Search the Community

In need of a good rear black injector last two I've gotten have been bad please help! 88-89

I have 8 Precision (PTE) low imp injectors for sale. Will separate in to packs of 4. 4 - $150 8 - $300 shipped. buyer pays fees. phil http://i1250.photobucket.com/albums/hh538/sqperformance/4sale/injectors_zpsvtlquqcm.jpg

I have a Maft set-up that I;m going to list in case anyone would like it. I'd rather sell it all in one shot, but may part it out if needed. All parts have less than 500 miles on them and work perfectly. 1) Maf translator, 1g-$150 2) Apexi SAFC II-$175 3) Lower Shores 650/950 injectors-$100 4) 3" Chevy maf, K&N filter, Mookeeh ahp-$100 I'm asking $425 shipped, obo I'll post pics later. My feedback: http://www.starquest...273&hl=notfried http://www.starquest...501&hl=notfried

starting to part out.90,000mile 1987 g54b has low oil pressure . knocks/rattles on drives side a little..needs rebuilt . available is stock ecu,power steering pump,heat shields. have all stock hard and soft pipes,catalyst converter,alternator,turbo , exhast maniold,intake manifold,2 intercoolers,oilcooler,oil lines power steering lines, good 5spd transmission. will be tearing down motor here soon . I have other engine bay items available in central Illinois. 217-891-8678 for inquiry thanks

Looking for a set of working, factory injectors. 1988 starion, esi-r (814) 969 9879 thanks

im looking for an 86 throttle body with the sensors and injectors if you could. tell me a price lets do this. tell me what you got.

Ill reply faster to PM's SEND ME A PM I STILL HAVE LOADS OF STUFF, I HAVE A FEW TRANSMISSION AND A FEW ENGINE BLOCKS AS WELL. PREFER LOCAL ON THE BIG STUFF.. GETTING READY TO HAUL STUFF OFF TO THE SCRAP YARD.. TIRED OF MOVING IT. Ive got good feedback, i wouldnt steer you all wrong http://www.starquest...showtopic=67854 just things that have been collecting over the years, i really dont need all this stuff lol! OBO on parts, shoot me a reasonable offer. MAKE UP A BOX, AND ILL MAKE YOU A SMOKIN DEAL so here it all is. i tried to list the parts in a way so the parts list should follow the pictures. all prices are plus paypal fees and actual shipping Stock 86-87 headrest- 20 TurboXS boost controller $40 SOLD Magna fuel rail $30 SOLD Stock injectors ( have cracks didnt leak) $50SOLD 1g DSM fuel pump $50 3 inch GM mas $50 SOLD Intake manifolds- $30 EACH Stock turbo (needs rebuilt) -$50 Garrett DSM turbo with down pipe (no shaft play) -$100 SOLD Garrett T4 turbo (no shaft play)- $100 SOLD 7 PSI wastegates- $5 Stock cam shafts-$20 EACHSOLD Heat shield (over turbo)- $20SOLD Stock over valve cover pipe (metal part) $10 Dipstick and tube- $10 EACH Heatshield (rusty one) $5 ABS hard line (runs along firewall) $10 Passanger side carpet panel $ 10 EACH Coolant return line (turbo) $5 Air canister hose (from canister to fender well) $5SOLD Valve cover pipe (from valve cover to oil seperator) $5 Intercooler hose (from turbo to intercooler pipe) $ 10SOLD K&N air filter (used) -$20 Mas air sensor (unknown condition)$ 15 EACH A/C line $10SOLD A/C compressor (unknown condition, spins free) $40 Luggage strap-$5 Dimmer switch (four prongs) $10 Over valve cover pipe (soft hose) $10SOLD Maroon tail light covers (inside trunk) $5 EACH EGR valves $5 EACH EGR switch $5 Coil bracket $5 Dimmer switch knob $5 Stock turbo exhaust housing $10SOLD Stock radiator hoses $5 EACH Idle position sensor (unknown condition) $10SOLD stock shifter $5 ABS computer $5 Speed control computer $5 A/C tensioner bracket (bracket only) $5 Used oil pump $15 Used oil pickup(needs cleaned) $10 Cruse control (unknown condidtion) $10 SOLD Radiator sensors $5 A/C tensioner bracket and pulley $10 A/C fans $15 EACH A/C bracket $15 Vacuum resivor $5 A/C controls 87 (mounting tabs broke)$15 EACH Stock turbo housing $15 SOLD Turbo oil drain $5 Cruse control bracket $5 SOLD ABS bracket $5 Charcoal canister and bracket $15 Throttle body base plate $10 Throttle body (no top has TPS)$20 Throttle body (has everything but the injectors)$30 SOLD Air canister (canister only, no lid) $10 Stock air filter (used) $5 Air filter inlet piece( the one that bolts to the fender)$5 Rear ashtray $5 Center seat belt $10 seat belt buckles (rear) $5 A/C hard line $10SOLD Oil seperator $15 Stock turbo V clamp $5 Timing cover $30 Tranny inspection plate $10 Throttle body top$5 Heat shield $10 Small fan $20SOLD Rear view mirror cover $5 http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111012_193915.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111011_194833.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_113210.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_112829.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_112238.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_111935.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_110938.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_110932.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_105417.jpg http://i223.photobucket.com/albums/dd23/19cturbo/IMG_20111008_103501.jpg

if some one that has good aftermarket injectors at a fair cost that is coming to p/f tn this coming weekend call me i live here and will becoming to the show my number 865_640_7620 thanks

i need stock 88 conquest injectors so i can use to see if that is the problem with this car

Looking for a pair of non-SHP 16x8 wheels and a complete TBI setup (intake manifold not needed). Shipping would be to SC 29203. PM me!!!

V8 swapping the quest so basically have a whole stock engine, trans, clutch, etc any part under the hood for sale. 1987 5 speed 121k miles: Engine has BS elim, new timing chain done within the last few thousand miles, new NGK plugs and wires, rebuilt tb from Brian @ lowershores ran great when pulled. Does not have alt sold that already. SOLD Trans is stock also with about 122k miles on it stock clutch replaced too. $200 1 extra valve cover. SOLD Trilogy 650/950 inj. SOLD Brand new water pump. SOLD New master cyl. SOLD

Exactly what are the purpose of the injector clips? Is it as they sound they just hold the injectors in? What do faulty or damaged ones cause the vehicle to do?.

Well this time is for real. Kicking myself for not already having the v8 swap done now!! The motor i purchased turned out to be a turd and has at-least some burnt valves and i got it as is. Not even interested into tearing into it honestly. So Its either v8 or im selling the whole car. Parts all for sale below! Make me a kick tail offer so i can move these parts!!! Shipping not included with these prices!! Paypal is Detriuch@gmail.com PM me if interested!!!! 1. 20g Tdo5h turbo. Has silver powder coated exhaust housing (inlet housing has a hairline crack about 2 inches but doesn't leak and still boost fine. Could swap out a housing if you really wanted to for around 100ish bucks) bolts right up to our manifold and down pipe. only about 4k miles!! $400 OBO 2. LC1 Wide-band 02 Sensor with Gauge and wiring. Just needs a new bung to weld in your pipe $ 110 OBO 3. Boost gauge (reads vacuum and up to 30lbs i think) $20.00 OBO 4.Safc 2 Controller with extended Harness $200.00 OBO 5. 2 Distributors. One with new rotor cap and new vacuum advance $ 60.00 OBO each 6. 2 factory style Fuel Pressure Regulator. One is pretty new! $30.00 obo for the newer.$ 15.00 for older one. 7. 88-89 ecu in 1987 case $60.00 OBO 8. Starter $35.00 OBO 9.Alternator $60.00 OBO Only a few months old 10. powder coated stressed relieved Factory Turbo Manifold $100.00 OBO 11.2gen dsm turbo air flow meter with filter adapter and Factory plug $70.00 OBO 12.Factory Front Mount Inter cooler $50.00 OBO 13. (1) 1987 Starquest Knock control Box $40.00 OBO 14. Accel Ignition Coil $20.00 OBO 15. 1987 5 spd transmission. Shifts decent $150.00 OBO 16. 1987 Starquest flywheel (needs resurfacing) $20.00 OBO 17. NGK Spark Plug wires $12.00 OBO 18.Hard-pipes for factory inter-cooler (Upper/lower with couplers Type S style bov and clamps) $200.00 OBO 19. Trilogy injectors with spacers 850/950. (only used for about 2 months)Need new o rings at the top though from pulling them out!! (fuel filter and pump/strainer was changed before install!!!$80.00 OBO 20. 2.5 inch down pipe with 2 bungs and with turbo gasket $ 55.00 OBO 21. Intake Manifold without sensors $ 25.00 OBO 22. Intake Manifold (Silver powder-coated without sensor) $40.00 OBO 23.Tps Sensor $45.00 OBO 24.ISC $55.00 OBO 25. Conquest Taillights in ok shape $40.00 OBO 26.I have 2 G54B engines. one has bad compression.( I think due to a burnt valve or 2) comes with arp studs. and more than likely other goodies inside. the other Has the rocker towers removed and needs either rings or valve stem seals. It smoked on Deceleration. Had great compression when pulled though!! No accessory's on either!!!. $250.00 OBO Takes them both!! (WILL NOT SHIP THESE!!)

