csdisme

I apologize to everyone for being gone so long after starting this post, all I can say is cancer sucks!! I am feeling much better now and I actually got home intime for Thanksgiving To the people that had contacted me earlier regarding many of the items I have for sale, I would like to offer them to the folks that made the original requests. Please let me know if you are still interested and I will box your stuff up and get it out to you right away. My son is staying with us fora couple of weeks while I try and get back to my normal activity level, so he is available to help get your items shipped out. I did receive payment on one item and I didnt get a chance to get it shipped, but I will send it Monday. Thanks everyone for bearing with me, I would just like to get this stuff sold and to people that can/will use it. It has collected dust long enough.

Sorry for dropping out of sight, I had a nasty turn with a staff infection from my latest surgical procedure. I couldn't get a wifi signal in my room and the nurses took my iPad. They didn't have much of a sense of humor. I got out in the shop today for a little while and started getting the things that everyone ordered together and into boxes. The parts that will fit into the Priority Mail boxes I should have together hopefully tomorrow. I will try and get totals for everyone In the next day or so. Also, I will go through my PM's and respond by tomorrow. Thanks for everyone's patience and understanding, I do appreciate it. Cullen

I apologize for the undue anxiety, I was trying to do too many things at once today and got the places messed up. Even though I listed you as third, I knew you were first in line for it.

Sounds good, I will get it together for you. My PayPal address is csdisme@att.net I'll let you know when it ships. Thanks

I wil get some pictures tonite and get them over to you. I will mark them SOLD Pending Approval as you are first in line. Thanks

Thanks for your interest! I have you first in line for: #67, #67B, #70, and #84 You are at: #89 - third #70 and #68 are different hoses, I will get better pics for you later today. I will mark the items sold that you are first in line for and will get you a preliminary total. Please let me know if they are any changes and also on the other item you PM'd me about. Thanks!

I have you: #2 - first #3 - second #14 - third #15 - third #68 - second #90 - fifth #91 - fifth #110 - second We can wait and see how the others work out, or I can get you #2 now, just let me know. Thanks,

I have you : #3 - second #60 - third #69 - second You are first for #111 - muffler We can wait and see how the others go, or I can get you #111 now, just let me know. Thanks

I have you as second in line for #60, the bushing kit. Thanks and I'll keep you updated

Replied to PM Thanks

I have you first in line for all of the items you listed. I will get more info for you on the Turbo. It is a wet turbo with both oil and water cooling. Thanks and please let me know

Replied to your PM Thanks

I have you second on the sway bars. #61 are roll center adjusters - I got them from a group buy 101Propose was running a while back. You are first for them if you want them. I believe I have the power steering adapter, do you know the size and I'll check to be sure. I know I have the oil supply adapter for the turbo if that's the one you need. Thanks and let me know

You have first shot at the Sway Bars and I will post and send you pics tomorrow. Thanks

To be honest, I think at this point I am going to stick at this price. I will give you first shot if you would like both as I would like to sell them as a pair if possible. Thanks for your interest and please let me know

I will get you a price on those fittings. Are you looking for straight, 45deg or 90deg? I don't think I have the damper. Thanks

