Search the Community
Showing results for tags 'd2'.
Found 7 results
-
From the album: Misc
D2s on a flatty, stock ride hieght and stock 215/60/15 tire. The stock spring perch was just clearing the shoulder of these tires by a 1/4" With the D2s at stock hieght, the tire is entirely within the threaded tube region of the coilover. -
ok here we go again. i am ready to do my D2's and would like a measurement. just take a measurement. i would like to know what you measured for the front and rear struts. i would like there to be no fender gap on stock tires and rims. in the pic below just pic a color of where you measured and post your measurements please.. http://i139.photobucket.com/albums/q299/I-W/D2s/D2-1-A_zps85e6bfdd.jpg -
Blew a strut, so looking to buy some new or used coilovers to replace mine. Going on an 87 starion. Let me know what you got.
-
SOLD!
-
To anyone running this setup I have a question. I am trying to get rid of the rear camber that comes with lowering the rear of the car so I bought the MK1 rear pillow ball kits. I have them adjusted like D_Venable, see pic below: http://i685.photobucket.com/albums/vv215/dsmconquest/P1310256.jpg First, the top of the strut (threaded portion) hits the outer diameter of the center hole inside the car where you can access the top nut on the strut without using the camber kits. I am thinking I will clearance this a little with a die grinder so it doesn't make noise. Anyone see an issue with this? Also, when I go to install these in the car, the top nut of the strut is hitting the camber plate when I install it. Will this cause issues? See pics below. I took pictures of the strut outside of the car so its easier to see and the plate is orientated how it would sit IF installed in the car. I think it may move a little when the car is set back on the ground and the nut may not hit, but I am not sure. Has anyone installed these to this setting and had the same issues? What did you do to remedy this problem. I will wait to reassemble until I get some responses. I appreciate any input in advanced. http://i685.photobucket.com/albums/vv215/dsmconquest/IMG_20130413_195047_539.jpg http://i685.photobucket.com/albums/vv215/dsmconquest/IMG_20130413_195109_048.jpg -Adam
-
Hey people, Nopi.com is selling Starion D2 kits now, about $1031 with free shipping. They also have a full catalog of Starion parts, check them out and give them some business. They have supported the import scene from the start and throw some huge events yearly to promote the scene. This link is the whole part list. http://nopi.com/dsp_...p?vcatyear=1989 Peace -
Prepping my spindles .More pices to come The 3 holes on the D2 tube are for button welds. http://i1187.photobucket.com/albums/z388/starionkiller/starion%20coilovers/th_2011-08-26141258.jpg http://i1187.photobucket.com/albums/z388/starionkiller/starion%20coilovers/th_2011-08-26141225.jpg http://i1187.photobucket.com/albums/z388/starionkiller/starion%20coilovers/th_2011-08-26163955.jpg http://i1187.photobucket.com/albums/z388/starionkiller/starion%20coilovers/2011-08-26163955.jpg
