Toyotagt1
-
Posts
85 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Gallery
Everything posted by Toyotagt1
-
it will be taking me awhile to get parts ready and shipped there has been some bad weather here which is making everything go slower plus i have been called into almost everyday this week so sorry for the delay guys
-
pm'ed
-
they look fine worked just fine to both shipped with brackets i can do $65 shipped
-
ok i have those idk what there worth just send me an offer
-
pm'ed
-
how does 40 shipped sound do you want the red or grey ones
-
pm'ed
-
i have all of these parts but what do you mean by front valence do you mean the airdam if so both cars airdams are not in good shape but the red one can be fixed
-
i might have 1 set of 86 injectors i will have to go through my parts
-
none of the side vents are black but i do have 4 sets in other colors you would just have to paint them black and what style do you want flaty or widebody and i might have a second set of black seatbelts but if not i have a possible buyer but your next in line
-
you mean the switches on the sides of the gauge cluster if so yes i have 2 sets in good shape but do you mean just the switches or the complete piece that goes around the cluster?
-
I am parting out 3 starquests 2 are 84's and 1 86 all do not have engines but i have alot of extra engine parts and such but all of them have transmissions plus i have a ton of extra parts in my garage. The red 84 is a 5 speed and has full black leather interior which for the most part is in great shape other then the front seats and this is a ls model i believe it had a lsd and the velnas system which is still all there. http://i37.photobucket.com/albums/e91/toyotagt1/710_zps47daf647.jpg http://i37.photobucket.com/albums/e91/toyotagt1/714_zps69921a04.jpg i have all 4 mudflaps in great shape and have all 4 stock rims that are in great shape http://i37.photobucket.com/albums/e91/toyotagt1/716_zps05fb8261.jpg http://i37.photobucket.com/albums/e91/toyotagt1/717_zps83cdd144.jpg http://i37.photobucket.com/albums/e91/toyotagt1/741_zpse2c09240.jpg http://i37.photobucket.com/albums/e91/toyotagt1/745_zps6beb537c.jpg it also has a windshield that only has 1 chip in the lower right corner (Pictured Below) http://i37.photobucket.com/albums/e91/toyotagt1/748_zpsa4bc8541.jpg The Grey 84 is a automatic(have everything to make it a 5 speed) and has full red leather interior with the digital guage cluster. The car itself is in great shape inside and out and would hate to crush it but i need these cars gone. http://i37.photobucket.com/albums/e91/toyotagt1/711_zps52ada565.jpg http://i37.photobucket.com/albums/e91/toyotagt1/750_zps6e046723.jpg has perfect wiper cowling no cracks or nics http://i37.photobucket.com/albums/e91/toyotagt1/751_zps2f578cda.jpg has perfect condition tail lights with a turbo hatch which also is in perfect condition http://i37.photobucket.com/albums/e91/toyotagt1/754_zps2fdb1509.jpg digital cluster works and is in perfect condition http://i37.photobucket.com/albums/e91/toyotagt1/761_zps5f12f119.jpg The Champagne 86 is a 5 speed and has full perfect condition black leather interior. http://i37.photobucket.com/albums/e91/toyotagt1/710_zps47daf647.jpg http://i37.photobucket.com/albums/e91/toyotagt1/724_zpsf7feea57.jpg http://i37.photobucket.com/albums/e91/toyotagt1/728_zpse0bd47d6.jpg http://i37.photobucket.com/albums/e91/toyotagt1/729_zps6ce1174d.jpg dash is back seat and is in perfect condition http://i37.photobucket.com/albums/e91/toyotagt1/730_zps9b19889c.jpg All pics can be seen here http://s37.photobuck...otagt1/library/ what ever you need just message me on here or call or text me at 541-639-1395 my name is max i need everything gone so i am selling everything on the cheap or trade i am looking for a rear hatch wing 83 hood etc just let me know what you have
-
im looking for a complete poly bushing kit let me know what you guys have thanks
-
hey guys im looking for some parts for my starquest 1. turbo to intercooler hard pipe 2. g54b upgraded camshaft that works with a stock non jet valve head 3. rear camber plates 4. front and rear sway bars 5. front and rear strut tower bars
-
like jeff was saying i have a 84 parts car that i would gladly sell you the caliper brackets
-
yea so far no one wants it locally sadly he has to get rid of it by the end of the month or its getting scraped sadly
-
the engine is in the car and yes it comes with engine and trans and message him for more details like pics and such
-
my friend has a 1985 Mitsubishi Starion Narrowbody that he started to put a Ford 302 swap in. his daily broke down and now has to get rid of it sadly so he needs to sell it asap the car is located in Redmond, OR the car is very straight and clean hes looking to get $800 OBO thanks guys heres his Craigslist add http://bend.craigslist.org/cto/3739699639.html
-
i will be posting pics once i start the swap right now im just gathering parts and i have changed my attack plan im going to be using the starion crossmember which i will cut out and install 240sx rack mounts with a s14 rack and from there me and my friend will be modifying the starion lca's which will include extending, boxing them in and notching them and we will be modifying the stock knuckles for maximum steering angle and ackerman adjustment along with minimum bump steer cant wait to start this and btw people who have done the swap what did you do for the power steering lines did you just use normal p/s line or do you need a ss line for the pressure line and how did you connect the rack to the steering column thanks
-
traded some parts locally absolutely no problems great guy to deal will do again
-
well i have decided to go a different route i am going to use the stock cross member and weld in the 240 rack mounts so i can use the stock lca's and knuckles but my friend is still going to modify my knuckles and lca's to make a full angle kit and once we get everything in place and messurements right we would like to offer the kit to anyone who would be interested in doing the 240sx rack swap and full angle kit i am excited to see where this will go we will find out the only real questions i have is how people do the p/s lines like can you just use normal p/s line or dose it have to be metal thanks
-
that is quite brilliant i will be doing that also
-
yea i noticed that so what i am going to do now is still use a s13 cross member but use the complete starion motor mounts on each side with the stock bolt hole locations and yea i know its a press fit i was just wondering if either a s13/4 will fit the stock knuckle without drilling the hole out
-
ALL LOWERED STARQUEST POST PICS!
Toyotagt1 replied to gottraction's topic in Rims, Suspension and Brake Mods
as she sits nothings rubs or bottoms out to be honest theres actually alot more room and can be lowered 2in more and i am only running camber plates up front as i am using d2 coilovers -
so im doing a s13 rack n pinion swap using a s13 cross member just re drilled the mounting holes to fit a starion, welding on the starion motor mounts to it and using either s13/ s14 lca's that i will box in and re drill holes for the tension arms and sway bar. so now before i start the full swap i have a couple of question for people who have or now how to do the swap which are how do you connect the s13 rack to the starquest steering column i was just thinking of welding the end piece of a s13 column to the starquest one but idk if it will be the right length and the right angle can be made, what do you guys do for the power steering lines do they have to be ss lines or dose just normal rubber p/s line work and what ball joint fits the starquest knuckle a s13 or s14 or do you just have to re drill the hole. any help will be greatly appreciated thanks