March 10, 2008 www.mightyd50.com Those guys would be the d50 pros. -Robert Link to comment Share on other sites More sharing options...
88TSI_Rob Posted March 10, 2008 Report Share Posted March 10, 2008 If one mount it broken and the other is still intact, take the good one off and go to the junkyards and compare it to another D50/MM. If it doesn't match you can still compare it to other cars/trucks in the yard so you can find a good match. Link to comment Share on other sites More sharing options...
notfried Posted March 11, 2008 Report Share Posted March 11, 2008 If one mount it broken and the other is still intact, take the good one off and go to the junkyards and compare it to another D50/MM. If it doesn't match you can still compare it to other cars/trucks in the yard so you can find a good match. and don't rule out the B2200's Link to comment Share on other sites More sharing options...
Recommended Posts