justinfee101

Got is started.. Car was flooded, after i dried the cylinders and replaced the plugs it fired right up.. Drives great now just has a rough idle when the car is warm.. The o2 sensor has not been replaced so i was going to start there.

Also is this the dot you are talking about? Because it is about a tooth or two off.. If i need to move it i will. http://i36.photobucket.com/albums/e35/jfee101/2012-05-09_20-42-19_304.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-09_20-42-48_733.jpg

Car will not start and i am trying to find the issue. I was following what the book said to set the timing but i wanted a second opinion. I have fuel, spark and compression but it is not firing or even stumbling.. plugs were wet when i took them out this morning after trying to start it last night but even so i think it shoulda at least fired a little bit..

Would just like a second opinion.. http://i36.photobucket.com/albums/e35/jfee101/2012-05-09_09-22-07_867.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-09_09-22-21_359.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-09_09-24-26_100.jpg I have fuel and spark and great compression so i am guessing/hope this is the issue..

Thanks Indiana I got all my parts from Dad on friday so i put the engine back together triple checking all the clearances and replacing the Rings with Hastings Getting a TB Kit and SS Hex head bolts and a few other things and i got her all back together by sunday afternoon Flopped her into the bay by 10pm and called it a night. I also went and bought an Ohvp and 1G Maf from D-Venable Friday too.. But im sticking with the OEM Maf until i can afford a A/F meter All i need to do is hook up the Driveshaft and time it and i should be gtg! pic of her bolted in and lines attached I took some time on the engine bay when i was waiting on parts.. http://i36.photobucket.com/albums/e35/jfee101/2012-05-05_06-12-02_13.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-06_21-11-31_912.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-06_22-19-19_356.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-07_16-40-44_429.jpg

Everyone was pm'd.. Thanks to those who bought and responded..

I will look into shipping today on tbe struts.. Will ldt you know tonight

Shipped out a few things today.. Let me know if any of you guys are interested in anything else!

Clock and Fuseable link relay tree are gone.

I feel horrible for this car.. :/

any sound clips?

Did not want metal shim headgasket. I do not have the money to spend on Studs that are recommended for that gasket Thanks though

Alright, Just got my Ajusa Head gasket from Tep for 48 Bucks Dad Sent my order yesterday so i should be able to put this beast back together soon! http://i36.photobucket.com/albums/e35/jfee101/2012-05-03_13-12-45_910.jpg

Pm'd Everyone

Also have a Full Harness for the 87 2 sets of motormice tracks, belts and motors Full set of seat belts for front and back 2 front seats from the 88 with the high louvers on the sides Full set of Non-SHP rims Intercooler and Radiator with fans will seperate if needed Valve Cover will take pics of the rest of the items tomorrow in the daylight. Edit: Almost forgot this 60K and works Make an offer on this. Or else i will post a price on it tomorrow evening when i find out info http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-12-10_863.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-12-17_667.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-12-44_142.jpg Shipping Items with Usps Flat Rate Boxes 5-15 dollars shipping for most items and the intakes should fit in 15 dollar boxes All electronics work 100% i will refund amount if you have issues plus shipping if sent back. IF THE PRICES ARE TOO HIGH PLEASE MAKE AN OFFER! I am very leaneant. Either PM me, Call or Text @ 651-270-1860 - Pref. Text or Call and Leave message if i don't answer as i work weird hours. Thanks, Justin

87 Door panels in excellent condition. from a car that only had 60k 30 Each will look into shipping http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-06-17_57.jpg will clean em tomorrow and post new pic as they are dirty from dust in garage Rear hatch struts 15 Each both have good pressure as i cannot push them down very far without too much pressure. http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-06-07_943.jpg Non leaking PS pump and overflow 30 bucks will look into shipping http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-06-34_603.jpg Skid plate 10 bucks will look into shipping.. http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-06-26_889.jpg Coolant OF Brake OF and AC Bracket 10 for Coolant OF and 5 for Brakes. will look into shipping if wanted. http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-07-00_607.jpg 2 working ABS Units 20 bucks for 87 30 for the one i just took out of my quest that i know works. will look into shipping of unit http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-07-11_231.jpg AC Lines and Fuel lines with Banjo Fittings/ Bolts 10 for ac lines shipped and 10 for fuel shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-07-29_390.jpg 3rd Eye 7 Shipped Window switches 25 For the set shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-07-51_24.jpg 2 good Intakes 30 each will look into shipping of items if wanted http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-08-11_795.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-08-26_522.jpg Center console plate 7 shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-07-58_333.jpg Oil Caps with seals 5 shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-11-21_454.jpg Exhaust Manifold 50 Bucks will look into shipping http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-13-22_708.jpg Top Computer Best offer I think it may be for the seat belts Speed control 25 Shipped Bottom middle best offer G Sensor 7 shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-13-50_626.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-13-58_324.jpg Also sorry for the long list. I will improve on it in the next couple days..