I apologize to everyone for being gone so long after starting this post, all I can say is cancer sucks!! I am feeling much better now and I actually got home intime for Thanksgiving To the people that had contacted me earlier regarding many of the items I have for sale, I would like to offer them to the folks that made the original requests. Please let me know if you are still interested and I will box your stuff up and get it out to you right away. My son is staying with us fora couple of weeks while I try and get back to my normal activity level, so he is available to help get your items shipped out. I did receive payment on one item and I didnt get a chance to get it shipped, but I will send it Monday. Thanks everyone for bearing with me, I would just like to get this stuff sold and to people that can/will use it. It has collected dust long enough. I didnt realize this was going to cause the response it has. Obviously I hoped it would but even though I tried to make it as easy as possible for everyone (myself included), keeping track of what everyone wants and also trying to determine who asked for each part first is a bit time consuming. I am trying to work this as fast as I can, but please be patient and I will update and reply to posts as fast I can. I am paying attention to when I received requests and I am giving the first to respond first dibs on the part. Please remember, just because you respond first in the thread, I may have gotten a PM or email asking for the same part before yours. I am not into playing favorites, I never have been, and I have been on this forum a long time. Thanks for understanding Well, here we go. SInce I didnt have any serious interest on all the parts together I decided to sell everything individually. I finally waded through all the different parts, took pictures, and broke everything down and priced each part. I didn't realize how much there is, so to make things easier for everyone, I came up with a procedure that I will go by. All parts listed have a number assigned to them. This number corresponds to a picture or pictures. The pics can be seen at this link: PICS Extra pics will be provided upon request. Certain items don't have pictures as the item is in its shipping box or too bulky to move by myself, and I don't want to take a chance of damage (to the part or me). If you are interested in a part that does not have a picture, please let me know and I will try and get one over to you and posted. I am somewhat flexible on the prices, but I'm not going to give the stuff away. Please no crazy lowball offers. Most of the items are brand new, never mounted or installed, so please keep that in mind when sending your offer. If it says "New" then it is brand new, if not, it is either a part I bought used, or it is off the car itself. I may also be up for a trade or two, so don't be afraid to ask. The fine print: I will ship the cheapest way possible and will try and combine items together to keep the costs to a minimum. If at all possible, I plan on shipping Priority Mail. Weight isn't an object, and the boxes are free and I can check prices without needing to know the size and weight of the box. I will accept payment just about any way you want to pay. PayPal will require an additional 3%. If you don't have PayPal but want to use a credit/debit card, I can accept them through my merchant account. I will be a little firmer on pricing if paying that way so I can cover the bank fees. Please do not send payment until we "talk". That way we can figure out shipping and if I can combine things together., etc. I will mark things sold while waiting for payments, but I will continue to take names just in case things fall through. I am a big believer in communication, so please stay in touch with me. Please use the item number in any correspondence to keep things straight. I can't think of anything else at the moment, if you have any questions please give me a shout. It will be faster to use my direct email as it goes straight to my phone. csdisme26@gmail.com Thanks for bearing with me and good luck! Hopefully I got to everyone so far. I am updating this at 12:00 AM on 9/22, so if you responded or changed anything after then it will not be reflected in this list. If you see an error, please let me know. Please dont send me a PM or email saying that you were first in line for something, or you had dibs on it. I took everyonestimw when they FIRST contacted me. It didnt matter if you posted in the thread, sent me an email, or sent a PM. I used the time and date on however you got in touch. Asking for pics, more info and saying you are "Interested" doesnt count. Please review the list and let me know if I have everything you have requested. I will be sending everyone any info or pics they have requested this weekend. I will be sending each person a PM with their total once I get everything settled and shipping figured out. I have marked everything that is listed next to you name as sold. If you dont see your name listed, please let me know right away as I may have either missed or not seen your request. MSTIEG - 89, 67, 67b, 70, 84 LIONKING - 90, 91 JOHNNYWADD - 61 RANDY - 11, 22, (2) - 34, 39, 42, 51, 68, 69, 75, 76, 77, 78, 79, 80, 81, 87, 88, 93, 94, 95, 96, 101, 166, 135, 134, 55, 30, 17, 99, 112 TAEISALLIN - 120, 122, 123 8687TSIWIDEBODY - 3, 14, 15, 110 CHARLES - 56, 57, 60 JDEAN - 3, 111 MUNKEE - 2 TM - 121 QUIKCONG - 71, 72, 26, 27, 100, 98, 160, 153, and 3 of 154 SPEEDYQUEST - 64 KEV - 46, 55, 125 MRSTARION - 53, 36,126 JIMBOTSI - 65 DAN (i dont have your screen name) - 26, 27, 86, 20 MARCOS (I don't have your screen name) - 4 BIL - 29, 5 ITEMS WILL BE MARKED SOLD AND WILL BE RED UNTIL I HAVE RECEIVED PAYMENT. THEN THEY WILL BE MARKED AS PAID THE COLOR CHANGED TO BLUE. WHEN I SHIP THEM I WILL CHANGE THE COLOR TO GREEN AND MARK THEM AS SHIPPED. Car Parts List #1 (2) Brake Dust Shields - $10 both #2 (2) Polyurethane Engine Mounts - Black - New - $70 - SOLD #3 (2) Polyurethane Differential Mounts - Black - New - $50 - SOLD #4 Water Pump - New - $30 - SOLD #5 Burton's Tinted Foglight Covers - New - $20 - SOLD #6 Ball Bearing T4 Turbo - New - $950 MORE PICS POSTED #7 Haltech E6X Engine Management System - New - $750 #8 HECU2 Dual Channel Ignition Module - New - $75 #9 (2) Haltech Coil Packs - New - $60 both #10 Plugs, Pins, Boots, Adapters - New - $50 all #11 Oil Pan - Blue Powdercoated - $25 - SOLD #12 Rear View Mirrors - Inside - $5 