Laodicea

Yeah...I have looked at those wheels in the past looks great. I like the "D" shaped hole spokes a lil better. I have some wheels coming in next month when they arrive in the states 15x10 -44 rears

Sigh....I am glad you are doing this because I have been wanting to chop mine to superwide. Now I am getting inspired more! Looks good.

Yep looks good man...kinda looks like my bracket. http://i156.photobucket.com/albums/t18/gr8white1/2JZ%20Project/DSC01086.jpg

Hmmm flatty or fatty...50/50 I might as well go gambling...j/k I am gonna pick up some here locally after this guy takes them off.

What do you mean?? The throw out bearing pressure plate and clutch disk all go onto the input shaft first...then you put the shifter fork in...then you put the tranny up to the engine/flywheel and bolt it on through the little access windows on the sides of the bellhousing....or did you mean something else?

Yes they are..they will come in a pair or all four pieces.

Got 5 pair available.... Polyurethane Shore 80a. These are a little softer than Stedebani's Black bushings and they do not have the grey foam in the middle. I had Stedebani's shore hardness tested on the black ones and they were at 85a. These I made are 80a. $75 for a pair of tops and bottoms (4 pieces) shipped http://i156.photobucket.com/albums/t18/gr8white1/Molds/DSC01376_zps5e7ed6d6.jpg http://i156.photobucket.com/albums/t18/gr8white1/Molds/DSC01377_zps712e183d.jpg http://i156.photobucket.com/albums/t18/gr8white1/Molds/DSC01378_zpsf8f05404.jpg

So far I made some polyurethane ones out of Shore 80a.. so those are available now.....still need to take subframe off car to make the aluminum ones to size.

Seems to bulky..at least the ones I have seen..S2000

Yes I made a kit that takes the 240sx rack and bolts it on...only the steering column is welded on. However trying to use the swivel you showed would be hard to line up perfectly straight and weld together. There are better options that are easier too.

Need a pair of front unmolested steering knuckles.

I have a stock one I took off mine ...seems to be in good condition but I am not 100% sure. I took it off when I put on my 240sx steering kit. Let me know. Or you can go with my 240sx steering kit.

Well you cannot weld that chrome one....it would be better to use a 3/4 ball swivel impact grade. Like this http://ecx.images-amazon.com/images/I/31mRWBiH0yL._SL500_SS500_.jpg

$450 for the two rear struts? WOW. Cause you can buy the fronts all day long for $50 each.

Where you at on this?

Now that's what I am talking about. And I see you already have several items to purchase. Thanks. Dax

We need more people who have some $$$ and like to do these things for the Starquest for a hobby and not a profit. I being one of these people have started to do this....however I need help from some others who have more expertise, skills, and or tools to get it done.

I was there two weeks ago....passed by your house...and sent a txt....I guess that is not your number anymore cause you didn't respond. I am gonna hack mine up first before I get another one and see how it turns out.

Man I coulda picked it up when I was there....

The only one I have ever seen on a supra of that year....though someone put it on this rx7. http://www.rx7club.com/attachments/1st-gen-non-technical-207/411131d1290217963-where-find-spoiler-hatch-spoiler-jpg

Where are the OTHER MKII supra type? Are they made anywhere???

Well well well...I thought I recognized that burn paint above the turbo from many years ago...

We do not need to reuse the inner bushing or the outer two shells. I need the I.D. of the bushing and the I.D. of the frame where this bushing will go with all the material cleaned out so I can finish these I already started. I have a feeling that I need to measure a subframe in hand myself so I can fine tune the cut. Hopefull make a nice tight fit with minimal sanding if any. I just dont have one laying around.

It will poke out 40mm more http://www.willtheyfit.com/index.php?width=215&aspect=50&diameter=16&wheelwidth=7&offset=18&width2=225&aspect2=50&diameter2=16&wheelwidth2=9.5&offset2=10&Submit=Submit

You are golden!!! I will make some.