importwarrior Posted February 15, 2014 Report Share Posted February 15, 2014 thats an easy fix if you want to fix the nipple and save the cruise control. the vacuum pump creates vacuum when under boost and keeps the cruise controlfunctioning along with the foot face actuators in the proper setting when boosting.if you eliminate the pump your foot face might fall to a default position until youstop boosting. get one of these from a RC car shop.it is a pressure nipple from the RC car nitro muffler to supply pressure to the nitro tank.just drill out the broke off nipple a little smaller then the threads of the nipple and screw this in. http://www.perthrc.com.au/images/thumbnails/12/250/12338.jpg Link to comment Share on other sites More sharing options...
nomad Posted February 15, 2014 Report Share Posted February 15, 2014 Very nice. Do you think it could be used on the thermovalve on the TB also (has to do with A/C)? Link to comment Share on other sites More sharing options...
JohnnyWadd Posted February 16, 2014 Report Share Posted February 16, 2014 Good fix. I have plenty of those on hand too. Link to comment Share on other sites More sharing options...
natallica Posted February 16, 2014 Report Share Posted February 16, 2014 Great idea... thanks man, would look nicer than my JB weld glue job! -N8 Link to comment Share on other sites More sharing options...
importwarrior Posted February 16, 2014 Author Report Share Posted February 16, 2014 (edited) Very nice. Do you think it could be used on the thermovalve on the TB also (has to do with A/C)? Depends on how much material you have to work with.Worth a try. Can't do any worse. Edited February 16, 2014 by importwarrior Link to comment Share on other sites More sharing options...
Recommended Posts