Spooled_Starion

I might be interested, what year is it? What condition? Leak or need anything?

Looking for another starquest 5 speed only must run and not leak any fluids. here is a link to my craigslist ad, if anyone might be interested in trading or if you know anyone who might be interested PM me or reply through the craigslist ad. Thanks http://medford.craig...3940985653.html

Welcome to the forums post some pictures!!!

Congratulations! 51k nice find!

Welcome to he forums post some pictures!

I've been seeing a lot more Starquests as of recently around Medford, just wondering if any of you members happen to be local... If so I'm thinking about BBQ and photoshoot!

http://sfbay.craigslist.org/eby/cto/3036060819.html

Not mine but defiantly a worthy price for someone interested. http://sacramento.craigslist.org/pts/3036532666.html

Welcome to the addiction

Also if your looking at building a 4g63 there's a book called "How to build max performance mitsubishi 4G63T engines" I used it when I built my 6 bolt talon motor. It's very very informative and you can get it for like $10 at Barnes and nobles. Also idk how much you know about these motors but if you can try to get a 6 bolt motor as 7 bolt motors tend to "crank walk" Good Luck!!!

You gonna keep it SOHC or swap a 4G63 head and get a stroked DOHC? With the 63 head and 64 block that is a recipe for lots of TQ and fun. What are you going to tune with? Im almost wondering if DSMLink V3 would work with some custom wiring. I would recommend converting it to Speed Density and running a MAP sensor it will be easier to tune. Good luck!

Welcome to the forums and good luck on your quest search!!!!

X2

Meeee tooooooo!!!!!!!

How much vacuum Are you pulling at idle? I run a can of Seafoam through all of my cars when I first get them and it generally helps with drivability and smoothness. What are your plugs gapped at and which ones did you put in her?

From my understanding an 86 is like the red headed step child. A 1G DSM MAS won't work with an 86 harness (86 mas is a 4 pin connector while a dsm maf is a 7 pin connector.) people like the 86 because it's lighter than the rest. 60psi per cylinder is really low and could quite possibly require new valves/rings. If I am wrong someone should correct me but thats just my understanding.

I love your car!!! Post more pics what kind of rims are those and what are their specs?

I used a 1g dsm Gauge pod on my starion but mine was only a double.

Head gasket

Welcome to the addiction

Just clean it really good and rough up the surface with some fine grit sand paper and use some high temp BBQ paint. Worked great for me. A friend of mine used regular spray paint and when his exhaust would get hot it would smell like his muffler was burning.

Welcome to the forums!

X2

White is steam which generally means its burning coolant/water. Black is fuel and blue is oil.. Generally. As far as i know.

It's on the drivers side door jam.