each #13 Dome Light - $5 #14 MK1 Aluminum Strut Bar - Rear - $75 - SOLD #15 MK1 Aluminum Strut Bar - Front - $75 - SOLD #16 Steering Link - $10 #17 Aluminum "StarQuest" Radiator Cap Cover - $10 - SOLD #18 Fuse Panel Cover - Black - $2 #19 Power Antenna - $20 #20 Dual Pillar Gauge Pod - $20 #21 Stock Turbo Heat Shield - $10 #22 MK1 Coilover Struts Front and Rear - $950 set - SOLD #23 Steering Relay Rod - New - Discontinued - MB489447 - $175 #24 Stock Adjustable A/C Belt Tensioner and Bracket - $10 #24 MK1 Camber Plates - Front - New - $150 #25 MK1 Camber Plates - Rear - New - $135 #26 Mirror Switch - For Non Automatic Belts - $10 - SOLD - Pending Payment #27 Coin Tray - For Non Automatic Belts - $10 - SOLD - Pending Payment #28 (2) Starters - $15 each #29 Power Steering Pump - Rebuilt - $40 - SOLD #30 Sunroof Seal - $30 - SOLD #31 Pro-5.0 "Power Tower" Shifter - T56 Transmission - New- $125 #32 Stock Turbo Oil Line - New - MD084550 - $20 #33 Complete Fuel Lines - Stock - Intact - $30 #34 (2) Air Conditioning Plug - New - MB272166 - $5 each - (2) SOLD #35 Alternator - Larger, Higher Amperage - with Pigtail - New - $100 #36 Alternator Bracket, Pulley & Pigtail - For Above Alternator - $25 - SOLD #37 Raptor Blow Off Valve - New - $200 #38 Turbonetics RG-45 Wastegate - New - $350 #39 Timing Chain Rebuild Parts - New - $30 - SOLD #40 Marnal Hydraulic Intake Valves - New - $25 set #41 Hydraulic Exhaust Valves - New - $25 set #42 Schneider Dual Valve Springs - New - $50 set - SOLD #43 Aluminum Intercooler - 3" x 12" x 30 1/2" - 3" intake - New - $125 #44 Glove Box - Black - $25 #45 Air Conditioning Bypass with Plug - MB123891 - New - $40 #46 (2) Rear Calipers - Complete - NEW - $150 pair - SOLD #47 Trick Flow Inline Fuel Filter - 10 AN 100 Micron - New - $20 #48 Trick Flow Inline Fuel Filter - 10 AN 10 Micron - New - $20 #49 Aero motive Inline Fuel Filter - New - $10 #50 Paxton Electric Inline Fuel Pump - $100 #51 Suspension Bolts - New - $50 - SOLD #52 Custom Wheel Spacers - Billet Aluminum - 1" Thick - $175 #53 MK1 Support Arms - New - $100 - SOLD #54 Paxton Fuel Regulator - $60 #55 Porter field Racing Brake Pads - Carbon Kevlar - Front/Rear - New - $65 - SOLD #56 Aluminum Catch Can - Large - New - $20 - SOLD #57 Aluminum Catch Can - Small - New - $15 - SOLD #58 (4) Stock Polished Rods - 1 Missing Cap Nut - 1 Has Rough Bore on Big End - $40 set #59 (1) Emergency Brake Cable Sets - $40 set - SOLD (1) set #60 MK1 Suspension Bushing Set - New - $120 set - SOLD #61 MK1 Strut Spacer - Aluminum - New - $60 - SOLD #62 (4) Oil Squirters - $30 set #63 AutoMeter Angled Gauge Rings - New - $10 #64 AeroCatch Hood Pins - New - $30 - SOLD #65 Crank Scraper - New - $60 - SOLD #66 Polyurethane Transmission Mount - T56 - New - $25 #67 Clutch Cylinder - New - $15 - SOLD #67b Clutch Reservoir - New -$15 - SOLD #68 Braided Clutch Line - New - $20 - SOLD #69 Braided Brake Lines - New - Full Set - $75 - SOLD #70 Braided Line - New - $25 - SOLD #71 Electric Water Pump - CSR - New - $75 - SOLD #72 Oil Cooler with Electric Fan - New - $50 - SOLD #73 3.90 Gear Set - $250 #74 (4) Precision Injectors - 95lb - New - $180 set #75 (2) Inner Tie Rods - New - $60 set - SOLD #76 Tie Rod Spacer - New - $15 - SOLD #77 (2) TRW Ball Joints - New - $70 both - SOLD #78 (2) Rear Axle Spacers - New - $25 both - SOLD #79 (2) Outer Tie Rods - New - $50 both - SOLD #80 Steering Shaft Clamp - New - $5 - SOLD #81 Steering Shaft Socket Cover - New - $5 - SOLD #82 PermaCool Remote Oil Thermostat - New - $25 #83 Cooling Mist Alcohol Injection System - New - $160 #84 Braided Stock Steering Line Set - New - $100 - SOLD #85 Headliner with Sunroof - Black - $60 #86 Underwood Insulation - New - Discontinued - $75 -SOLD #87 Blue Vacuum Line - 30' approx - New - $18 - SOLD #88 Black Vacuum Line - 30' approx - New - $18 - SOLD #89 Chad's T56 Transmission Conversion Kit - New $450 - Would prefer to sell with #'s 144 & 146 - SOLD #90 Suspension Techniques Anti Sway Bars - Front/Rear - Pics on Request - New - $185 pair - SOLD #91 Suspension Techniques Anti Sway Bar Mounting Kits - New - $30 - SOLD #92 Battery Relocation Wiring Kit - New - $100 #93 (10) OEM Cylinder Head Manifold Studs - New - MS401428 - $10 all - SOLD #94 (2) OEM Cylinder Head Manifold Studs - New - MD031537 - $2 all - SOLD #95 (6) OEM Rocker Arm Nuts - New - MF4300005 - $2 all - SOLD #96 (7) OEM Exhaust Manifold Nuts - New - MD092806 - $5 all - SOLD #97 (3) Earl's -4JIC to 12mm Adapter - Stock Turbo - New - $6 each #98 OEM Hood Prop Rod Grommet - MB020667 - New - $2 - SOLD #99 (10) OEM Lockwashers - MF450405 - New - $2 all - SOLD #100 OEM Hood Prop Rod Clip - MU481007 - New - $2 - SOLD #101 (10) OEM Hood Insulation Panel Clips - MB153819 - New - $10 all - SOLD #102 Summit Brake Proportioning Valve - New - $30 #103 Kirk Roll Bar - Rear Supports Removable - New - $250 #104 (2) Corbeau Racing Seats - Driver/Passenger - New - $600 pair #105 (2) Corbeau Seat Brackets - Made For '83-'89 Starion - Driver/Passenger - New - $150 pair #106 (2) Racing Harness - 5 Point - Twist Lock - New - $60 each #107 RCI 16 Gallon Fuel Cell - 10 1/2" x 17" x 23" - with Sump - New - $100 #108 Custom Aluminum Radiator - Ron Davis - 18 3/4" x 26" - New - $350 #109 (2) Dash Panels - $40 each #110 MK1 Stainless 3" Exhaust - Turbo Back with Flex Downpipe - Pics on Request - New - $400 #111 MK1 Stainless Twin Tip Muffler - 3" Inlet - New - $50 - SOLD #112 OEM Front Bumper Support - NEW - Discontinued - Pics on Request -$350 - SOLD #113 T56 Transmission - Converted to Use Mechanical Speedo - $900 #114 Windshield - Pics on Request - New - $125 #115 Carpeting Set - Black - PICS POSTED - New - $100 #116 MK1 Carbon Fiber '83 Hood - PICS POSTED - New - $475 #117 MK1 Carbon Fiber Air Dam - PICS POSTED - New - $350 #118 MK1 Carbon Fiber Roof Spoiler - PICS POSTED - New - $150 #119 Big Brake Kit - New - $550 #120 Big Brake Front Drilled & Slotted Rotors - New - $150 - SOLD #121 Drilled & Slotted Rotors - Stock Size - Front/Rear - New - $125 all - SOLD #122 Wilwood SuperLite Brake Calipers - 4 puck - For Big Brakes - New - $220 pair - SOLD #123 Wilwood High Performance Brake Pads - New - $55 set - SOLD #124 RCI Angled Fuel Cell Filler Neck - New - $40 #125 (16) OEM Hood Panel Clips - New - $15 all - SOLD #126 CrankVents - Both Pieces with Hose - $50 - SOLD #127 Braided Hose - -10 x 3' - New - $12 #128 Braided Hose - 1 1/2" x 30" - New - $20 #129 Stock MAS - Unhacked - $10 #130 NOS Bottle Bracket - Billet Aluminum - New - $85 #131 Aluminum Air Intake Pipe - 3 1/2" x 18" - $20 #132 (4) Corbeau Harness Shoulder Pads - Black - New - $25 set #133 (3) Stock Oil Pickups - $5 each #134 CV Boot Kit - Front - NAPA - 686-2161 - New - $40 - SOLD #135 CV Boot Kit - Rear - NAPA - 686-2179 - New - $40 - SOLD #136 Blue Aluminum Tubing - 25' - 1/2" diameter - New - $25 #137 Red Aluminum Tubing - 25' - 3/8" diameter - New - $25 #138 Silver Aluminum Tubing - 25' - 1/4" diameter - New - $25 #139 Braided Hose - 10' - -10 size - New - $40 #140 Braided Hose - 20' - -8 size - New - $60 #141 Braided Hose - 20' - -6 size - New - $55 #142 Braided Hose - 20' - -4 size - New - $60 #143 Braided Hose - 3 Sections -16 with swaged fittings - $75 #144 Aluminum Flywheel - 10 lb - T56 - New - $325 #146 Pressure Plate & Kevlar 4 puck Sprung Disk Clutch Set -T56 - New - $300 #147 Fuel Cell Bracket - Pics on Request - New - $25 #148 Stock Alternator Bracket - Powdercoated Silver - $25 #149 Accusump Oil Reservoir - Pics on Request - $100 #150 ZEX NOS System - with hose - PICS POSTED - $185 #151 NOS Tank Heater - PICS POSTED - $40 #152 NOS Tank Remote Valve - PICS POSTED - $85 #153(26) Silicone Pipe T-Clamps - 3" - New - $50 all - SOLD #154(4) Silicone Pipe T-Clamps - 4" - New - $15 all - (3) SOLD #155 Silicone Pipe T-Clamp - 5" - New - $5 #156 Fuel Pump Speed Control Unit - New - $125 #157 Radiator Fan - Electric Pusher - New - $60 #158 (4) Silicone Pipe T-Clamps - 2" - New - $6 all #159 (12) Silicone Couplers - 2 3/4" - Blue - New - $40 all #160 (2) Silicone Transition Couplers - 2 3/4" to 3" - Blue - New - $12 #161 Silicone Transition Coupler - 3 1/2" to 4" - Blue - New - $8 #162 Silicone Transition Couplers - 2 1/2" to 2 3/4" - Blue - New - $6 #163 Intercooler Pipe Kit - 2 3/4" - Polished - Uncut - PICS POSTED -New - $100 #164 Engine - Complete Short Block - Wiseco Pistons - Pauter Rods - Knife Edged Crank - ARP Fasteners- ARP Manifold Studs & Nuts- Custom Water Pump BlockOff Plate - Custom Aluminum Underdrive Crank Pulley - Custom Pulley Adapter With Haltech Magnets - Haltech Pick Up Mounting Bracket - Marnal Head Built by Lower Shore Performance - Roller Rockers - Titanium Valves - Ported & Polished - Custom Schneider Cam Assembled and Built by Victory Racing Engines Never Started - I would prefer to sell as a unit, but I am not opposed to separating it. I will not piece it out though. $3500 Head Only - $1750 Block with Everything Minus Head - $2000 #165 Tires & Rims Falken Azenis RT615 - 235/40R18 - Front Falken Azenis RT615 - 285/35R18 - Rear Rims are TSW Thruxton with a 20 mm offset both front and rear Mounted and Balanced by TiresUSA Never Mounted $2000 Extensive Assortment of AN Fittings - Prices on Request #166 Just about all the Wheel and Diff Bearings and Seals - New - Prices on Request - SOLD Complete Black Interior less Front Seats #171 - Complete Conquest Shell - Completely Stripped - White - No Rust - Pics Posted - $300 #167 Title and VIN Tags for another Quest Most All Suspension Parts #168 Complete 6 Bolt Rear - Stock Gearing -Pics Posted Other Parts prices & Pics will be posted as I Come across them. #169 MOMO Steering Wheel Adapter - $45 - Pics Posted #170 Taillights - $100 - Pics Posted

