xxx87quest24psi

This is the same car, But i dropped the price and couldn't get the full edit to work so I did it this way... I have a 87 conquest with a 4g63 swap started for sale, This car is a mint Arizona car No rust...! Need's a new front bumper, air dam and rear bumper that's it..! Otherwise this car is straight and clean, the clear coat is peeling a little bit and could use paint.. It even has good tire's. But now for the good part.. I started the 4G swap it is in the car and mounted to the stock Conquest tran's...!!! I made a tran's adapter plate.. It's a 91 6 bolt motor with 80,000 mile's RAN awesome. I have a Garret TO4 turbo for it oil feed only.. The intake is flipped to work and rewelded, I've got the 4G wiring harness and most of he other part's to finish it. All you'll need is injector's, clutch, timing belt, other small odd's and end's plus an ECU to get it running.. This is my second 4G63T swap i've done ran outta money on this one haha... This is a steal most of the hard work is already done, you just need to bolt some thing's on.... If interested please call me at 815 291 4122 my name's Aaron Sorry I can't post picture's my computer is a pile of junk... but I can picture message from my phone if you text me or email them to you $800 obo

I would be willing to deliver the car for the cost of fuel plus a little... I would like to get 800 hundred for the entire thing, all part's included and half a car's worth of body part's and glass

I have a 87 conquest with a 4g63 swap started for sale, This car is a mint Arizona car No rust...! Need's a new front bumper, air dam and rear bumper that's it..! Otherwise this car is straight and clean, the clear coat is peeling a little bit and could use paint.. It even has good tire's. But now for the good part.. I started the 4G swap it is in the car and mounted to the stock Conquest tran's...!!! I made a tran's adapter plate.. It's a 91 6 bolt motor with 80,000 mile's RAN awesome. I have a Garret TO4 turbo for it oil feed only.. The intake is flipped to work and rewelded, I've got the 4G wiring harness and most of he other part's to finish it. All you'll need is injector's, clutch, timing belt, other small odd's and end's plus an ECU to get it running.. This is my second 4G63T swap i've done ran outta money on this one haha... This is a steal most of the hard work is already done, you just need to bolt some thing's on.... If interested please call me at 815 291 4122 my name's Aaron Im posting a bunch of picture's a little later $800 obo

I have a 87 conquest with a 4g63 swap started for sale, This car is a mint Arizona car No rust...! Need's a new front bumper, air dam and rear bumper that's it..! Otherwise this car is straight and clean, the clear coat is peeling a little bit and could use paint.. It even has good tire's. But now for the good part.. I started the 4G swap it is in the car and mounted to the stock Conquest tran's...!!! I made a tran's adapter plate.. It's a 91 6 bolt motor with 80,000 mile's RAN awesome. I have a Garret TO4 turbo for it oil feed only.. The intake is flipped to work and rewelded, I've got the 4G wiring harness and most of he other part's to finish it. All you'll need is injector's, clutch, timing belt, other small odd's and end's plus an ECU to get it running.. This is my second 4G63T swap i've done ran outta money on this one haha... This is a steal most of the hard work is already done, you just need to bolt some thing's on.... If interested please call me at 815 291 4122 my name's Aaron will send picture's if you ask thank's

Yo guys if your interested in talkin to me bout my swap, I would be more than interested in helpin any fellow 4G conquest guys. You can call me at 815 291 4122 weekdays after 5 OR any time weekends. Always willin to help

Yo man i got all the information you need to do this swap mine is a running swap to, manual too

YEAH that would be awesome!!! I wanna put my TT VG30 in a quest but ive run outta cars to swap motors in LOL

I need that air dam and bumper cover if you still got them How much shipped to 61089 thanks bro

So me and my brother just got done putting a CA in his S13. And it pulls.......!!!!! hard!!! He's maken 265whp and getting 35 mpg on 92 pump gas. Altho it doesnt pull as hard as my 4G on E85!! its still preaty crazy for a 1.8L motor.. I see a RB25 swap is in progress, But a CA is just a little RB its three times smaller and extremely light weight!!! I no its not a mitsu motor BUT I just picked up another conquest so i think i might just do it. Its just a idea let me no what you guys think!!??

I cant figure out how you guys get more than two pictures up. mine are off my phone does that make a difference?

yo dude check out my post 4G63 trans adapter and motor mounts

Um why would you paint the intire thing black and chop the cover? but it looks good i made a intake for my buddy last nite for his quest and i just flipped the ends on mine if thats any help to you it works great! no offense meant with the hole paint thing just askin

im real sorry boys ive been helping my wife recover from a long battle with cancer and working so not much time to reply and get pics up im hopeing i can throw those long awaited pics up in a lil bit

hey guys i would like to get $4500 for my truck and live in winslow il 61089 im getting picks up tomorrow and no it isnt flexfuel (ethanol) but it gets 22mpg

WELL BOYS THE DAY HAS COME THE PICS WILL BE UP TOMORROW!!!!!!!! the price is still being decided on but to be determined very soon... the list of parts needed are as follows 4G63 flywheel and pressure plate and G54B clutch plate stock 4G starter and an assortment of bolts that i am planning includeing with my plate im sorry it took so long the wife was in the hospital so i had no time between work and her sorry boys!!!! the plate i will have pictured is my first rough cut one that i made for a guy that was not at all picky and just wanted to bolt it together no chanfered counter sunk bolts lol like i said not at all picky mine which is in my car is better looking lol more time spent on it if you wanna no about the way i plumbed my coolant system and what not let me no thanks

:hmm3grin2orange: yo bro's i have two more trans adaptors made let me no if you want um il be fabn more solid cromoly motor mounts this weekend to if any1s interested

Hey man my buddy wants your car if you still got it when would it be cool to come look at it?

Yeah I no its not a quest lol but I have a 01 S10 xtreme for sale if anyone is interested.. its a 4.3 V6 auto trans, extended cab, stepside, dark blue, with a few mods, k&n cold air, borla stainless exhaust, chipped.. it runs and drives awesome It has clear corner lamps, euro tails and a billet grille I need it gone so i can finish my quest Il get pics up soon any question pm me

Yo man im maken two as of rite now let me no when you would want one im not sure bout the cost but il let yall no :hmm3grin2orange:

Yeah i no but i used a 6 bolt narrow block outta a talon and its just alil easyr to find out where i live Lol

Yeah guys im working on maken two right now ive just been real busy sorry but i will get some pics and prices up soon

Wow 472 whp stock bottom end and heads!!!.... um i build LSx motors they will handle that and more horse but not for long. the crank will handle 700 hp tho and by the way your numbers are alil out there.....

Yeah but i wanted a 63 not a 64 lol