Zeljko

Well thank you Yes, I know I know that I will find other stuff on my Mits to replace First thing is to take care of rust, I have to collect my money and go to body mechanic, I think that it will not be cheap .

Well, I am aware of that but also I am prepared , I know that shiping costs can be big, but I dont have a lot of options, either you or Japan but you are closer . So how much would it be a regular shiping for 02? 30-50 usd? or more?

Hi all, another "problem" my Power Steering pump is leaking, so is there a chance to repair that or I have to buy a new one? Maybe a new one after 20 years of running will be a good choice . Thank you!

Thank you, I just put it on Wanted parts subforum

Its for my 1988. 2600ccm turbo Mitsubishi Starion Notice: I live in Zagreb, Croatia. So for any possible seller just to let him know

Hi Thank you mikec for so many advices as to you all thank you! 2Caliber308: yes, I am new to this engine If you ask me about boxer engine from VW Beetle I am expert there, but 2.6 turbo new for me. So i need new 02 sensor, yes I know I dont have one that works where to find that? ebay? Is 02 sensor conected to fuel consuption? "What is the small hose zip-tied to the valve cover rear breather port pipe? In the pic, it's the small white dash running left-right, roughly above the #4 cylinder spark plug. The metal pipe is for the oil separator system - a stock part... but what's the upside-down "U" shaped hose zip-tied to it?" I dont know what you mean please can you show it on my picture? Sprak plug wire is from Toyota Corolla Ae86 (my previuos car) hehe About secondary air box, it is on and working, so I didnt touch it My moto is, dont touch if it works hehe Should I remove it? I will test distributor vacuum advancer, so I will see is it ok. Well the engine is stock, and I wont change it ,it is good for me . Thank you all again And yes I have A/C in leevers.

O2? where is that? hehe Thank you all! I saw that i didnt answare about my car, the year is 1988. model? I dont know widebody with 2600ccm turbo. It is not Conquest, it is Starion, with regular manual A/C, not automatic as is in Conquest.

Hi guys, thank you all for help We have boost 0.5-0.6 kg/cm2 Problem was so simple, that I cant belive it http://img515.imageshack.us/img515/8729/hpim2988yl2.th.jpghttp://img515.imageshack.us/images/thpix.gif I mark it with red! Intake tube was not in place , so air was everywhere but not in turbo . Thank you all! p.s. now I have new experience

Thank you all for your help I will see this first thing in the morning, I hope that this is a problem

Hi, thank you for your fast reply, but how does that wastegate look like?

I think I have a problem with turbocharger, but very strange. Well turbine works, you hear the sound you have to hear but the car is not behaving like he has to. He hasnt have the force what it should have. So now one member here is selling me MAS. But maybe there is also a problem with tubes ? Turbo is not covered with oil, it is not beahaving strange or make strange sounds but he doesent make 0.5 kg/cm3 on full throttle. Any suggestions? So in short: Turbo sounds ok, and cars sounds ok but it dosent run with full power and gauge doesnt show 0.5kg/cm3 as he should. Thank you all

Hehe thank you guys! I think that there is only my Starion that is driving in Croatia. It was imported from Belgium.

Hi guys these are 2 relative new pictures of my Mits http://img99.imageshack.us/img99/1021/dsc0012dv7by0.th.jpghttp://img99.imageshack.us/images/thpix.gif http://img264.imageshack.us/img264/1471/dsc0019ba4lg7.th.jpghttp://img264.imageshack.us/images/thpix.gif

Well thats bad , I will see is it so dangerous.... Thank you all for advices! 2Mech: my friend move it from Belgium to Croatia. I have diplomatic status in Croatia, so I didnt have any problem to register my car.

2Mech: My Starion is originally from Belgium. I think that there didnt sold in Croatia. In my Starion name, thank you I am taking good care of him . 2Fanta: I live in Zagreb (capital city of Croatia), 400km from sea, so thats not a problem. Maybe cold winters, I dont know. But I think that there is an issue, because I have feeling that panel under door is "closed", and from wheel ther goes water in that , should I say "tunel" and there water stays. I will know a little more after I visit my mechanic. But does Starions have problems with body? Does they rust a lot? Thank you all!

Thank you for reply, well it isnt so bad, but i think that there is problem there, water is comming from somwhere and it stay there generating rust. I will go to my mechanic, if it can not be saved, I will contact you for a new ones But, my question stays, is this common problem on widebody?

Hi guys , as I posted on austarion.com Here maybe you can help me more, because I have widebody. Guys, I have a rust problem My car had a paintjob 2 years ago, and this year rust come Picture tells 1000 words, so I marked where little annoying rust bubles come: http://img100.imageshack.us/img100/939/dsc0012dv7yu2.th.jpghttp://img100.imageshack.us/images/thpix.gif I saw that this lower part of wide-body is closed, and maybe there is water that is gather there and little by little "eating" my car with rust. I know that here isnt so much widebodyes, but maybe you can help me how to stop this rust? Tinman can help? But what is final solution? little wholes so water can go away? Thank you all!

Nice drawings I love the drift style and this picture with ?

Sorry guys Air Flow Meter or MASS

Hi guys, I am an old member of austarion, and people there recommended this forum because I drive 2.6 liter widebody 1988. Starion. Also a big problem I live in Croatia, and I am a only driver of Starion (maybe there is 1 or 2 more but not driving and I dont know where they are). So my car is runing without AFM, and regarding new gas prices I have to put a new one. So is there anybody who will sell me AFM and send it to Croatia? I can pay by paypal. Thank you!