Alright. I need my conquest done so i can sell my Crawling Jeep, get over 12mpg and actually get enjoyment out of driving. And to do this, I need to dip into some of my extra parts. I will list all my parts available with pictures and take em off when they sell. All parts are from a 87 Parts car with only 60K on it. Also most of this stuff will fit in Flat Rate boxes so shipping should be cheap. I will find out shipping on most items same day or when i can get to the post office and give the measurements and weight of item if not flat rate. If no price is listed make an offer as i am oblivious on pricing atm on that item http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-02-57_824.jpg 87 ECU 75 Shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-03-27_350.jpg Pod with Working buttons on sides 100 http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-09-35_420.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-09-25_571.jpg http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-09-10_192.jpg 87 Rear window wiper motor 25 Shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-03-22_413.jpg 87 Door window motors 80 pair shipped or 50 shipped each http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-03-17_536.jpg 87 Door lock Actuators 60 Shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-03-52_274.jpg Upper throttle body 40 Shipped 10 more with lower pieces too http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-04-00_75.jpg Hatch lock (top) and popper? make an offer http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-03-42_448.jpg Antenna with relay 50 shipped Distributor cleaned and checked 40 Battery tray? http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-04-27_897.jpg Relay tree 5 bucks http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-04-07_869.jpg Misc. and silver bar, ignitor? http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-04-17_218.jpg Bearing caps cleaned and shiny with good bolts http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-05-05_332.jpg Fog light assembly's no cracks and glass is crystal clear 100 shipped obo http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-04-45_203.jpg Pop up headlight assembly passenger side 100 obo will need to look into shipping http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-04-57_247.jpg Washer fluid tanks front and rear with pumps in each. 20 for both plus shipping http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-05-32_788.jpg Automatic shifter and linkage (have more on the automatic trans sitting in garage) that also for sale. http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-05-38_90.jpg Windshield wiper motor 30 Shipped http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-06-01_396.jpg Timing and rear main seal cover 20 For front 5 For rear will look into shipping http://i36.photobucket.com/albums/e35/jfee101/2012-05-02_21-05-45_776.jpg

Synchromesh from Pennzoil is a good fluid to use with the.manual transmission.. Anx its fairly cheap at 7 bucks a pint at o`Reilys

Just read through the whole thread... Love the setup you have Joe! How is everything running? Did you get the tuning figured out?

I also inspwxed block and it looks no scaring. No grinding waz coming from engine before dismantling engine.. Everything should be going back together this week when I get the parts.. Ill keep this thread updated on progress. Th anks for tthe help guys.

Dad, send my order through as is. Everything is good at standard spec with new crank. thanks again, Justin

Might want to hold off on my order then Dad. Idk if you can but ill let you know the oversize i need on monday.. Thanks, Justin

Your right. The crank does need to be replaced. http://i36.photobucket.com/albums/e35/jfee101/2012-04-28_19-06-34_566.jpg But it does look spiffy. http://i36.photobucket.com/albums/e35/jfee101/2012-04-28_19-05-58_254.jpg Too bad i wasted the 40 bucks on polishing the wrong crank.. this one needs to be polished too.. http://i36.photobucket.com/albums/e35/jfee101/2012-04-28_19-06-59_433.jpg But i do have a good thrust surface on this one. http://i36.photobucket.com/albums/e35/jfee101/2012-04-28_19-06-43_700.jpg

I heard that the tep metal shim headgasket was from ajusa but idk..