TexasConquest

How much did your coilovers run you?

$100 per wheel, which included dismounting, remounting and wheel balancing.

I believe the KYBs are a bit softer than the Tokicos which is why the car sits lower. I've had the springs on for about a month now, but I don't believe that the springs are going to sag. I wasn't selling my wheels, but rather was giving the info for the place that did my wheel polishing.

Tire and Wheel Connection. 9603 Saunders Ln Ste Q1 Austin, TX 78758-5291 Phone: (512) 833-0615

If you call Modacar, they will tell you that they are no longer available. I was looking to put HR springs on my car instead of ST, but couldn't find them anywhere.

The upper radiator hose is from Vann's Auto Parts.

I think that with the *DM exhaust and the lowering springs, you will definitely scrape the exhaust on large speedbumps.

At 19PSI of boost and 93octane pump fuel and on a mustang dyno, 295HP and 324lb/ft. The guys at the dyno shop told me that my car would pull 320+ HP on a dyno jet due to the fact that the dyno jet does not simulate real world rolling resistance.

HR Springs are no longer available.

I have the same setup, ST springs and KYB GR2 shocks.

I have the same setup, ST Springs and GR2 and the car is firm, but not too rough.

Check these out and let me know what you think? http://www.cardomain.com/memberpage/652135/2 TexasConquest

He sold me a complete harness for a great price. Fast shipping too. Thanks.

So here are the pics of the fire damage caused by the cracked brass fitting on the backside of the throttle body. Let me know what parts you all think I will need to change. http://www.cardomain.com/memberpage/652135/2

It is CO2 Intercooler Sprayer, not NOS.