Thanks for all the interest. I will try to spend some time this weekend possibly putting some prices on individual items. This was a difficult decision for me not so much because of the investment, but more so from the time involved. I appreciate the support.

I have put this off as long as I can, but it's time to part ways with my Starion project. Complications from a number of medical issues have kept me from working on my project for almost 2 years now, and I don't see things improving to the point where I will be able to move forward. I started accumulating parts for this project a very long time ago. My goal was to have everything on hand to totally rebuild the car from the ground up. I made purchases over the years and as newer and better items became available I would buy the newer stuff and sell the older. It was a pretty interesting (and expensive) process. I did not cut corners with anything, and just about everything is there to put together an incredible car. The only large items that I don't have is an intake, exhaust and drive shaft. I will list the items that I have, but I will probably need a couple of days to go through everything. There is a ton of little things, and a bunch of big items. I will say up front, I would truly like to sell this as a package as it is going to be a pain in the arse to ship all if it, especially the bigger/heavier items. First off, the car body itself is nearly perfect, no rust, the underbody has been completely stripped, sandblasted and repainted. There are a few areas that will need to be resprayed, but for the most part, the hard work is done. The rear tire well has been cut out and a steel panel has been welded in its place. The idea was to build a solid flat platform for a fuel cell. All the exterior body panels are there, the interior has completely been removed. There literally is nothing on the body with the exception of the doors and the rear hatch. The short block was completely done by Victory Racing in Cleveland. I wanted to make sure the critical components were assembled perfectly, so I left the assembly and machining to them. Now for the good stuff, all the parts. Most everything is brand new, never being installed or attached to the car. A few items are used, and I will point those out. Engine Parts Wiseco Forged Pistons Pauter Billet Rods Schneider Cam Marnal Head - completely rebuilt by Brian at Lower Shores Performance Balanced Crank - lightened and knifedged by Victory Racing ARP Rod and Main Bolts ARP Head Bolts ARP Manifold Bolts New Oil Pump Adjustable Cam Gear Aluminum Crank Pulley - custom turned with rare earth magnets installed to use with Haltech Custom Water Pump Block Off plate - was going to run an electric water pump Paxton in-line Fuel Pump -used Aeromotive Fuel Pump Controller Haltech EMS Inline Fuel Filters Paxton Fuel Regulator -used Everything to run new oversize fuel supply and return lines - aluminum fuel lines, braided hose, tons of AN fittings Turbonetics T4 Turbo - oil/water cooled - ball bearing Turbonetics RG-45 Wastegate Turbonetics Raptor BOV Intercooler and Aluminum Pipe Kit All Silicone Connectors and T-Clamps Electric Fan Electric Oil Cooler Custom Aluminum Radiator - has tabs welded on for mounting and AN fitting for radiator hose Nitrous Setup - chrome tank, heater, remote valve - used Alcohol Injection System Billet Nitrous Tank Bracket 16 Gallon Fuel Cell 2 Gallon Cell - Alcohol (I'm sure there's more) Suspension Mookeh's Strut Set - complete ready to install Complete Poly Bushing Kit Suspension Techniques Front and Rear Sway Bars Mookeh's Front Adjustable Control Rods Mookeh's Front and Rear Strut Bars Mookeh's Front and Rear Adjustable Camber Plates Big Brake Kit - Front -Includes everything (rotors, calipers, brackets, hardware) Drilled and Slotted Rotors -Rear New Rear Calipers Braided Brake Lines Poly Trans Mount Poly Diff Mounts Stedebani Bolts (I'm sure there's more) Running Gear T56 Transmission Fidanza Custom Flywheel - new Fidanza Disc and Pressure Plate Chads Conversion Kit - to mount T56 to G54B Concentric Wheel Spacers - Rear New Aluminum 17" Rims and Tires - 9.5 wide rear, 8.5 wide front (I'll verify sizes and makes) 3.90 Gear Set 6 Bolt Axles (I'm sure there's more) Body and Interior Mookeh Carbon Fiber Hood Mookeh Carbon Fiber Front Spoiler Mookeh Carbon Fiber Rear Roof Spoiler New Carpet Set Corbeau Racing Seats Corbeau Seat Brackets Roll Bar with removable rear bar Racing Harmesses New Speedo and Tach Complete Set of blackout gauges Gel Battery and Billet Mount Rear battery kit Most Interior parts, no stock front seats 2 dashboards New Windshield (I'm sure there's more) Lots of new parts that I bought from the Mitsu Dealer, plus a bunch of used parts as well. As I said earlier, I'd like to sell this as a package deal rather than piecing it out. I would be inclined to work with someone wanting everything. I didn't price out each piece, maybe I'll have to later, but for now all or none..... ASKING $9000.00 for everything listed, plus everything not listed as well. Might be willing to look at trades + cash Thanks for reading and hopefully someone can use all this. I will be updating with pics and more info over the next few days. Let me know if anyone has any questions. Take Care Cullen

Paul, I sent you a P.M.

csdisme@att.net

Put me down for a set of the torque tube bushings.

You can try this place . Reputable transport companies "bid" on shipping your vehicle, and you pick the one you want. Worth a shot

The car has been SOLD. Thanks everyone for your interest.

After rereading my original post I can see why you thought I had an extra set of wheels and tires. I apologize for any misunderstanding, but the 8's and 9's I have are the ones that are on the car that I'm selling.