Jump to content

    ignition coil question

    prototype78
    By prototype78,
    http://i1018.photobucket.com/albums/af306/PROTOGENETIC2/20140504_114558.jpg   http://i1018.photobucket.com/albums/af306/PROTOGENETIC2/20140504_113457.jpg     2 days ago I noticed my car wouldnt start...and I thought was my ignition box ..I had 2..tested them and it wasnt it...my dad took the distributor out and noticed the pickup coil burned...we replace it but still doesnt turned on...so he check the polarization on coil with the tester and noticed both ends had power...so now I have this doubt

    WTB A pillar gauge pod

    Skrilla
    By Skrilla,
    Does anyone have/make a 2 gauge pod that looks clean?

    electrical trouble after harness swap

    slk88
    By slk88,
    Hello all, I have had this problem after swapping out the original harness with another one bought off a forum member. In fact I have had this same problem on my 88 Mitsubishi Starion with two swapped harnesses. The problem to put it in the simplest way is that I'm receiving a mixed positive voltage signal on 1 of the two injector terminals that should be reading 0 volts. The other injector terminal reads a perfect +12.8 volts as it should be. I am also getting the mixed positive signal reading

    83' starion Injectors...

    83Starion-11
    By 83Starion-11,
    My 83' starion's injectors are toast after 30 years of use, and I have no way repair or fix them (have tired many time) Looking to buy a pair of 83' injectors...if anyone is willing to help me out here or part with their, would of course need them to be a known working. It is the only piece I need to get my car back on the road   -Andrew   Paypal on standby

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...