Jump to content



Mazda TPS conversion for the Starquests

From FUZE

  • Please log in to reply
No replies to this topic

#1 JAinsworth

JAinsworth

  • Moderators
  • PipPipPipPipPip
  • 16,871 posts
  • Gender:Male
  • Location:Lizella Georgia
  • Model:Conquest

Posted 11 July 2013 - 01:47 PM

View PostFuze, on 10 July 2013 - 11:48 AM, said:

Tutorial Alert! Please sticky in appropriate section.

OK fellas, Here is a quick run through for the installation of the Mazda TPS upgrade sold by Boostinmini.. This upgrade is a very good idea as anyone who has ever sweep tested a box full of Starion TPS's and not found a single good one will understand! The used Mazda TPS I got with this kit sweep tests perfectly.

First, you'll need to splice the Mazda TPS leads onto a stock TPS plug. The wiring diagram is below, there are a couple types of Mazda TPS's so two color variations are below.

Posted Image

Posted Image


Here's the Mazda TPS with stock connector soldered on and wrapped.

Posted Image


Here is the adapter mounted on the TB mixer. Nice O-ring mount. You will want to
cut a piece of the included adhesive foam and stick it behind the adapter to cover
the small gap between the adapter and the stock mount.

Posted Image


Here is the mounted Mazda TPS. It adjusts like the stocker. Take care when
installing it to make sure the notch in the TPS lines up with the pin on the throttle
shaft. Recommend using some blue loctite on the small nuts holding it on.

Posted Image


Here's a view from the top.

Posted Image

Easy breezy! Good stuff.









1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users