I've decided to part out my project car, the original whole car post is here. I do not have time to part it out completely, I'm just going to remove the easy stuff. That being said, if you are interested in the rolling chassis, see the original post and just subtract what is posted here and that's what you get unless you want to bargain for anything in this list. All prices are negotiable: All parts were purchased new, installed, but never used unless otherwise noted $500 - Magna intake modified by Chad, installed but never used. (SOLD) $700 - Haltech Sprint 500 with long harness $200 - Modified Crank pulley, magnetic sensor with custom sensor bracket $900 - Turbonetics 60-1 series Ceramic ball baring T3/T4 Turbo $250 - T3 Exhaust Manifold $250 - Turbonetics EVO Wastegate $350 - 4 Injectors 850cc with leads and clips $120 - Haltech dual ignition module $80 - 2 dual output coils $180 - Fuel pressure regulator (click here) $100 - Alternator (i think it is a remanufactured, like new though) $50 - Starter (remanufactured, like new though) $6000 - Rolling Chassis with rebuilt engine with Wiseco 8-1 forged pistons, ARP bolts, Clevite bearings. Top end is stock rebuild with new lifters, bearings, and gasket set. New oil pump, removed balance shafts, all new timing, Centerforce dual friction clutch. The body was done by a professional, no Bondo on this car, all bad metal was cut out and new metal welded in. Two sections of the subframe where cut out and new metal welded in. I will be as upfront as possible to avoid not meeting expectations during final sale. The only bad things I can say about the body and chassis... Every thing that could come off was taken off, sandblasted, but not powder coated, I painted all sandblasted parts myself with engine paint. I can't say for sure that all suspension and steering components that were reused were reconditioned perfect, like the springs I just sandblasted and repainted with the assumption that I would come back later and replace with new. The underbody was not completely stripped and recoated, only the sections that got new metal were stripped and recoated with under chassis coating. Except for the engine bay, everything was stripped with baking soda blaster as far down as he could get. The interior is partly put together, I can take more pictures, but you will get it as is. The seats are not in good condition, but otherwise the interior is in fair condition. All parts listed in the original post (link above) that are not explicitly listed above are assumed to come with the car. Once I can get over to storage and start pulling off the parts I can provide detailed pics of each part. Until then here are the pics i have on hand... http://mmcclaskey.files.wordpress.com/2012/04/img_0192.jpg?w=1000&h= http://mmcclaskey.files.wordpress.com/2012/04/img_0550.jpg?w=700&h= http://mmcclaskey.files.wordpress.com/2012/04/dsc00406.jpg?w=1000&h= http://mmcclaskey.files.wordpress.com/2012/04/dsc00409.jpg?w=1000&h= http://mmcclaskey.files.wordpress.com/2012/04/img_0542.jpg?w=700&h=

GM Alternator $100 ship plus pay pal fees 1000cc injectors $200 ship plus pay pal fees Magna fuel rail $50 ship plus pay pal fees 4.6 mustang 65mm throttle body SOLD 89 Starion alternator $60 ship plus pay pal fees http://i116.photobucket.com/albums/o23/1skillz/c67adf5a.jpg http://i116.photobucket.com/albums/o23/1skillz/4f8b68d0.jpg http://i116.photobucket.com/albums/o23/1skillz/70dff0dc.jpg http://i116.photobucket.com/albums/o23/1skillz/c0d0633e.jpg http://i116.photobucket.com/albums/o23/1skillz/e4bdc477.jpg http://i116.photobucket.com/albums/o23/1skillz/cbe59526.jpg http://i116.photobucket.com/albums/o23/1skillz/4d5b0a87.jpg

I have a set of used Trilogy 650/950 injectors. They have been on my car for about 8 months. around 5k miles on them if that. They work fine. I just pulled them out since im running larger injectors due to the rest of my build. the stickers are kind of coming off but you can tell what they are and which is which due to trilogy writing (950) on the correct one. Will come with spacers needed as well to make this bolt right up to the factory fuel rail. these go for about $175ish new. Looking for $105 shipped in the U.S. Paypal is Detriuch@gmail.com

Startin to pull parts,,need to fund my up and coming project. The header is a stout unit,sch-40 welded steel,the turbo needs a full rebuild,but garrett t3 60-1 parts are readily available and easy to rebuild,tial wastegate 38 mm I believe,,, works great. Has -10 oil drain adapter,-6 water adapters. Header 300 tial 150 turbo 175 package deal 500.00,,,,will not sell the wastegate without selling the header first. Msd package,,,connect 4 wires and you'll be running,,well should be. All is still connected takin straight from my car,,has the unit,accel coil tach adapter. 160.00 Unorthodox pulley 125.00 pagemo adjustable cam gear,,,75.00 crank vents,,75.00 good dizzy,vac advance,,with fairly new taylor wires,,75.00 2- 1600cc feul injectors,,,130.00 2- 1050cc stock secondaries,,,,60 ea. Mitsu valve cover dirty one,,35.00 mitsu valve cover polished and welded 100.00 stock valve cover welded on fill cap,polished 20.00 http://i179.photobucket.com/albums/w316/conquest232/0a2d63a6.jpg http://i179.photobucket.com/albums/w316/conquest232/1f360651.jpg http://i179.photobucket.com/albums/w316/conquest232/f8b31a23.jpg http://i179.photobucket.com/albums/w316/conquest232/47cc2bb1.jpg http://i179.photobucket.com/albums/w316/conquest232/39acbad6.jpg http://i179.photobucket.com/albums/w316/conquest232/09520c2f.jpg http://i179.photobucket.com/albums/w316/conquest232/7a9eb955.jpg http://i179.photobucket.com/albums/w316/conquest232/7e71b89b.jpg http://i179.photobucket.com/albums/w316/conquest232/66b817dd.jpg http://i179.photobucket.com/albums/w316/conquest232/2bdc9194.jpg http://i179.photobucket.com/albums/w316/conquest232/8615d3fe.jpg http://i179.photobucket.com/albums/w316/conquest232/b350a936.jpg http://i179.photobucket.com/albums/w316/conquest232/49d0a802.jpg http://i179.photobucket.com/albums/w316/conquest232/48420ea0.jpg http://i179.photobucket.com/albums/w316/conquest232/04427c5f.jpg will be updating and posting prices shortly

A few more things I'v gathered up, again all prices are shipped Lisence plate bracket for the front $16 http://i9.photobucket.com/albums/a86/AndyW_/ebay/2011-10-28_20-22-28_522.jpg Another Misc Parts lot, the hardpipe takes a bit of trimming to fit but its a full 2.25" pipe with nipple, not real pretty but functional, the the dual guage pod is a universal one so it will take a lil to fit properly as well $45 http://i9.photobucket.com/albums/a86/AndyW_/ebay/2011-10-28_20-52-54_272.jpg http://i9.photobucket.com/albums/a86/AndyW_/ebay/2011-10-28_20-53-26_902.jpg

I have an 87 starion. I am having a problem when the engine is under load it cuts out around 3,000rpm but when i am sitting there i can i can rev up to 5500 rpm before it cuts out. I have been reading several post about testing the injectors. I cannot run the engine with just one injector hooked up. I have to have both of them hooked up for it to run. Is the green injector the primary? It will not start will just that one hooked up. But with the other one hooked up it will run for about a second........Any ideas????????