night34606

Hey I am looking for a good solid head with the full valve train and cam that I can just slap out my car and go. I have an 87 if that helps. Not looking to spend more than 80 shipped. Best deal gets the cash. I have money in hand so let me know.

Well when I put this up I thought it was going to need a rebuild. I only kept it going cause of the people that started bashing so I just had to be me. Going to do a head gasket and head and hope that works if it fails and needs a rebuild not sure if I will stick it out though.

I appreciate the advice. I did not put this up to be arrogant but you ask for advice from people and they start making fun of you well... F'em

Alrighty.... then.... so I meet the forum rules then looking to get 10,000 dollars for it. Does that sound OK or could someone give me a more reasonable price they think its worth? Otherwise first one with 10k can have it.....

Trying to gauge the cars value and have you all tell me what she is worth.

OK Since I have to post a price 10,000 sound reasonable or some feedback of reasonable might be good. OK, Its looking more and more like I might need a full rebuild since it looking like rings and I do not think I feel like messing with this car anymore despite how much I like it. I am trying to gauge its value as it has a lot of after market parts in it. Its an 87 Conquest with black leather interior. The interior is very clean I would say 7 out of 10 for its age. The exterior has no damage but is primed with a heavy base ready for paint. The car runs just not well right now. Got the following on the comp test 115, 95, 120, 120 and oil in the cylinder did make the comp go up drastically (like 180-210). Below is a link to some pics of the exterior and a list of what it has done Add ons 16g in the 12a housing makes for a nice sleeper Custom hard pipes with silicon couplers and T clamps After market inter cooler Aluminum radiator Wilwood big brake kit 3 inch exhaust all the way back Thermal dynamics muffler Turbo XS manual boost controller Greddy type S BOV Steel braided brake lines True short throw shifter (not just cut) Light weight fly wheel Momo adapter and wheel Autometer phantom boost guage (in stock location) ST Springs all the way around Blues in back for struts Has door mounted seat belts - tracks are still there for the auto Polished valve cover Powder coated power steering reservoir Powder coated air canister http://peoplegettinghit.com/Starion/Front.jpg http://peoplegettinghit.com/Starion/Back.jpg

Is the head good and uncracked on either? If so I might be interested.

Do you still have the part below in the pic? If so PM me back http://peoplegettinghit.com/GarageSale/parts1.JPG

Would like the TB, injectors sensors and the works from base up as one unit.

PM Sent

What happened to me buying the TB and injectors? I was sitting with Money in hand ready to buy just waiting on a response to verify it was a green and black injector then was sending cash.

Need a temp solution on my back tires until I get rims and finish my car. Anyone got a decent set of 225/50/16 cheap shipped to 34606 FL or if your close I could pickup?

Hey I am fed up with my TB and injectors and tired of patching it up. Does anyone have a GOOD working TB with injectors (green and black) top mixer housing pressure regulator etc that is good and I can just bolt on plug in and go? FIP has a nice setup but not looking to spend that much right now. I have some parts I can trade lsted below Black Chrome powder covered intake manifold Carbon Fiber canister muffler with titanium tip Stock dodge neon fuel fail and injectors for anyone going MPI Tons of Dodge neon parts

Hey all. This is not truly a group buy and maybe should be a sticky in another sections so admins do you work lol but.. I have been finishing up my intake, ovcp, inter cooler piping etc and got all my parts through siliconeintakes.com. While working to get the right parts I spoke to the owner Jon about our club and he decided to give us all 10% off anything on the site. Just put your parts in the cart as you normally would and when you go to check out add in the coupon code 'starquest' (case sensitive) and you will get 10% off. This guys reducers, couplers and t-bolt clamps are already cheaper than I have found anywhere (like 11 bucks) and I just purchased all new ones for myself (8) and they are great products. I know I am still a newb but I like this club and love my car so hope this helps everyone!

I have a brand new Felpro one here. PM me with an offer shipped if you intrested.

What is the Mistu part number for the front and reas all around my fronts are pretty bad and I am sure my rears propabbly are once I take a look.

Need the following if you have it PM me with prices shipped to 34606 FL A set of good black A-pilars Fog Lamp relay (under hood near air intake) Left and Right pop up relays (under hood near air intake) Working Oil pressure sending unit 7 Lugnuts

Looking for a few items - list below. I have cash and parts to trade listed below as wel Need: Coil overs - prefer dual spring set Struts - Looking for aftermarket and next to new only - non adjustable A set of good black A-pilars Fog Lamp relay (under hood near air intake) Left and Right pop up relays (under hood near air intake) Working Oil pressure sending unit 7 Lugnuts Items for trade Black Chrome powder coated intake manifold A/C Compressor A/C main large line 6.5 inch motorized ceiling mount TV Pair of Pyramid tweeters

Great but one questions - Where did the 90 degree piping come from so we can get this?

Anyone?

I am finishing up on my conquest and wanted to give a better control and stance to the car. I was thinking of doing the below - let me know what you think. I am not auto crossing the car just street fun and maybe a trip once an a while to the quarter mile. GR2s all the way around Cosmo dual spring coil over (if they ever come back in stock) TEP rear strut bar (already have a front) Questions: Are the camber plates really needed for just street driving and racing here and there? Anything else I should do while I have everything apart? Are my brand choices the best for the money considering I am not trying to break the bank but have some money to play with?

MOST NEEDED ITEM ON LIST ---> Good non leaking fuel line (the one that goes from mixer to filter) and the screws that hold it to the mixer housing Black A pilars in good shape and not sun baked as I am putting a guage pod on and do not want them to crack The pocket that goes by the radio Working headlight assemblies the whole things readyto just bolt in and clip the wiring on - prefer silver painted or with good non shaker can primer Working stock oil pressure sending unit Working aftermarket electrical oil pressure sending unit for my Faze gauge I have cash in hand and also a black chrome powdercoated intake manifold to trade along with all A/C and Power steering parts.

Hey I am loking for a decent wide band. I have a few parts to trade to hopefully eat some of the cost. The parts I have are below: Black Chrome powder coated Intake manifold Working A/C Compressor A/C main large line Power Steering system (Resivor, lines and pump) Some misc car audio PM about that

All parts are best offer. Shipping will be from 34606 if you want an idea on shipping costs. A/C compressor A/C lines Power steering lines Power steering pump Power steering reservoir Air canister Canister style muffler - Megan is the brand and it comes with the silencer. Not good for our cars (2.0-2.25 step) but good for any other n/a import Black chrome (powder coat) intake manifold never installed I am looking for a few things also if anyone wants to trade list is below: Full working headlight assemblies - I want to be able to bolt in plus in and have working headlights again (mine are stuck up) Wide body lower air dam Driver side A pillar – black

ttt