boostinmini

Hey guys I got a few of my first version tps adapters for sale. These are non finished so i am selling them cheap. They are 100% functioning just dont look so pretty so u can buy one at a saving and trim it down and sand it to your liking. $40 shipped with hardware and o ring but no tps, TPS avail for 25 extra once again these are perfectly function just not cosmetically finished.

yeah it would be nice to have, i am looking for a steel one, kind of an expieremnet and steel is much easier for me to work with

Bump one left, then they will be made on a pre order only status, which takes about a week depending how much time i can find. pm if interested

i was going to go to a water cutting place and see what they will charge to make some, maybe if you guys are interested, maybe it will be cheaper to get a few. or maybe some one has a file for the cutting that the machine shop would use??

hey ull never guess what it was, a loose power steering bracket, easy fix!!

hey just wondering if u know where i could find a flange for the cylinder head to make my own intake. thanks

sale bump

sale bump

hey guys My beloved little truck has started to make a noticable little noise that has me worried. What I have is a 2.6, previouse owner i dont think took very good care of of. I has the balance shafts removed and looks like maybe at some point a reman cylinder head. Engine has almost 300 000 km on it so it is getting up there , uses zero oil though and about 150 psi across the board. Engine has made a slight mystery knock just about idle for the last thirty years and has not really changed. The sound it makes starts at about 2200 rpm and up. It sounds like a rubbing sound, it actually sounds like something is rubbing on the valve cover kind of a rotational noise... could be rubing on the timing cover, hard to tell i need to get a stethoscope to diagnose this I think. Any past expierence or storys, should I just keep driving her till she blows?? I am actually in the process of building a engine so this little guy has to make her only till spring when the new one will be ready.

hey have a small diff ring and pinion 4.22 set from the front of my mighty max 4wd, this set should be in great condition, should work on small diff starions which i believe are the non intercooled ones. 125 plus shipping

hey whats the difference between old and new style? I got a tb unit for a fi swap and it did not have one at all

still have one available

bump have a few sets available still

bump, from what i read this bolts right into the small diffs which i believe is non intercooled starions

For sale Updated, improved and much more "polished" adapter plate kit to use a common mazda TPS in place of the starion one that is almost extinct. This is a update to my previous version, both function 100% the same, this newer one requires less mods to the stock set up and has a very attractive polished finish if you have a dressed up engine bay. This kit comes with all hardware for the install, adapter plat, harness and TPS (Used but tested good) $150 shipped in north amaerica OR The kit listed above minus The TPS so u can get your own either used or brand new off rock auto for about 70 dollars. Kit with out TPS is 125 shipped in north america. If you have any questions feel free to ask and sorry for the pics hard to take a good picture cause its so shiny! For limited time only $120.00 shipped for full kit $90.00 shipped for adapter and hardware and u supply your own TPS and pigtail.

For any one thats interested I have made a few for sale http://www.starquestclub.com/forum/index.php?showtopic=135135 If you are interested please pm me. thanks

there will deff be more i have a few more almost there.... these are hand made by me so each one between plate aluminum to this product is about 2-3 hours... not bad the first one i built trying to figure out the fit took me about 6 hours of trial and error just to get the fit right. If you do want one just pm me and we can go over the details.

i have two kits available, little different finish but exact same function. PM me if you are interested

If you want new, this is the one, there are other mazda ones that fit and work the exact same just look different but this is the more common one. http://www.rockauto.com/catalog/raframecatalog.php?ck[phpSESSID]=1lc36lj6emsu1ll5gucm5t1507&ck[iD]=0&ck[idlist]=0&ck[viewcurrency]=CAD&ck[php_SESSION_ID]=1lc36lj6emsu1ll5gucm5t1507

sure do, its v1 of the adapter, fits basically the same just not as refined as the current one https://picasaweb.google.com/104468856857940425738/December152012?authkey=Gv1sRgCPzzodG2m5K-oQE#5822360156504010866

double post sorry maybe some one can delete

Hey guys Been running one on my TBI mghty max for a month now with zero problems, so I decided to see if there is any interest in any one wanting one?? I know from my own expierence the starion TPS is a rare unit to find in working condition, I actually gave up and decided to think out of the box. So if there is any interets I will be making them as requested https://picasaweb.go...121221952074066 Kit includes -1 Custom made alumnium adapter plate -All mounting hardware -Used but tested good mazda TPS -TPS pigtail I am looking for 100 bucks shipped in north america, if you want to source your own TPS from local pick n pull, they are a very common one kit minus TPS is 75 shipped in north america. If you are interested please PM me or email me at miketeierle@gmail.com, I dont get on here much usually over on 4x4wire. Thanks Mike On sale limited offer i have built a bunch for quick sale $75 shipped complete $55.00 shipped for just the adapter and hardware and u supply tps and pigtail

Hey guys Been running one on my TBI mghty max for a month now with zero problems, so I decided to see if there is any interest in any one wanting one?? I know from my own expierence the starion TPS is a rare unit to find in working condition, I actually gave up and decided to think out of the box. So if there is any interets I will be making them as requested Kit includes -1 Custom made alumnium adapter plate -All mounting hardware -Used but tested good mazda TPS -TPS pigtail I am looking for 100 bucks shipped in north america, if you want to source your own TPS from local pick n pull, they are a very common one kit minus TPS is 75 shipped in north america. If you are interested please PM me or email me at miketeierle@gmail.com, I dont get on here much usually over on 4x4wire. Thanks Mike

yeah 210 seems pretty steep compared to this one that so far has been working great, now i got more features to play with in the megasquirt

mine actually seized solid i tried to fix it but to far gone