Does anyone know the ID of the PS System HP hose from the pump outlet metal fitting to the metal tubing?   Thanks In Advance.   Ken

So there's 2 vents on the valve cover. Where would you advise that I route these on an engine that's running an aftermarket carb & intake and no conventional air cleaner   btw the intake only has a provision for the brake booster and the heater

If it is not one thing its another,   I have no acceleration pedal, I have no kickdown (only kickdown i have is when it drops below 30mph) but I know on some cars you can just kinda roll on the gas pedal and it accel a little bit....I dont have that!   my transmission is rebuilt, shifts all four gears (even goes into OD with and without the button)   i know shelby is helping me a little bit but any more help would be greatly appreciated

I just read the 'Turbo 1st Spool Screech' thread. Maybe this is the same thing.   Getting a squeal. Sounds like a fan belt squeal but with a bit if an edge (sawtooth) to it.   Thought it might be a belt and they needed replacing anyway, so they are new.   Thought maybe a water pump/alternator/P.S./AC compressor bearing but...   The squeal is under acceleration and boost - starts at about 3 1/2 to 4psi boost. If I accelerate slow enough to avoid boost I can go to at least 4,500 rpm without the no