Calquest

Privateinternetaccess (PIA) has worked well for me. Toggle it on/off in moments and connect through servers throughout a bunch of countries. I'm no expert, but it is very simple and have had no issues.

Hey there! I've got a stock 12A if you are interested. http://www.starquestclub.com/forum/index.php?showtopic=148101 turbo #1

pm'd

Doing some housecleaning after the install of an engine so I'll be putting some things up as they come. For now I have 2 TD05-12As for sale The first one (Labeled No. 1) was on the engine that was recently put into my car. I drove on it with no more than 50 miles before taken off and I am unaware of it's previous history. It performed fine. No bent impeller fins, no exhaust side cracks. Shaft has more than average side to side play, no detectable axial play. Works, but I would expect it to be rebuilt (or upgraded ). 90 shipped. The second turbo (No. 2) came off of the engine that came out of the car. It was my daily driven turbo and I serviced it myself by installing new internals (pictured below) Under 1k miles before the engine was pulled. Keep in mind I am not a professional turbo technician, but the rebuild was smooth and executed meticulously. Had no problems with it. No bent impeller fins, no exhaust housing cracks. No axial play, side to side shaft play is minimal and is expected to be so with no oil pressure. Exhaust housing has been very mildly ported in order to get rid of turbo ring. Needs a couple downpipe studs. 150 shipped. Wastegate actuators not included, but may list at another time. Feel free to PM at any time! Thanks for looking! Pics: http://i.imgur.com/5TKJcKRl.jpg?1 1) http://i.imgur.com/fyQhxRWl.jpg?1 http://i.imgur.com/HXOrEQgl.jpg 2) http://i.imgur.com/N8KufHVl.jpg?1 http://i.imgur.com/Rmua5TSl.jpg?1 http://i.imgur.com/nQ5iuGTl.jpg?1 http://i.imgur.com/bGCpUR9l.jpg http://i.imgur.com/sr6skEIl.jpg

Thanks for the tip!

No need to apologize, I think it is a fair and reasonable price. At this rate I may end up getting a set hah. I thank you for the offerings you have for our cars! I'll see about the throw away sleeve, thanks for the idea!

Nice rides man! Must be pretty flat out there! Is that the Crave/Carve? or the SJ HT before they were carbon only? Specialized makes a rad bike. I'm with Johnywadd, We've got hills out here that need to be crushed with buds, but I think need a lighter bike in my quiver than my Trance SX (closest) http://i.imgur.com/4cvzVBUl.jpg

Thanks guys! Ran across google for PN: MU140007 and you are right kev, looks like some dealer sites have it listed so I'll need to check availibility - thanks I saw Greg and Tye's listing, their stuff is top notch, but I can't justify the cost of those without exploring my other options. That would be great if you do have the bolt Jeff! I am in Illinois for a few more weeks so not local right now, I don't think it would be feasible for me to send you the spacer the be repaired haha. PM'd

Looking to by a S.O.A.B. control arm bolt - mine was seized in the hub and had to be cut and then pressed out. (long grade 10 bolt with the notch that goes through the wheel hub and the two flanges of the control arm) http://i.imgur.com/rU4FrYQl.jpg ALSO, i need an INNER metal sleeve for GNT's awesome poly bushing that is going into my ride due to the whole sawing off the bolt process. Here are some pics. http://i.imgur.com/nJp1D36l.jpg Nothing is more precise than a digital plastic HF caliper. http://i.imgur.com/XeZC2bhl.jpg http://i.imgur.com/wvl0Rn9l.jpg

Perfect timing, I'm in for at least one set.

Pm'd

Up for sale: Injectors off of an 88 running engine - thought they were an issue, so replaced them with a set from Joe. Engine ran the same. Not in need of spares. Fresh injector seals $90 Shipped - Sold Sold http://i.imgur.com/Vw8pPQnl.jpg http://i.imgur.com/ud7G0jNl.jpg Next up; a clean sweep tested TPS. Smooth needle movement, no drops, no skipping. Includes male connector $45 Shipped http://i.imgur.com/WuTVvwQl.jpg Everything is first come first serve. Post here for dibs. Payment by paypal. Everything is ready to ship and will do so once payment has been received. Thank you! http://i.imgur.com/1qAIEBEl.jpg

Pm'd

Bump for a MAF-T

Agreed. GLWS monica

That product description is priceless.

PM's Replied

Keep us posted!

Injectors sold!

Pm's replied

Rad, good to know! I could drop them off for you if you would like.

DP sold!

Doing some housecleaning and figured its time to get rid of stuff that just is not going to pan out in the near future. So, up for sale: 3" MK1 Downpipe - $160 shipped. The one 101propose sells (SUS304) New and unused. Opened up the box to see how beautiful it was. (it is) http://i.imgur.com/K64gNxhl.jpg Trilogy Turbos' 650 & 950 injector set (87'-89' application) -$120 Shipped. New, Unused. http://i.imgur.com/diJ1iV1l.jpg Maf-Translator Gen II - 160 Shipped. SOLD SOLD Purchased used, I am not going to be needing it anytime soon. Comes with the Control harness, no Data Logging harness. http://i.imgur.com/bF25SN6l.jpg http://i.imgur.com/qyXhsCul.jpg Everything is packed up and ready to Ship. Have paypal ready, shoot me a PM and post a reply here. Those who have posted a reply here first will be first served. Thanks!

Right on! Let me know how it works out if you end up getting it importwarrior.

Was cruising Fleabay and saw this intercooler CXracing is putting out there for our cars, Thought it may be useful for somebody. http://www.ebay.com/itm/181528362227?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT