mitsubishiguy

That would be the switch. Turn signal wiper operation.

About half way through my project. Got the wiring under the dash all done. Got 4g63 all mounted and all things fabbed up, just missing combination switch on the steering column. If anyone has one please let me know. Thank you, Songsay P.S. shipping will be to 99518

Did you ever sell this? I need one. Please let me know, thank you.

body harness? is that the wiring inside the drivers compartment? i am looking for the wiring that runs inside the engine along the drivers side fender into the interior of the car. hey if it works it works. i know very little about this car, im very newb to starquest but not newb to mitsubishi. thanks for your help.

Seems like a popular demand on the club these days. I need all the wiring that is in the engine bay and travels into the passenger compartment and connects the dash and fuses and all that stuff. The project car I acquired had no wiring. I have a 4g63 mounted in now with the dsm wiring and no starion wiring to wire it to. please let me know thank you. Songsay p.s. shipping will be to 99518

AlaskaConquest, i sent you a pm.

Need the engine wiring that hooks up to the headlights and that main relay in the engine bay that leads into the car and connects to the main fuses, need those also. Then it continues on to connect to the ignition and everything else behind the dash. My car has no wiring in it. I acquired the vehicle this way. So pretty much the entire front clip wiring. There is NOTHING local. Please let me know if anyone has pulled the wiring from any cars they crushed. Thank you. Songsay 1988 Conquest Tsi Fiji Blue SHP 4g63+w58

I ended up with Jeff's car. It sat for a few months while I gathered parts for the 4g63. It really was just the shell. Not much wiring and stuff, just a few basics. I had a 7 bolt 4g63 layin around, i purchased a w58 from an 85 celica from a junkyard up here. got the clutch from a local clutch shop, had the flywheel machined for the trans shaft. got seats out of an 83 starion. got wiring from a 93 talon and also an eprom ecu. got a few more parts from DJpowerhaus, but from further inspection it looks like i may need more stock starion wiring to complete the swap. its funny how me and Jeff's car lineup was, 3000gt, galant vr4 and starion.